• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.906-912
• /
• 2006

In this paper, N-shaped slot antenna for $5.15GHz{\sim}5.35GHz$ is designed, fabricated, and measured. The prototype consist of meander corrugated N-shaped slot. To obtain suitable bandwidth, the form layer is inserted between ground plane and substrate. Important parameters in the design are N-slot length, width, position, air-gap height, and feed point position. From these parameters optimized, a four N-shaped slot antenna is fabricated and measured. The measured results of the antenna are obtained as follows results. The resonant frequency of the fabrication N-shaped slot antenna is 5.25GHz bandwidth for approximately 300MHz(VSWR<2.0) and the gain is $1.3{\sim}2.64dBi$. The experimental far-field patterns are stable across the pass band. The 3dB bandwidth in H-Plane and E-Plane are $80.21^{\circ}\;and\;103.38^{\circ}$, respectively.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.6
• /
• pp.388-396
• /
• 2007

In this paper, a ubiquitous parking management system(UPMS) using sensor network is proposed. Ubiquitous parking management system provides information on free space in the parking lot through PDA or cellular phone connected to wireless LAN. For the implementation of UPMS, we have developed sensor node, sensor application and web server application. The proposed system periodically updates parking space data and monitors in real-time according to the user's request from the personal internet device. Collected parking data are stored onto the database for further analysis. The implemented UPMS system was installed on campus parking lot using 10 sensor nodes and we successfully demonstrated its feasibility by accessing the web server from out of the campus.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.1
• /
• pp.60-67
• /
• 2014

In this study, an automated cable non-destructive testing(NDT) system was developed to monitor the steel cables that are a core component of cable-stayed bridges. The magnetic flux leakage(MFL) method, which is suitable for ferromagnetic continuum structures and has been verified in previous studies, was applied to the cable inspection. A multi-channel MFL sensor head was fabricated using hall sensors and permanent magnets. A wheel-based cable climbing robot was fabricated to improve the accessibility to the cables, and operating software was developed to monitor the MFL-based NDT research and control the climbing robot. Remote data transmission and robot control were realized by applying wireless LAN communication. Finally, the developed element techniques were integrated into an MFL-based cable NDT system, and the field applicability of this system was verified through a field test at Seohae Bridge, which is a typical cable-stayed bridge currently in operation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.357-365
• /
• 2009

RTLS(Real-Time location system) for Location tracking of personnel and equipment of a construction site is now in development, among these techniques the wireless LAN-based techniques are being considered. To introduce these techniques to the construction site, the 3-dimensional visibility analysis prior to the installation location of AP must be simulated. At this time, three-dimensional visibility analysis considering the propagation distance of RTLS signal of AP(Access Point) should be performed. In this research, two processing methods LOS boundary are tested to various grid size of gridded terrestrial LiDAR data, and the results were compared. In evaluations of visible area, the Scanline Fill-Method shows approximately 7.4% more visible area than the Shadow Clipping-Method, but the Shadow Clipping-Method shows stable results for the grid size. About the processing time, the Scanline Fill-Method is about 2 times faster compared to the Shadow Clipping-Method.

• Journal of KIISE:Information Networking
• /
• v.32 no.6
• /
• pp.723-731
• /
• 2005

Wide spread deployment of infrastructure WLANs has made Wi Fi an integral part of today's Internet access technology. Despite its crucial role in affecting end to end performance, past research has focused on MAC protocol enhancement, analysis and simulation based performance evaluation without sufficient consideration for modeling inaccuracies stemming from inter layer dependencies, including physical layer diversity, that significantly impact performance. We take a fresh look at IEEE 802.11 WLANs, and using experiment, simulation, and analysis demonstrate its surprisingly agile performance traits. Contention based MAC throughput degrades gracefully under congested conditions, enabled by physical layer channel diversity that reduces the effective level of MAC contention. In contrast, fairness and jitter significantly degrade at a critical offered load. This duality obviates the need for link layer flow control for throughput improvement but necessitates traffic control for fairness and QoS. We use experimentation and simulation in a complementary fashion, pointing out performance characteristics where they agree and differ.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.696-706
• /
• 2008

