• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.60-65
• /
• 2000

An aerodynamic design method has been developed by using a three-dimensional unstructured Euler code and an adjoint code with a discrete approach. The resulting adjoint code is applied to a wing design problem of super-sonic transport with a wing-body-nacelle configuration. Hicks-Henne shape functions are adopted far the surface geometry perturbation, and the elliptic equation method is employed fer the interior grid modification during the design process. Interior grid sensitivities are neglected except those for design parameters associated with nacelle translation. The Sequential Quadratic Programming method is used to minimize the drag with constraints on the lift and airfoil thickness. Successful design results confirm validity and efficiency of the present design method.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.464-467
• /
• 2010

Ice accretion on aircraft surface in icing condition induces external shape changes that may result in a hazard factor for aircraft safety. In case of aircraft main wing with high lift equipment, ice accretion is observed around leading edge and flap. During the design phase, location of ice accretion and associated aerodynamic characteristics must be investigated. In this study, icing effects on aerodynamic characteristics of the main wing section of KC-100 aircraft are investigated using an Eulerian-based FENSAP-ICE code in various icing conditions.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권1호
• /
• pp.99-105
• /
• 2006

In this study, nonlinear static and dynamic aeroelastic analyses for a high-aspect-ratio wing have been performed. To achieve these aims, the transonic small disturbance (TSD) theory for the aerodynamic analysis and the large deflection beam theory considering a geometrical nonlinearity for the structural analysis are applied, respectively. For the coupling between fluid and structure, the transformation of a displacement from the structural mesh to the aerodynamic grid is performed by a shape function which is used for the finite element and the inverse transformation of force by work equivalent load method. To validate the current method, the present analysis results of a high-aspect-ratio wing are compared with the experimental results. Static deformations in the vertical and torsional directions caused by an angle of attack and gravity loading are compared with experimental results. Also, static and dynamic aeroelastic characteristics are investigated. The comparisons of the flutter speed and frequency between a linear and nonlinear analysis are presented.

• 대한기계학회논문집B
• /
• 제29권3호
• /
• pp.295-305
• /
• 2005

To improve the aerodynamic effciency of TR-E2, a new configuration so called TR-E2Sl was introduced. TR-2251 is composed of different wing airfoil section and T-tail shape compared with TR-E2. Wind tunnel test for TR-EBS1 had been performed by changing the incidence angles of wing and deflection angles of control surfaces such as elevator and rudder. Also the on/off effect of ventral fin attached underneath of AFT fuselage was tested. Test result showed that variations of wing incidence angle did not cause any severe differences in aerodynamic characteristics. Longitudinal and directional characteristics of TR-E2S1 show stable for the pitch and yaw motions. However, the lateral stability of TR-E2S1 is not stable for a certain control surface deflection.

• Advances in aircraft and spacecraft science
• /
• 제4권2호
• /
• pp.93-124
• /
• 2017

Aeroelastic performance controls wing shape in flight and its behaviour under manoeuvre and gust loads. Controlling the wing‟s aeroelastic performance can therefore offer weight and fuel savings. In this paper, the rib orientation and the crenellated skin concept are used to control wing deformation under aerodynamic load. The impact of varying the rib/crenellation orientation, the crenellation width and thickness on the tip twist, tip displacement, natural frequencies, flutter speed and gust response are investigated. Various wind-off and wind-on loads are considered through Finite Element modelling and experiments, using wings manufactured through polyamide laser sintering. It is shown that it is possible to influence the aeroelastic behaviour using the rib and crenellation orientation, e.g., flutter speed increased by up to 14.2% and gust loads alleviated by up to 6.4%. A reasonable comparison between numerical and experimental results was found.

• 한국가시화정보학회지
• /
• 제19권2호
• /
• pp.48-55
• /
• 2021

In order to design a propeller with high efficiency and excellent cavitation performance, theoretical and experimental studies on the cavitation and noise characteristics according to the blade section shape are essential. In general, sheet cavitation, bubble cavitation, and cloud cavitation are the main causes of hull vibration and propeller surface erosion. However vortex cavitation, which has the greatest influence on the noise level because the fastest CIS in ship propeller, has been researched for a long time and studies have been conducted recently to control it. In this experiment, the development process of cavitation was measured by using three dimensional wings with two different wing section and wing tip shapes, and the noise level at that time was evaluated. In addition, we evaluated the relationship between cavitation inception and hydrodynamic force using three component load cell and we measured the velocity field of wing wake using LDV.

