• Journal of Magnetics
• /
• 제14권2호
• /
• pp.75-79
• /
• 2009

Nickel (Ni) and ferrite ($Fe_3O_4$, $NiFe_2O_4$) nanoparticles were synthesized by LGC using both wire feeding (WF) and micron powder feeding (MPF) systems. Phase evolution and magnetic properties were then investigated. The Ni nanopowder included magnetic-ordered phases. The LGC synthesis yielded spherical particles with large coercivity while the abnormal initial magnetization curve for Ni indicated a non-collinear magnetic structure between the core and surface layer of the particles. Since the XRD pattern cannot actually distinguish between magnetite ($Fe_3O_4$) and maghemite (${\gamma}-Fe_2O_3$) as they have a spinel type structure, the phase of the iron oxide in the samples was unveiled by $M{\ddot{o}}ssbauer$ spectroscopy. The synthesized Ni-ferrite consisted of single domain particles, including an unusual ionic state. The synthesized nanopowder bore an active surface due to the defects that affected abnormal magnetic properties.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.526-531
• /
• 2016

This paper presents an experimental study on the optimal settings for the selected DC fault relay (50F) to improve the operating performance for the high-speed circuit breaker on DC feeding system which ensure safety within rolling stock maintenance depot. In this study, current supplied to overhead contact wire was calculated on 1 ms interval to analyze the correction values of DC fault selective relay for the operation of current supply cutout. Particularly, standards for the accurate detection of accidents between an electric railway vehicle and the electric power facilities are shown by investigating the optimal correction values for detection of fault current, and the results indicated that it takes about 213 ms for the DC fault selective relay(50F) to fully open. In the future, the correction values of DC fault selective relay suggested in this paper will be used as the reference values of protective relay for the safe operation of DC electric railroad system such as urban railway.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.1-8
• /
• 2011

This paper describes a new method for a digital gas metal arc welding (GMAW) system. The GMAW system is an arc welding process that incorporates the GMAW power source (PS-GMAW) with a wire feed unit (WFU). The PS-GMAW requires an electric power of constant voltage. A constant magnitude is maintained for the arc current by controlling the wire-feed speed of the WFU. A mathematical model is derived, and a self-tuning fuzzy proportional-integral-derivative (PID) controller is designed and applied to control the welding current. The electrode wire feeding mechanism with this controller is driven by a DC motor, which can compensate for both the molten part of the electrode and undesirable fluctuations in the arc length during the welding process. By accurately maintaining the output welding current and welding voltage at constant values during the welding process, excellent welding results can be obtained. Simulation and experimental results are shown to prove the effectiveness of the proposed controller.

• 한국전자파학회논문지
• /
• 제18권2호
• /
• pp.151-157
• /
• 2007

본 논문에서는 모바일 장치의 T-DMB 안테나로 사용될 수 있는 급전 반대편에 open stub를 가지는 소형 two-wire helical 안테나를 제안하였다. Open stub의 길이를 조절하거나 open stub에 유전 물질을 발라 T-DMB 대역인 200 MHz에서 높이가 8 cm(200 MHz에서 0.053 $\lambda$임)인 안테나의 입력 임피던스를 쉽게 매칭시킬 수 있다. 이 안테나의 unbalanced 모드와 balanced 모드의 등가 회로를 이용하여 이 안테나의 등가 회로를 나타내고, 동작 원리를 설명하였다. 등가 회로의 해석을 토대로 open stub의 영향을 검증했다. 몇 가지 다른 파라미터 값을 가지는 안테나를 제작하였으며, 이 안테나의 $S_{11}$ 및 $S_{21}$을 측정하였다. 제작된 안테나의 임력 임피던스 대역폭($S_{11}{\leq}-10dB$)은 $196{\sim}204$ MHz(8 MHz)로 T-DMB의 한 채널(6 MHz)을 만족한다. 이 안테나의 측정된 $S_{21}$은 -38.6 dB로 동일한 높이의 모노폴 안테나와 open stub를 가지지 않은 two-wire helical 안테나의 $S_{21}$보다 약 17 dB 높다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.I
• /
• pp.31-75
• /
• 2000

The tractor is the most important machine for farming keeping probably this position also for feeding the future fast growing world population. Band width of power and functions continues to increase worldwide, examples are given. Regarding the high developed countries, general farming demands as well as precision farming issues require closed loop control principles for the system "driver-tractor-implement". Progress in information technologies supports this trend, but comprehensive component and system developments are necessary to make the tractor ready for automatic or semi-automatic controls. The following technical highlights are, for example, discussed for Europe: hydropneumatic front axle suspensions, 50 km/h top speed, front brakes, electronically controlled multivalve diesel engines, automatic hydrostatic power split CVTs, load sensing hydraulics with proportional valves, improved cab and working places with "operations by wire" and more electronics on board than ever before.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.84-91
• /
• 2004

