• 한국항공우주학회지
• /
• 제39권1호
• /
• pp.50-55
• /
• 2011

본 연구에서는 고고도 장기 체공 항공기 날개의 스팬과 주날개보의 형상을 설계변수로 동시에 고려하는 공력-구조 동시 설계를 수행하였다. 이 때 공기역학적 성능 최대화와 중량 최소화를 한 번에 수행하기 위해 다목적 최적화를 이용하였다. 설계 대상이 된 날개는 구조적 대변형이 발생되므로 전산유체역학과 유한요소법을 이용하여 비선형 정적 공탄성 해석을 수행하였다. 설계를 위한 해석에 요구되는 계산 비용을 감소시키기 위해 반응면을 구성하였으며 이를 위해 실험계획법이 이용되었다. 또한 본 연구에서는 대변형이 발생되지 않은 형상과 대변형이 발생한 형상의 공력 성능을 비교하여 대변형이 발생하는 경우 설계를 위해 반드시 변형이 고려되어야 함을 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.384-388
• /
• 2007

Aerodynamic characteristics of Coleoptera species of Epilachna quadricollis and Allomyrina dichotoma are experimentally and numerically investigated. Using digital high speed camera and smoke wire technique, we visualized the continuous wing kinematics and the flight motion of free-flying coleoptera. The experimental visualization shows that the elytra flapped concurrently with the main wing both in the downstroke and upstroke motions. The wing motion of Epilachna quadricollis was captured and analyzed frame by frame to identify the kinematics of the wings and to implement it in the movement of a model wing (thin plate) in the simulation. The two-dimensional simulation of Epilachna quadricollis hovering flight was performed by assuming the wing cross section shape as a thin plate, even though most of insect's wings are made of curved corrugated membrane. The effect of Reynolds number are investigated by the simulation. Meanwhile, in order to investigate the role and effect of elytra, the flow visualization of Allomyrina dichotoma was carried on using smoke wire visualization technique. Here, we confirmed that the vortex generated by elytra due to its movement is strongly influence the vortex dynamic generated by hind wings.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.335-340
• /
• 2010

In this paper development of an automatic grid generation program for flow field calculation around 3D wing is described and its application is also introduced. The program is developed by using JAVA programming language and a graphic library, JOGL, and it can be usee either as an application program on a local computer or as a applet in the network environment. Currently, The program provides NACA series 4-digit airfoils as the wing cross-section shape and it offers a non-complicated GUI program which can easily generate structured grids for wings based on user's parameter input. Grid generated by the program can be selected as one of two types; O-type and C-type. In this research advancing layer method(ALM) augmented by elliptic smoothing method is used for the FLUENT. It is shown that by using current program high-quality structured grids around 3D wings can be easily generated, and typical grid generation results and flow solutions are demonstrated. Study on effects of geometric parameters on flow field is also tried by changing major wing parameters such as incidence angle type of wing-tip and sweepback angle.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.85-92
• /
• 1996

Numerical simulations are made for the three-dimensional flow around a wing in ground effect craft haying the complex geometry. A numerical tool is developed for the primary design of hull and wing shape of practical Wing-In-Ground effect(WIG) stop. The finite-difference method is utilized to descretize the governing equations and pressure field is obtained by using Marker-And-Cell(MAC) method. The air and water flows are simultaneously simulated in the time-marching solution procedure for the Navier-Stokes equation. The porosity technique and the density function are devised for the implementation of the three-dimensional body-boundary and the free-surface conditions, respectively. In this paper, a craft is modeled simply by three blocks containing a wing mounted on a main body horizontally, with the endplate. The numerical calculations of a WIG advancing in a calm water are performed and the WIG-generated wave profiles are also obtained. In the final paper, details of the numerical methods employed for the present study and calculated results are discussed.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.343-349
• /
• 2003

The fuselage-wing intersection suffers from the cyclic bending moment of variable amplitude. Therefore, the influence of cyclic bending moment on the delamination and the fatigue crack propagation behavior in AFRP/Al laminate of fuselage-wing was investigated in this study. The cyclic bending moment fatigue test in AFRP/Al laminate was performed with five levels of bending moment. The shape and size of the delamination Lone formed along the fatigue crack between aluminum sheet and aramid fiber-adhesive layer were measured by an ultrasonic C-scan. The relationships between da/dN and ΔK, between the cyclic bending moment and the delamination zone size, and between the fiber bridging behavior and the delamination zone were studied. As results, fiber failures were not observed in the delamination zone in this study, the fiber bridging modification factor increases and the fatigue crack growth rate decrease and the shape of delamination zone is semi-elliptic with the contour decreasing non-linearly toward the crack tip.