In this paper we show the performance of the network-adaptive high-definition scalable video streaming using QWLAN board with IEEE 802.11e MAC monitoring and control. Realtime collected MAC parameters are used to determine which video data is extracted for the predicted available bandwidth. To achieve performance, extraction through R-D is proposed instead of the standard video packet extraction. It is shown through experiments that streaming video quality can be enhanced by fast adaptation to network conditions by using the proposed method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.2
• /
• pp.1-11
• /
• 2011

A lot of works on the throughput analysis of the IEEE 802.11 DCF have been studied since last few years. However, we should predict the throughput of the IEEE 802.11g that we mostly use today because the existing numerical results do not consider exactly the IEEE 802.11g with the physical layer ERP-OFDM parameters. In particular, we might have different results in the working WLAN s compared with the simple predictions of the throughput using the previous results. In this paper, we directly monitor the ERP-OFDM physical layer parameters on the operating WLANs, and then analyze the saturated DCF throughput with the well-known analytic model. Moreover, we measure the bandwidth utilization on the real WLANs working with FTP services, and then compare them with the analytic results. According to the experiment results, we confirm the usefulness of the analytic models which assume the saturated traffic sources.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7B
• /
• pp.706-718
• /
• 2002

In bluetooth system, there are two kinds of interference. One is the frequency static interference, for example 802.11 direct sequence, the interferer uses fixed frequency band. Another is frequency dynamic interference, for example other piconets or 802.11 frequency hopping, the interferer uses dynamic frequency channel and cant be estimated. In this paper we introduce a novel solution of hybrid method of Listen-Before-Talk (LBT) and Adaptive Frequency Hopping (AFH) to address the coexistence of bluetooth and Direct Sequence of wireless local area network (WLAN). Before any bluetooth packet transmission, in the turn around time of the current slot, both the sender and receiver sense the channel whether there is any transmission going on or not. If the channel is busy, packet transmission is withdrawn until another chance. This is the LBT in Bluetooth. Because of asymmetry sense ability of WLAN and bluetooth, AFH is introduced to combat the left front-edge packet collisions. In monitor period of AFH, LBT is performed to label the channels with static interference. Then, all the labeled noisy channels are not used in the followed bluetooth frequency hopping. In this way, both the frequency dynamic and frequency static interference are effectively mitigated. We evaluate the solution through packet collision analysis and a detail realistic simulation with IP traffic. It turns out that the hybrid method can combat both the frequency dynamic and frequency static interference. The packet collision analysis shows it almost doubles the maximal system aggregate throughput. The realistic simulation shows it has the least packet loss.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.99-107
• /
• 2012

We propose control mechanism of UAV(Unmanned Aerial Vehicle) group for making the communication network to the base station after the target is found. We assume UAVs can communicate to each other by wireless LAN without existing communication infrastructure. UAVs started to fly in linear formation, after finding target, UAVs move to the base station to send the information about the target. At least one UAV stays the position that the target is found. This paper explains the mechanism supporting reliable connectivity during UAV group's flying. We verify the proposed scheme and evaluate the performance through NS-2 simulation. The proposed scheme can be applied to the disaster area and war zone, which the existing communication infrastructure cannot be worked.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.308-316
• /
• 2004

As we know that there are so many restrictions controlling the autonomous robot to turn and move in an indoor space. In this research, Ive adopted the concept ‘Omni-directional wheel’ as a driving equipment, which makes it possible for the robot to move in horizontal and diagonal directions. Most of all, we eliminated the slip error problem, which can occur when the system generates power by means of slip. In order to solve this problem, we developed a ‘slip error correction algorithm’. Following this program, whenever the robot moves in any directions, it defines its course by comparing pre-programmed direction and the current moving way, which can be decided by extracted image of floor line. Additionally, this robot also provides the limited security and service function. It detects the motion of vehicle, transmits pictures to multiple users and can be moved by simple order's. In this paper, we tried to propose a practical model which can be used in an office.