• 대한전자공학회논문지SP
• /
• 제47권2호
• /
• pp.51-60
• /
• 2010

본 논문에서는 백색광 위상천이 간섭계에서 향상된 3차원 형상 정보를 보다 빠르게 얻을 수 있는 새로운 방법을 제안한다. 백색광 위상천이 간섭계는 초정밀 제품의 형상 측정에 사용되는 유용한 방법이다. 첫째, 가시도 함수를 포함하는 간섭신호로부터 3차원 높이 정보를 신속하게 계산할 수 있는 가시도 유효 검출 구간 설정 방법을 제안한다. 둘째, 기존의 백색광 위상천이 간섭계에서 발생하는 전역 기울어짐 현상을 해결하기 위하여 바닥면 데이터 자동 추출 방법과 이를 이용한 최소 제곱 근사화 기반의 바닥 평변 추정 방법을 제안한다. 셋째, 높이의 변화가 큰 경계영역에서의 형상 왜곡인 bat-wing effect를 제거하기 위한 적응 필터 방법을 제안한다. 실험을 통해 제안하는 방법이 기존의 백색광 위상천이 간섭법의 성능을 보다 향상시킴을 보인다.

• 한국항공우주학회지
• /
• 제44권7호
• /
• pp.562-567
• /
• 2016

비행속도와 조건에 따라 최적화된 형상을 갖는 모핑 날개는 작동기 기술, 구조 기계장치 기술, 유연 외피 재료, 제어법칙 기술 등 해결할 문제가 많다. 본 연구에서는 빠른 응답속도를 갖는 모핑 날개를 개발하기 위한 첫 단계로 형상기억합금 선을 작동기와 복원용 비틀림 스프링으로 구동되는 단일 플랩을 갖는 에어포일 설계하고 제작하였다. 제작된 모핑 에어포일의 작동실험을 통해 설계 개념의 타당성을 검증하였다. 실험을 통해 측정한 결과 원활한 작동과 매우 빠른 반응속도를 확인하였다.

• 전자공학회논문지
• /
• 제50권9호
• /
• pp.46-51
• /
• 2013

본 논문에는 무인항공기에 장착된 UHF 안테나의 최적 위치 및 형상이 다양한 위치에서 EM 시뮬레이션을 통하여 분석되어져 있다. EM 시뮬레이션을 위하여 FEKO를 이용하였다. 시뮬레이션의 복잡도를 줄이고 분석시간과 메모리 이용도를 최소화하기 위하여 비행체의 복합체 구조를 레이돔 구조를 제외하고 PEC 모델로 간략화 하였다. 시뮬레이션은 무인항공기의 날개와 Ventral Fin 위치에서 수행되어 졌고, 안테나 형상은 모노폴, 다이폴, 굴곡형 모노폴 안테나들을 이용하였다. 모노폴 안테나가 비행체 날개에 장착될 경우, 오른쪽 날개와 왼쪽 날개에 각각 장착되어지기 위하여 두 개의 안테나가 필요하고, 이 두 개의 안테나들은 가시선 데이터링크 지상 안테나에 대한 무인항공기 날개 방향에 따라 전환되어져야 한다. 모노폴 안테나가 Ventral Fin에 장착될 경우, 가시선 데이터링크 지상 안테나에 대한 무인항공기 날개 방향에 상관없이 하나의 안테나로 운용 가능하다. 또한, 안테나 이득도 비행체에 의한 Blockage 감소로 개선되어진다. 안테나 이득은 굴곡형 모노폴 안테나를 이용하여 더욱 더 개선되어 진다. 결론적으로 무인항공기에 장착된 UHF 안테나의 최적 위치 및 형상은 굴곡형 모노폴 안테나를 Ventral Fin 아래에 장착하는 것이다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.208-214
• /
• 2012

This paper presents a novel approach based on the loci of instantaneous symmetrical components called "Wing Shape" which requires the measurement of three input stator currents and voltages to diagnose interturn insulation faults in three phase induction motors operating under different loading conditions. In this methodology, the effect of unbalanced supply conditions, constructional imbalances and measurement errors are also investigated. The sizes of the wings determine the loading on the motor and the travel of the wings while their areas determine the degree of severity of the faults. This approach is also applied to detect open circuit faults or single phasing conditions in induction motors. In order to validate this method, experimental results are presented for a 5 hp squirrel cage induction motor. The proposed technique helps improve the reliability, efficiency, and safety of the motor system and industrial plant. It also allows maintenance to be performed in a more efficient manner, since the course of action can be determined based on the type and severity of the fault.