• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.514-535
• /
• 2019

Information-centric networks operate under the assumption that all network components have built-in caching capabilities. Integrating the caching strategies of information centric networking (ICN) with wireless virtualization improves the gain of virtual infrastructure content caching. In this paper, we propose a framework for software-defined information centric virtualized wireless device-to-device (D2D) networks. Enabling D2D communications in virtualized ICN increases the spectral efficiency due to reuse and proximity gains while the software-defined network (SDN) as a platform also simplifies the computational overhead. In this framework, we propose a joint virtual resource and cache allocation solution for latency-sensitive applications in the next-generation cellular networks. As the formulated problem is NP-hard, we design low-complexity heuristic algorithms which are intuitive and efficient. In our proposed framework, different services can share a pool of infrastructure items. We evaluate our proposed framework and algorithm through extensive simulations. The results demonstrate significant improvements in terms of visiting latency, end user QoE, InP resource utilization and MVNO utility gain.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.64-65
• /
• 2011

The ac power conversion inverter provides the ac power to ECR device for wireless power transfer. In this paper, the operating efficiency of the class-${\Phi}_2$ resonant inverter has been studied through by experiment for optimal design. Its switching frequency is 1MH and the input voltage is 96V which is the output voltage of LLC resonant converter. And its output voltage is 230Vp-p. The efficiency is measured up to 84%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.221-226
• /
• 2008

A new two dimensional (2-D) analytical model for the Threshold Voltage on dual material surrounding gate (DMSG) MOSFETs is presented in this paper. The parabolic approximation technique is used to solve the 2-D Poisson equation with suitable boundary conditions. The simple and accurate analytical expression for the threshold voltage and sub-threshold swing is derived. It is seen that short channel effects (SCEs) in this structure is suppressed because of the perceivable step in the surface potential which screens the drain potential. We demonstrate that the proposed model exhibits significantly reduced SCEs, thus make it a more reliable device configuration for high speed wireless communication than the conventional single material surrounding gate (SMSG) MOSFETs.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.342-345
• /
• 2014

An active frequency doubler monolithic microwave integrated circuit (MMIC) for E-band transceiver applications is presented in this letter. This MMIC has been fabricated in a commercial $0.1-{\mu}m$ GaAs pseudomorphic high electron mobility transistor (pHEMT) process on a 2-mil thick substrate wafer. The fabricated MMIC chip has been measured to have a high output power performance of over 13 dBm with a high fundamental leakage suppression of more than 38 dBc in the frequency range of 71 to 86 GHz under an input signal condition of 10 dBm. A microstrip coupled line is used at the output circuit of the doubler section to implement impedance matching and simultaneously enhance the fundamental leakage suppression. The fabricated chip is has a size of $2.5mm{\times}1.2mm$.

• 한국경영과학회지
• /
• 제41권2호
• /
• pp.53-65
• /
• 2016

Static wireless multi-hop networks, such as wireless mesh networks and wireless sensor networks have proliferated in recent years because of they are easy to deploy and have low installation cost. Two key measures are used to evaluate the performance of a multicast tree algorithm or protocol : end-to-end delay and the number of transmissions. End-to-end delay is the most important measure in terms of QoS because it affects the total throughput in wireless networks. Delay is similar to the hop count or path length from the source to each destination and is directly related to packet success ratio. In wireless networks, each node uses the air medium to transmit data, and thus, bandwidth consumption is related to the number of transmission nodes. A network has many transmitting nodes, which will cause many collisions and queues because of congestion. In this paper, we optimize two metrics through a guaranteed delay scheme. We provide an integer linear programming formulation to minimize the number of transmissions with a guaranteed hop count and preprocessing to solve the aforementioned problem. We extend this scheme not only with the guaranteed minimum hop count, but also with one or more guaranteed delay bounds to compromise two key metrics. We also provide an explanation of the proposed heuristic algorithm and show its performance and results.

• The Journal of the Acoustical Society of Korea
• /
• 제28권2E호
• /
• pp.35-42
• /
• 2009

In this paper, we present criteria of objective measurement of speech quality to provide the mobile-VoIP services efficiently over wireless mobile internet. The mobile-VoIP service, which is based on mobility and is error-prone compared to conventional VoIP over wired network, is about to be launched, but there have not been adequate quality indexes and the Quality of Service (QoS) standards for evaluating speech quality of Mobile-VoIP. In addition, there are many factors influencing on the speech quality in packet network of which packet loss contribute directly to the overall voice communication quality. For this reason, we adopt the Gilbert-Elliot Channel Model for modeling packet network based on IP and assess the voice quality through the objective speech method of ITU-T P. 862 PESQ and ITU-T P. 862.1 MOS-LQO under various packet loss rates in the transmission channel environments. Our simulation results address the specific criteria and QoS for the mobile-VoIP services in terms of the various packet loss environments.

