• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.234-236
• /
• 2014

본 논문은 기존의 T-DMB(Terrestrial Digital Multimedia Broadcasting) 재난 정보 신호를 Wi-Fi(Wireless Fidelity)를 이용하여 재전송하는 기법을 제시한다. 각종 재난이 발생하는 지역의 T-DMB 난시청 구간에 대해서 Wi-Fi 를 이용하여 재난 정보 신호를 재전송함으로써 재난 정보 신호를 받지 못하는 시청자에게 신속한 재난 정보 서비스를 가능하게 해준다. 재난이 발생한 지역에서 T-DMB 재난 정보를 수신할 수 없는 시청자에게 AP(Access Point)를 이용하여 재난 정보를 재전송하는 것이 목적이다. 이에 본 논문에서 제안하는 Wi-Fi 를 이용한 재전송 기법은 T-DMB 신호를 수신하지 못한 시청자에게 재난정보를 효율적으로 재전송함으로써 해당 지역에 더 높은 재난 정보 수신률을 제공할 뿐만 아니라 국민의 생명과 안전을 도모할 수 있다.

• Journal of Information Processing Systems
• /
• v.7 no.1
• /
• pp.43-52
• /
• 2011

Whether it is crosstalk, harmonics, or in-band operation of wireless technologies, interference between a reference system and a host of offenders is virtually unavoidable. In past contributions, a benchmark has been established and considered for coexistence analysis with a number of technologies including FWA, UMTS, and WiMAX. However, the previously presented model does not take into account the mobility factor of the reference node in addition to a number of interdependent requirements regarding the link direction, channel state, data rate and system factors; hence limiting its applicability for the MBWA (IEEE 802.20) standard. Thus, over diverse modes, in this correspondence we analytically derived the greatest aggregate interference level tolerated for high-fidelity transmission tailored specifically for the MBWA standard. Our results, in the form of benchmark indicators, should be of particular interest to peers analyzing and researching RF coexistence scenarios with this new protocol.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.205-208
• /
• 2003

In this paper, we realized radio controller with Convolution code and CRC code to solve the wired and wireless controller's problem that is present industry spot. We used microprocessor as a controller, and analyzed testing data with and without Convolution code. Convolution code of constraint length k=3, symbols rate 1/2 dramatically improves the radio controller's fidelity, and the number of CRC bit is 16bit(2byte) and the polynomial of /Χ$^{15}$ ＋Χ$^{2}$＋1 is used.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.101-106
• /
• 2014

As ESL(Electronic Shelf Label) system is increased at the market in the world, the interference between ESL system and Wi-Fi(Wireless Fidelity) Cellular Phone at 2.4GHz becomes issue. The interference scenario and propagation of the Extended HATA Model were established to analyze the interference from Wi-Fi Cellular Phone into ESL system. Through simulation results based on SEAMCAT(Spectrum Engineering Advanced Monte Carlo Analysis Tool), separation distance was obtained to protect ESL system from Wi-Fi Cellular Phone interference.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.127-128
• /
• 2020

본 논문에서는 무선 통신(Wi-Fi)과 FireBase를 활용해 화재 발생을 알려 다수의 사람들이 대피 할 수 있는 시스템이다. 이 시스템은 아두이노를 기반으로 가스·불꽃·온도센서로 화재를 감지하고, 화재를 감지하면 무선 통신을 이용해 서버와 파이어 베이스로 전송한다. 서버로 전송된 데이터는 사용자들에게 어플리케이션의 푸시 기능으로 화재 발생 알림을 전송하고, 파이어 베이스로 전송된 데이터는 어플리케이션에서 대피경로를 알려주어 신속한 대피를 할 수 있게 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.255-258
• /
• 2011

Wi-Fi is a rapidly spreading communications network with Smart phone's publication, the technology has become Ubiquitous-based core network which is connected to personal computers, laptops, and tablet PC. Wi-Fi can send currently a variety of data standard due to developed wireless LAN communications network. One of Wi-Fi standard protocols, which is IEEE 802.11n, use 2.4GHz and 5GHz band. 2.4GHz band is used for 802.11b/g protocol because wavelength is long, diffraction and receiving distance is enough to connect other device. 5GHz band has more available channels to use than 2.4GHz band, so there is no frequency interference of other wireless device such as Bluetooth, RFID. Moreover, there is low interference between channels due to small users in each bandwidth level. In the thesis, we are going to analyze 802.11a/b/g protocol which has used since the beginning of Wi-Fi protocol and 802.11n protocol which is used lately. Furthermore, we look into development and direction for standardization of the next generation wireless LANs which are 802.11ac and 802.11ad. In addition, we will consider for the security, vulnerabilities and its countermeasure in Wireless LAN.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.1-9
• /
• 2016