• Composites Research
• /
• 제30권5호
• /
• pp.280-287
• /
• 2017

복합재 후퇴익은 비행 중 굽힘 하중 외에도 비틀림 하중을 받아 복잡한 변형이 발생할 수 있다. 따라서 복잡한 변형이 나타나는 복합재 후퇴익의 구조 건전성 평가를 위해 복합재 후퇴익 구조물의 변위 예측이 요구된다. 날개의 변위 예측은 변위와 변형률 관계를 통해 예측할 수 있지만 후퇴익의 복잡한 변형으로 고정단 부근의 변형률 분포는 복잡하게 나타나기 때문에 일부 위치의 변형률 센서만으로 변형률을 측정하면 변위 예측의 오차가 발생할 수 있다. 본 논문에서는 복잡한 변형률 분포를 고려한 평판 형태의 복합재 후퇴익의 변위를 예측하는 연구를 수행하였다. 유한요소 해석을 통해 변형률 측정 지점을 선정하였다. 측정 지점의 변형률을 이용하여 예측한 변위는 해석에서 계산된 변위와 잘 일치하였으며, 실험을 통하여 검증하였다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.39-42
• /
• 2003

Leading edge extension(LEX) in a highly swept shape applied to a delta wing features the modern air-fighters. The LEX vortices generated upon the upper surface of the wing at high angle of attack enhance the lift force of the delta wing by way of increased negative suction pressure over the surfaces. The present 3-D stereo PIV includes the Identification of 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criterion and so on. A delta wing model with or without LEX was immersed in a circulating water channel. Two high-resolution, high-speed digital cameras$(1280pixel\times1024pixel)$ were used to allow the time-resolved animation work. The present dynamic stereo PIV represents the complicated vortex behavior, especially, in terms of time-dependent characteristics of the vortices at given measuring sections. Quantities such as three velocity vector components, vorticity and other flow information can be easily visualized via the 3D time-resolved post-processing to make the easy understanding of the LEX effect or vortex emerging and collapse which are important phenomena occurring in the field of delta wing aerodynamics.

• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.16-23
• /
• 2006

본 연구에서는 스트레이크의 형상 변화가 삼각날개의 와류 상호작용과 와류 붕괴 특성에 어떤 영향을 미치는지를 규명하기 위해 세 가지의 서로 다른 평면 형상의 스트레이크를 부착한 이중 삼각 날개 형상에 대하여 유동 가시화(flow visualization)와 날개면 정압 분포 측정의 풍동실험을 수행하였다. 압력 측정 결과 스트레이크의 후퇴각이 증가할수록 날개의 상류 시위 위치에서는 보다 강력하고 집중된 와류가 형성되지만 이 와류는 시위 뒤쪽으로 진행되면서 보다 빨리 와류 붕괴(vortex breakdown)현상을 거치며 약해지는 것을 관측하였다. 가시화 결과에서는 스트레이크의 후퇴각이 증가할수록 스트레이크 와류와 날개 와류간의 roll-up 및 통합 과정이 촉진되는 것이 상류 시위에서 집중된 와류를 발달시키는 원인인 것을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1672-1677
• /
• 2004

Leading edge extension(LEX) in a highly swept shape applied to a delta wing features the modem air-fighters. The LEX vortices generated upon the upper surface of the wing at high angle of attack enhance the lift force of the delta wing by way of increased negative suction pressure over the surfaces. The present 3-D stereo PIV includes the Identification of 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criterion and so on. A delta wing model with or without LEX was immersed in a circulating water channel. Two high-resolution, high-speed digital cameras($1280pixel{\times}1024pixel$) were used to allow the time-resolved animation work. The present dynamic stereo PIV represents the complicated vortex behavior, especially, in terms of time-dependent characteristics of the vortices at given measuring sections. Quantities such as three velocity vector components, vorticity and other flow information can be easily visualized via the 3D time-resolved post-processing to make the easy understanding of the LEX effect or vortex emerging and collapse which are important phenomena occurring in the field of delta wing aerodynamics.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.27-32
• /
• 2022

There has always been a demand for orthodontic treatment. Orthodontic treatment allows tooth to be arranged by flexible arch wire fixed with tooth-attached brackets. Arch wire generate constant pressure to tooth brackets which moves the teeth to proper place. When the bracket transmits force, the braced wing of the bracket may deform. Deformed tie wing will lead to lost tension of elastic ligature. Then, lacking grip between tie wing and ligature might delay the tooth movement. Furthermore, tooth brackets used for orthodontic treatment make contact with in direct oral surface and this cause feeling of irritation that comes from height of tooth braces. This study suggests an optimal teethe bracket design to make up for inconvenience by shorten the height of bracket and complement the shape of bracket to reduce strain rate using finite element analysis. As a result, new optimal design of teethe bracket indicates lower strain rate of the bracket wing and takes good effects of shorten body height in terms of convenience.