A CCD camera with a laser stripe was applied to realize the automatic weld seam tracking in GMAW. It takes relatively long time to process image on-line control using the basic Hough transformation, but it has a tendency of robustness over the noises such as spatter and arc tight. For this reason, it was complemented with adaptive Hough transformation to have an on-line processing ability for scanning specific weld points. The adaptive Hough transformation was used to extract laser stripes and to obtain specific weld points. The 3-dimensional information obtained from the vision system made it possible to generate the weld torch path and to obtain the information such as width and depth of weld line. In this study, a neural network based on the generalized delta rule algorithm was adapted for the process control of GMA, such as welding speed, arc voltage and wire feeding speed.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.538-547
• /
• 2010

This paper deals with a stand-alone wind energy conversion system (WECS) with an isolated asynchronous generator (IAG) and voltage and frequency (VF) control feeding three-phase four-wire loads. The reference generator currents are estimated using the instantaneous symmetrical component theory to control the voltage and frequency of an IAG system. A three-leg voltage source converter (VSC) with an isolated star/delta transformer is used as an integrated VSC. An integrated VSC with a battery energy storage system (BESS) is used to control the active and reactive powers of the WECS. The WECS is modeled and simulated in MATLAB using the Simulink and the Sim Power System (SPS) toolboxes. The proposed VF controller functions as a voltage and frequency regulator, a load leveler, a load balancer and a harmonic eliminator in the WECS. A comparison is made on the rating of the VSC with and without ac capacitors connected at the terminals of an IAG. Simulation and test results are presented to verify the control algorithm.

• The Korean Journal of Ecology
• /
• 제19권6호
• /
• pp.575-582
• /
• 1996

Molipteryx fuliginosa (Uhler, 1860) is a plant juice sucker which feeds on new tips of Rubus oldhami Miquel and Zelkowa serrata Makino, and it has a strong preference for teses two plants in Korea. M. fuliginosa has one generation a year and hibernates as a young adult. Most of the winter survivors emerge in early May. It is the first time their host plants were found and reported. Females mainly lay their eggs one by one separately on the leaves of R. oldhami, and even on the steel wire, the lid guaze and the ground in the laboratory. Nymphs do not gather, but stay on the hatching site, Nymphs except the non-feeding first instar feed on young shoots. From the second to the fifth instar nymphs migrate to the upper part of the shoot and congregate in part on an expanded leaf. The new adults first appeared on 11 August, and remained in the host plant, and fed on until mid October. The duration of the hatching and molting, and the survivorship curve based on the laboratory rearing were determined.

• 한국환경과학회지
• /
• 제27권5호
• /
• pp.341-344
• /
• 2018

This study was conducted to determine the effects of dietary bentonite supplementation on the fatty acid profiles of eggs in older laying hens. A total of 90 Hy-line Brown layers, 74 weeks of age, were confined in 6 wire cages and then assigned randomly to two groups to receive one of the two diets (3 replicates of 15 older layers each) containing 0 and 0.2% bentonite for 4 weeks. After the 4-week feeding trial, no remarkable differences in individual fatty acid, saturated fatty acid (SFA), unsaturated fatty acid (UFA), and mono unsaturated fatty acid (MUFA) levels were found. However, linoleic acid, docosahexaenoic acid, and poly unsaturated fatty acid (PUFA) and UFA/SFA ratio were influenced by 0.2% bentonite. In conclusion, supplementation with 0.2% bentonite improved the profiles of PUFA more than those of SFA, UFA, and MUFA inthe eggs of the older laying hens.

• Journal of Mechanical Science and Technology
• /
• 제14권2호
• /
• pp.177-187
• /
• 2000

Dilution is an important factor which influences the properties of clad layer. In this paper the change of dilution during laser cladding and the control of dilution are simulated by a finite element method. The adaptive mesh method is adopted for the time-dependent finite element method computation so that the shape of melt pool can be well represented. The situation of the width control of melt pool is also simulated, which indicates that the dilution can be controlled if the width of melt pool is controlled. Computational results indicate that if a line energy (input energy per unit distance) remains constant the dilution will increase with time, especially at the beginning. Simulation results show that it is possible to control dilution in a certain range if the line energy decreases with time. Experiment of Nd: YAG laser cladding with wire feeding is performed. Experiment results coincide well with the FEM results.