• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.605-610
• /
• 2021

Wireless charging method using a laser is considered as the most efficient method at a long distance of the wireless charging method. Combining long-range laser wireless charging technology with wireless communication technology will make it possible to use it for a variety of applications. Accordingly, this paper shows the results of research and experiments on wireless charging and wireless communication simultaneously based on a laser. This technique uses a laser as a light source for E/O(: Electric-to-Optical) conversion at the transmitter for optical wireless power transmission. In the experimental results, the optical power transmission using a 100 mW laser transmitter and a solar cells receiver showed a DC-to-DC efficiency of 1.9 %, wireless optical communication showed a transmission speed of up to 90 kbps when the transmission distance is 15 m.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.251-255
• /
• 2012

In recent years, according to improvement of various vehicle instruments, railway also has been developed in various fields. As a result, to transmit accurate information to each railway system, the efficient communication system is required. In railway communication system, mitigation of wireless fading is very important. So, in this paper we introduced the cooperative relay channel model and cooperative relay scheme. Also we analyzed and simulated the cooperative relay scheme which is suitable for railway communication systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.5
• /
• pp.998-1013
• /
• 2013

Wireless wearable sensor networks have emerged as a promising technique for human motion tracking due to the flexibility and scalability. In such system several wireless sensor nodes being attached to human limb construct a wearable sensor network, where each sensor node including MEMS sensors (such as 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope) monitors the limb orientation and transmits these information to the base station for reconstruction via low-power wireless communication technique. Due to the energy constraint, the high fidelity requirement for real time rendering of human motion and tiny operating system embedded in each sensor node adds more challenges for the system implementation. In this paper, we discuss such challenges and experiences in detail during the implementation of such system with wireless wearable sensor network which includes COTS wireless sensor nodes (Imote 2) and uses TinyOS 1.x in each sensor node. Since our system uses the COTS sensor nodes and popular tiny operating system, it might be helpful for further exploration in such field.

• The Journal of Society for e-Business Studies
• /
• v.13 no.2
• /
• pp.195-212
• /
• 2008

The demand of wireless communication system is increasing due to the development of computers and other digital media appliances. In particular, new wireless communication technology is necessary for implementation of home network since a lot of data transmission is occurred. Recently, two wireless communication technologies, Ultra Wide Band(UWB) and 60GHz band wireless communication technology, have being developed for high-speed data transmission and Wireless Personal Area Network(WPAN). In this paper, we study the present development condition of these two technologies and a role of them in home network. We also suggest the method to implement the home network using all wireless communication technologies. At the end, we outlook the market of WPAN and High Definition Multimedia Interface(HDMI).

• ETRI Journal
• /
• v.44 no.6
• /
• pp.915-924
• /
• 2022

In this paper, we present a two-stage scalable channel estimator (TSCE), a deep learning (DL)-based scalable, and robust channel estimator for wireless cellular networks, which is made up of two DL networks to efficiently support different resource allocation sizes and reference signal configurations. Both networks use the transformer, one of cutting-edge neural network architecture, as a backbone for accurate estimation. For computation-efficient global feature extractions, we propose using window and window averaging-based self-attentions. Our results show that TSCE learns wireless propagation channels correctly and outperforms both traditional estimators and baseline DL-based estimators. Additionally, scalability and robustness evaluations are performed, revealing that TSCE is more robust in various environments than the baseline DL-based estimators.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.1
• /
• pp.7-14
• /
• 2014

This paper deals with recent research cases and directions of Fly-By-Wireless (FBWLS) flight control technology. FBWLS is a new type of flight control system technology with the aim of solving the problems mainly caused by the increasing amount of wires in aircraft to which Fly-By-Wire (FBW) technology applies. Therefore, in FBWLS flight control system the wired communication system is replaced with a wireless communication system. Currently the FBWLS flight control technology is at an initial development stage and thus this paper surveys deals with the cases in the viewpoint of technology feasibility. In this context, this paper analyzes technology that needs further studies to secure the reliability, stability and accuracy to the similar level of the corresponding FBW system. Since the major problems of FBWLS technology are packet losses and time delays so that this paper suggests the research direction of wireless communication protocol selection, optimization of wireless communication network and controller design considered communication environment.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.4
• /
• pp.441-450
• /
• 2001

This dissertation deal with over-all wireless communication technology. And introduce wireless communication technology analytically that it use for Home-LAN communication technology (HomeRF, Bluetooth, IEEE 802.11, HIPERLAN, etc). Home-LAN communications issue by the terminal field of the latest high-speed network construction. This technologies possesses characteristics and significances as the representative technology using in Home-LAN communication technology. Also, the method of application is conditional on individually. Wireless LAN put Home-LAN communications to practical use. Bluetooth have practical use for an individual mobile communications with internet. HomeRF have a vision that the construction of wireless system in house purely. Therefore, this dissertation investigates merits and demerits between those technologies. And then leads the most compatible technology for application of Home-LAN. Finally, this thesis have a view of the development course hereafter.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3104-3110
• /
• 2011

This paper describes how to ensure safety of train by guaranteeing stable and continuous communication in RF-CBTC. CBTC System uses the wireless communication between onboard and wayside so that safety of wireless communication is the most important. Losing the position of train causes vital problem of train service. By losing the position of train, the other trains are blocked in the block and the train move by emergency mode so headway and safety cannot guaranteed. Therefore, safety is ensured by redundancy of wireless equipment. One of the ways to make redundancy is redundancy of equipment. However, the redundancy of equipment spends a lot of money to avoid interference in limited place like underground. Continuous communication is guaranteed by means of redundancy of wireless communication coverage to solve the problems even though one of the equipment is broken.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.152-152
• /
• 2004

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.2946-2962
• /
• 2017

An improved energy-efficient compressed network coding method is proposed for the data communication in the wireless sensor networks (WSNs). In the method, the compressed sensing and network coding are jointly used to improve the energy efficiency, and the two-hop neighbor information is employed to choose the next hop to further reduce the number of the transmissions. Moreover, a new packet format is designed to facilitate the intermediate node selection. To theoretically verify the efficiency of the proposed method, the expressions for the number of the transmissions and receptions are derived. Simulation results show that, the proposed method has higher energy efficiency compared with the available schemes, and it only requires a few packets to reconstruct measurements with reasonable quality.