• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.547-552
• /
• 2003

In this thesis, interference phenomena of bluetooth networks requiring Security were minimized; strengthened security of piconet by assigning an identical PIN code to bluetooth devices, which was establishing a specific piconet during authentication stage. To establish a bluetooth piconet system. an unique ID was assigned to each bluetooth device, communication algorithms having different data formats between devices was designed, and an embedded hardware module using ARM processor and uCOS-II RTOS was implemented. About 30% of CPU efficiency in the module was increased by modifying functions including block parameters to work as nonblocking; by the increased efficiency of total piconet, the module could be used as an access point. The module could transmit maximum 10 frames of image and also audio signal by switching the packet effectively according to channel condition. By above-mentioned process, video, audio, and data could be well transmitted by the bluetooth managing program and the possibility of a commercial remote control system using bluetooth technology was suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2113-2119
• /
• 2006

In this paper, we design the r-Sensor protocol for reliable data transmission in the Intelligent Home Service based on the wireless sensor network environment. The r-Sensor protocol improve the reliability of data transmission and node fairness using simple routing algorithm, congestion control, and loss recovery method that minimize the load of relay node. Reposed routing algorithm find out upstream and downstream nodes using the Network Management packet. Meanwhile, loss recovery algorithm uses the Aggregated-Nack. To apply supposed algorithm, the IHS-AMR(Intelligent Home Service - Automatic Meter Reader) and sensor node are designed and implemented in hardware. The IHS-AMR provides remote metering service and also offers home safety service by internetworking with sensor network, mobile phone network and internet.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.54-75
• /
• 2011

PoC(Push-to-talk Over Cellular) is an integrated technology of group voice calls, video calls and internet based multimedia services. If a PoC user can not participate in the PoC session for various reasons such as an emergency situation, lack of battery capacity, then the user can use the PoC Box which has a similar functionality to the MM Box in the MMS(Multimedia Messaging Service). The RTSP(Real-Time Streaming Protocol) method is recommended to be used when there is a transmission session between the PoC box and a terminal. Since the existing VOD service uses a wired network, the packet size of RTSP-based VOD service is huge, however, the PoC service has wireless communication environments which have general characteristics to be used in RTSP method. Packet loss in a wired communication environments is relatively less than that in wireless communication environment, therefore, a buffering latency occurs in PoC service due to a play-out delay which means an asynchronous play of audio & video contents. Those problems make a user to be difficult to find the information they want when the media contents are played-out. In this paper, the following techniques and methods were proposed and their performance and superiority were verified through testing: cross-over dual reception buffering technique, advance partition multi-reception buffering technique, and on-demand multi-reception buffering technique, which are designed for effective picking up of information in media content being transmitted in short amount of time using RTSP when a user searches for media, as well as for reduction in playback delay; and same-priority packetization transmission method and priority-based packetization transmission method, which are media data packetization methods for transmission. From the simulation of functional evaluation, we could find that the proposed multiple receiving buffering and packetizing methods are superior, with respect to the media retrieval inclination, to the existing single receiving buffering method by 6-9 points from the viewpoint of effectiveness and excellence. Among them, especially, on-demand multiple receiving buffering technology with same-priority packetization transmission method is able to manage the media search inclination promptly to the requests of users by showing superiority of 3-24 points above compared to other combination methods. In addition, users could find the information they want much quickly since large amount of informations are received in a focused media retrieval period within a short time.

• The KIPS Transactions:PartC
• /
• v.15C no.5
• /
• pp.399-408
• /
• 2008

Mobile WiMAX provides wireless broadband services for data communication based on IP protocol. The limitation of physical bandwidth in the radio links may cause performance degradation in providing wireless broadband services in WIMAX. To enhance the efficiency of the radio link utilization, Payload Header Suppression (PHS) is defined as an optional header compression mechanism for mobile WiMAX. It has, however, a very limited compression capability since it has very restrictive compression fields. In this paper, hence, we assumed the application of Robust Header Compression (ROHC), a header compression scheme proposed for links characterized by high bit error ratios, long round-trip times (RTT), and scarce resource, to Mobile WiMAX, and studied its performance. Previous studies on ROHC performance merely focused on the impact of high bit error rate. However, bit error is virtually transparent to ROHC in the wireless systems like WiMAX, since the MAC provides the bit error checking function. In order to evaluate the performance of ROHC in the Mobile WiMAX environments, therefore, we evaluated the performance of ROHC with respect to the packet losses instead of bit error. We investigated the impact of the ROHC parameters that are recommended for the implementation in the ROHC and compared the performance of ROHC with PHS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.387-393
• /
• 2013

