• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.37-42
• /
• 2012

LED is just a semiconductor which can produce light. Currently, there are active research works on LED lighting technologies according to the growth of energy-saving environmental industry. Especially, LED communication is one of the active research works in these fields. In this paper, we design a LED communication-based multi-hop transmission wireless network system. The designed system consists of a transmission circuit system(transmitter) using LED and a receiving circuit system(receiver) using PD(photo detector) and OP-Amp, and relay system which can support multi-hop wireless network service with PD, OP-Amp, and LED, respectively. The experiments for the designed system are performed as follows. One computer is connected at the end of transmitter and receiver, respectively. There are two relays between transmitter and receiver, and text files are transmitted continuously by using text transmission programming. In this experiment, we test the performance with various baud rates, transmission ranges.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.609-610
• /
• 2017

Cognitive radio communication techniques have been attracting attention to efficiently use the scarce spectrum as the wireless communication service increases. In cognitive radio communication, efforts to minimize interference to the primary user are important technical factors. In a multi-hop wireless ad hoc network, multi-hop transmission requires path and channel selection considering channel interference as well as collision with primary users. In the multi-channel environment, cognitive radio network has different capacities depending on the inter-channel interference and collision with the main users. In this paper, we propose a multi-hop transmission scheme that minimizes inter-channel interference and reduce collision with primary users.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.3
• /
• pp.138-144
• /
• 2007

Wireless Sensor Network(WSN) consists of a lot of light-weight sensor nodes with the capability of wireless communication. Studies have been done to improve stability and fault-tolerancy of WSN because the sensor nodes are basically vulnerable to the harsh environment. Specially, the time synchronization among sensor nodes becomes a challenging issue in WSN. All the local times should always keep the same with each other in the sensor field to perform data aggregation and energy-aware communication in WSN. In this paper, a new time synchronization technique is proposed to operate efficiently irrespective of the number of sensor nodes and the number of hops needed to cover all sensor nodes for synchronization. Simulation results show that the proposed technique has the lowest amount of packet traffic among the several time synchronization techniques.

• International Journal of Contents
• /
• v.8 no.2
• /
• pp.13-18
• /
• 2012

In wireless sensor networks, an energy efficient data gathering scheme is one of core technologies to process a query. The cluster-based data gathering methods minimize the energy consumption of sensor nodes by maximizing the efficiency of data aggregation. However, since the existing clustering methods consider only uniform network environments, they are not suitable for the real world applications that sensor nodes can be distributed unevenly. To solve such a problem, we propose a balanced multi-hop clustering scheme in non-uniform wireless sensor networks. The proposed scheme constructs a cluster based on the logical distance to the cluster head using a min-distance hop count. To show the superiority of our proposed scheme, we compare it with the existing clustering schemes in sensor networks. Our experimental results show that our proposed scheme prolongs about 48% lifetime over the existing methods on average.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2499-2522
• /
• 2017

Multi-hop networks are a low-setup-cost solution for enlarging an area of network coverage through multi-hop routing. Carrier sense multiple access with collision avoidance (CSMA/CA) is frequently used in multi-hop networks. Multi-hop networks face multiple problems, such as a rise in contention for the medium, and packet loss under heavy-load, saturated conditions, which consumes more bandwidth due to re-transmissions. The number of re-transmissions carried out in a multi-hop network plays a major role in the achievable quality of service (QoS). This paper presents a statistical, analytical model for the end-to-end delay of contention-based medium access control (MAC) strategies. These strategies schedule a packet before performing the back-off contention for both differentiated heterogeneous data and homogeneous data under saturation conditions. The analytical model is an application of Markov chain theory and queuing theory. The M/M/1 model is used to derive access queue waiting times, and an absorbing Markov chain is used to determine the expected number of re-transmissions in a multi-hop scenario. This is then used to calculate the expected end-to-end delay. The prediction by the proposed model is compared to the simulation results, and shows close correlation for the different test cases with different arrival rates.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.142-147
• /
• 2008

In wireless sensor networks, one of the most important issue is improvement of network lifetime with an efficient energy consumption. we repose effective multi-hop routing algorithm which increases the number of nodes alive at any time. In our algorithm we use the dynamic selection of cluster head and short distance transmission method. We simulated the proposed algorithm by using Network Simulator 2 and compared its performance with LEACH. The experimental result shows that the number of the nodes alive is increased up to 39.71[%] during the simulation time.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.19-24
• /
• 2012

In this paper, we analyze the maximum throughput of opportunistic routing along a long-haul multi-hop wireless network path for a single data stream, while considering link-level interference among the network nodes. Surprisingly, we find out that opportunistic routing does not provide much improvement in throughput for long-haul paths. The results of this research show that when we compare the extra cost for the complex implementation of the opportunistic routing scheme to the performance improvement obtained from it, opportunistic routing scheme needs to be applied to only short-haul multi-hop wireless network paths.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.323-328
• /
• 2007

Communication systems beyond 3G should provide more than 100 Mbps for wireless access. In addition to smart antennas, wireless multi-hop networks are proposed to increase the cell size and throughput. For example, Zigbee technology is expected to provide low cost and low power connectivity and can be implemented in wireless mesh networks larger than is possible with Bluetooth. Also, home embedded system using wireless mesh network is one of the key market areas for Zigbee applications. If the line-of-sight path is shadowed by home obstacles, a direct connection between the access point (AP) and the node is not possible at high frequencies. Therefore, by using multi-hop relay scheme the end node can be reached to AP. In this paper, the relaying of data between the AP and the end node is investigated and the throughput and PER(Packet Error Rate) are evaluated in multi-hop wireless mesh networks by using DSSS/BPSK system.

• Journal of IKEEE
• /
• v.13 no.1
• /
• pp.94-100
• /
• 2009

In recent years, the wireless mesh network (WMN) has been an emerging technology to provide Internet access to fixed and mobile wireless devices. The main goal of this paper is the design and simulation of a new MAC protocol based on the multi-path routing information for wireless mesh networks. The information about multiple paths discovered in the network layer is exploited by the MAC layer in order to forward a frame over the best hop out of multiple hop choices. The performance of our approach is compared with conventional 802.11 MAC through the simulation. The results show that our scheme exhibits a significantly better performance rather than conventional 802.11 MAC protocol in terms of packet overhead, end-to-end throughput and delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.723-733
• /
• 2012

In wireless ad hoc networks, packet loss and latency are frequently occurred by movement of node. As the number of transmission hops increases in these networks, the throughput is increasingly deteriorated. In this paper, we design the wireless ad hoc network system based on IEEE 802.16j MMR (Mobile Multi-hop Relay), which improves the network performance. Our wireless ad hoc network system used adaptively the nearest BS and Farthest BS scheduling algorithms for efficient data transmission and chose the optimal path that minimize data loss and latency. In order to evaluate performance of the wireless ad hoc network system based on IEEE 802.16j MMR, we used the LWX (Light Wimax) model of NS-2 simulator. Through the simulation, we analyzed the network performance for various scenarios.