Railroad bridges account for 25% of the entire high-speed rail network. Railway bridges are subject to gradual structural degradation or fatigue accumulation due to consistent and repeating excitation by fast moving trains. Wireless sensing technology has opened up a new avenue for bridge health monitoring owing to its low-cost, high fidelity, and multiple sensing capability. On the other hand, measuring the transient response during train passage is quite challenging that the current wireless sensor system cannot be applied due to the intrinsic time delay of the sensor network. Therefore, this paper presents a framework for monitoring such transient responses with wireless sensing systems using 1) real-time excessive vibration monitoring through ultra-low-power MEMS accelerometers, and 2) post-event time synchronization scheme. The ultra-low power accelerometer continuously monitors the vibration and trigger network when excessive vibrations are detected. The entire network of wireless smart sensors starts sensing through triggering and the post-event time synchronization is conducted to compensate for the time error on the measured responses. The results of this study highlight the potential of detecting the impact load and triggering the entire network, as well as the effectiveness of the post-event time synchronized scheme for compensating for the time error. A numerical and experimental study was carried out to validate the proposed sensing hardware and time synchronization method.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.525-534
• /
• 2005

This paper is concerned with the query slipping and its prevention for trajectory-based matchmaking service in wireless sensor networks. The problem happens when a query propagating along a subscribe trajectory moves through a publish trajectory without obtaining desired information, even though two trajectories intersect geometrically. There follows resubmission of the query or initiation of another subscribe trajectory Thus, query slipping results in considerable time delay and in the worst, looping in the trajectory or query flooding the network. We address the problem formally and suggest a solution. First, the area where nodes are distributed is logically partitioned into smaller grids, and a grid-based multicast next-hop selection algorithm is proposed. Our algorithm not only attempts to make the trajectory straight but also considers the nodal density of recipient nodes and the seamless grid-by-grid multicast. We prove that the publishing and subscribing using the algorithm eventually eliminate the possibility of the slipping. It toms out that our algorithm dissipates significantly less power of neighbor nodes, compared to the non grid-based method, as greedy forwarding, and the fixed- sized grid approach, as GAF (Geographical Adaptive Fidelity)

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.423-438
• /
• 2010

Wireless smart sensors enable new approaches to improve structural health monitoring (SHM) practices through the use of distributed data processing. Such an approach is scalable to the large number of sensor nodes required for high-fidelity modal analysis and damage detection. While much of the technology associated with smart sensors has been available for nearly a decade, there have been limited numbers of fulls-cale implementations due to the lack of critical hardware and software elements. This research develops a flexible wireless smart sensor framework for full-scale, autonomous SHM that integrates the necessary software and hardware while addressing key implementation requirements. The Imote2 smart sensor platform is employed, providing the computation and communication resources that support demanding sensor network applications such as SHM of civil infrastructure. A multi-metric Imote2 sensor board with onboard signal processing specifically designed for SHM applications has been designed and validated. The framework software is based on a service-oriented architecture that is modular, reusable and extensible, thus allowing engineers to more readily realize the potential of smart sensor technology. Flexible network management software combines a sleep/wake cycle for enhanced power efficiency with threshold detection for triggering network wide operations such as synchronized sensing or decentralized modal analysis. The framework developed in this research has been validated on a full-scale a cable-stayed bridge in South Korea.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.143-150
• /
• 2023

Underwater wireless communication is a challenging issue for realizing the smart aqua-farm and various marine activities for exploring the ocean and environmental monitoring. In comparison to acoustic and radio frequency technologies, the visible light communication is the most promising method to transmit data with a higher speed in complex underwater environments. To send data at a speedier rate, high-performance photodetectors are essentially required to receive blue and/or cyan-blue light that are transmitted from the light sources in a light-fidelity (Li-Fi) system. Here, we fabricated high-performance organic phototransistors (OPTs) based on P-type donor polymer (PTO2) and N-type acceptor small molecule (IT-4F) blend semiconductors. Bulk-heterojunction (BHJ) PTO2:IT-4F photo-active layer has a broad absorption spectrum in the range of 450~550 nm wavelength. Solution-processed OPTs showed a high photo-responsivity >1,000 mA/W, a large photo-sensitivity >10³, a fast response time, and reproducible light-On/Off switching characteristics even under a weak incident light. BHJ organic semiconductors absorbed photons and generated excitons, and efficiently dissociated to electron and hole carriers at the donor-acceptor interface. Printed and flexible OPTs can be widely used as Li-Fi receivers and image sensors for underwater communication and underwater internet of things (UIoTs).