In shipyard site, a ship is constructed by integrating lots of modules that are made in several sites with different capabilities and specifications. Recently, it needs to make a shipyard to be smart with wired and wireless broadband networks between hierarchical shipyards. In this paper, we propose an installation of LTE femtocell local gateway at a remote shipyard, an information exchange method between hierarchical shipyards, and an offload method to separate the general traffic. We define the mode change in a femtocell gateway for supporting the offload of the general traffic between the headquarter and a remote shipyard, the offload data management and trigger message, and cache entry fields. To show the operation of our proposed off-loading function, we consider the transcipient message flow at the femtocell gateway with its state transition diagram. Hence, it is expected to increase the productivity of shipyard industry with mobile communications and broadband Internet technologies.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.713-716
• /
• 2007

This paper suggests One-time Password key exchange authentication technique for a strong authentication based on Ad-hoc Networks and through identify wireless environment security vulnerabilities, analyzes current authentication techniques. The suggested authentication technique consists of 3 steps: Routing, Registration, and Running. The Routing step sets a safe route using AODV protocol. The Registration and Running step apply the One-time password S/key and the DH-EKE based on the password, for source node authentication. In setting the Session key for safe packet transmission and data encryption, the suggested authentication technique encrypts message as H(pwd) verifiers, performs key exchange and utilizes One time password for the password possession verification and the efficiency enhancement. EKE sets end to end session key using the DH-EKE in which it expounds the identifier to hash function with the modula exponent. A safe session key exchange is possible through encryption of the H(pwd) verifier.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.193-204
• /
• 2012

This paper specifies a low-cost global mobility management architecture and protocol procedure called LC-$GM^2$, which is based on Proxy Mobile IPv6. In LC-$GM^2$, mobility management is performed by the network entity. The benefit is the elimination of the wireless link data delivery tunnel overhead between a mobile node and the access router. To compare with the well-known Hierarchical Mobile IPv6 mobility management protocol and GPMIP, the location update, packet delivery, and total cost functions generated by a mobile node during its average domain residence time are formulated for each protocol based on Fluid-flow mobility model. Then, the impacts of various system parameters on the cost functions are analyzed. The analytical results indicate that the proposed global mobility management protocol can guarantee lower total costs.

• Journal of Internet Computing and Services
• /
• v.5 no.2
• /
• pp.75-84
• /
• 2004

Geocasting, a variant of the conventional multicasting problem, is one of communication type in which the data packets are delivered to a group of all nodes within a specified geographical region (i.e., the geocasting region) and is called location-based multicasting(LBM)(l). An Ad-hoc network is a dynamically reconfigurable and temporary wireless network where all mobile devices using batteries as energy resources cooperatively maintain network connectivity without central administration or the assistance of base stations. Consequently, the technique to efficiently consume the limited amounts of energy resources is an important problem so that the system lifetime is maximized. In this paper, we propose a LBPA(Location-Based Power Aware) geocasting algorithm that selects energy-aware neighbor to route a packet towards the target region In Ad-hoc network environments. The method Is such that the energy consumption is balanced among the nodes in proportion to their energy reserves. Through the simulations, the proposed LBPA algorithm shows better results, that is, as good as 40% on the average over the conventional LBM algorithm in terms of the network lifetime.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1152-1160
• /
• 2004

OFDM technique was adopted as the standard of IEEE 802.1 la and it has been widely used for wireless LAN, European DVB/DAB system, Korean DMB system. In the standard of IEEE 802.11a the data packet is composed of two parts, preamble and data. Preamble is composed of short pilots and long pilots, which are used for synchronization and estimation of frequency offset and channel. We can also compensate phase noise effect in the transceiver by using above pilots. The phase noise is more complicate than frequency offset and seriously affects system performance. In this paper, we newly propose CPE and ICI simultaneous compensation method to compensate phase noise generated by transceiver oscillator and compare with previous studies. As results, phase noise effect can be significantly compensated by CPE cancellation method, PNS algorithm and our proposed CPE and ICI compensation method. Especially, the proposed CPE and ICI compensation method can achieve the best BER performance compared with original OFDM, CPE cancellation method and PNS algorithm.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.611-625
• /
• 2018

With innovative advances in wireless communication technology, many researches for extending network lifetime in maximum by using energy harvesting have been actively performed on the area of network resource optimization, QoS-guaranteed transmission, energy-intelligent routing and etc. As known well, it is very hard to guarantee end-to-end network delay due to uncertainty of the amount of harvested energy in multi-hop RF(radio frequency) energy harvesting wireless networks. To minimize end-to-end delay in multi-hop RF energy harvesting networks, this paper proposes an energy efficient routing metric based on interference aware and protocol which takes account of various delays caused by co-channel interference, energy harvesting time and queuing in a relay node. The proposed method maximizes end-to-end throughput by performing avoidance of packet congestion causing load unbalance, reduction of waiting time due to exhaustion of energy and restraint of delay time from co-channel interference. Finally simulation results using ns-3 simulator show that the proposed method outperforms existing methods in respect of throughput, end-to-end delay and energy consumption.