• 디지털융복합연구
• /
• 제13권5호
• /
• pp.213-218
• /
• 2015

최근 정보통신 기술의 발전과 함께 M2M(Machine-to-Machine) 산업분야의 시스템이 다기능 고성능화 되고 있으며 IoT(Internet of Things), IoE(Internet of Everything)기술 등과 함께 많은 발전해가고 있다. 통신상 보안적인 서비스를 제공하기 위해서는 인증, 기밀성, 익명성, 부인방지, 데이터신뢰성, 비연결성, 추적성 등이 충족 되어야 한다. 그러나 통신방식이 무선 전송구간에서는 공격자의 공격에 노출되어 있다. M2M 무선통신 프로토콜에서 보안상 문제가 생기면 시스템오류, 정보유출, 프라이버시문제 등의 심각한 상황이 발생할 수 있다. 따라서 프로토콜 설계는 상호인증과 보안이 필수적인 요소이며, 최근 보안통신프로토콜에 대한 분야가 매우 중요한 부분으로 연구되고 있다. 본 논문에서는 안전한 통신프로토콜을 위해 해시함수, 난수, 비밀키 및 세션키를 적용하여 설계하였다. 제안 프로토콜이 공격자의 각종공격에 안전함을 증명하기 위해 프로토콜 정형검증도구인 Casper/FDR 도구를 이용하여 실험하였다. 실험결과 제안프로토콜은 안전성을 충족했으며 문제없이 종료됨을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권4호
• /
• pp.286-292
• /
• 2006

This paper presents the design of a low-voltage wide-band switched-capacitor (SC) filter for wireless communication receiver applications. The filter is the 5th-order Elliptic lowpass filter. With the clock frequency of 50MHz implying that an effective sampling frequency is 100MHz with double sampling scheme, the cut-off frequency of the filter is programmable to be 1.25MHz, 2.5MHz, 5MHz and 10MHz. For low-power systems powered by a single-cell battery, the SC filter was elaborately designed to operate at 1.2V power supply. Simulation result shows that the 3rd-order input intercept point (IIP3) can be up to 27dBm. The filter was fabricated in a $0.25-{\mu}m$ 1P5M standard CMOS technology and measured frequency responses show good agreement with the simulation ones. The current consumption is 34mA at a 1.2V power supply.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3917-3922
• /
• 2010

본 논문은 U-band(40~60 GHz)대역에 최적화된 epitaxial로 pHEMT(Pseudomorphic High Electron Mobility Transistor)을 제작, 대신호 모델링하여 특성분석 및 60 GHz 대역의 3단 증폭기를 MMIC(Monolithic Microwave Integrated Circuit)로 설계 제작하였다. 본 논문에 사용된 pHEMT는 $0.12\;{\mu}m$의 게이트 길이와 총 게이트 면적 $100\;{\mu}m$, $200\;{\mu}m$를 사용하여 대신호 모델링하였으며 설계시 안정도의 향상을 위하여 부궤환회로와 함께 MIM(Metal-Insulator-Metal) 커패시터 대신 MCLF(Microstriop Coupled Line Filter)를 사용하여 안정도를 향상시켰다. 제작결과 크기가 $2.5{\times}1.5mm^2$이고 소모된 전류는 약 40 mA, 동작주파수 59.5 ~ 60.5 GHz에서 이득 19.9 dB ~ 18.6 dB, 입력정합특성 -14.6 dB ~-14.7 dB, 출력정합 특성 -11.9 dB ~-16.3 dB와 출력 -5 dBm의 특성을 얻었다.

• 대한인간공학회지
• /
• 제34권2호
• /
• pp.85-101
• /
• 2015

Objective: The purpose of this study was to develop and evaluate smart secondary controls using iPad for the drivers with physical disabilities in the driving simulator. Background: The physically disabled drivers face problems in the operation of secondary control devices that accept a control input from a driver for the purpose of operating the subsystems of a motor vehicle. Many of conventional secondary controls consist of small knobs or switches that physically disabled drivers have difficulties in grasping, pulling or twisting. Therefore, their use while driving might increase distraction and workload because of longer operation time. Method: We examined the operation time of conventional and smart secondary controls, such as hazard warning, turn signal, window, windshield wiper, headlights, automatic transmission and horn. The hardware of smart secondary control system was composed of iPad, wireless router, digital input/output module and relay switch. We used the STISim Drive3 software for driving test, customized Labview and Xcode programs for interface control of smart secondary system. Nine subjects were involved in the study for measuring operation time of secondary controls. Results: When the driver was in the stationary condition, the average operation time of smart secondary devices decreased 32.5% in the normal subjects (p <0.01), 47.4% in the subjects with left hemiplegic disabilities (p <0.01) and 38.8% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. When the driver was driving for the test in the simulator, the average operation time of smart secondary devices decreased 36.1% in the normal subjects (p <0.01), 41.7% in the subjects with left hemiplegic disabilities (p <0.01) and 34.1% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. Conclusion: The smart secondary devices using iPad for people with hemiplegic disabilities showed significant reduction of operation time compared with conventional secondary controls. Application: This study can be used to design secondary controls for adaptive vehicles and to improve the quality of life of the people with disabilities.