Browse > Article

The Fatigue Behavior and Delamination Properties in Fiber Reinforced Aramid Laminates -Case (I) : AFRP/Al Laminates-  

Song, Sam-Hong (Department of Mechanical Engineering, Korea University)
Kim, Cheol-Woong (Graduate School, Department of Mechanical Engineering, Korea University)
Publication Information
Journal of Mechanical Science and Technology / v.17, no.3, 2003 , pp. 343-349 More about this Journal
Abstract
The fuselage-wing intersection suffers from the cyclic bending moment of variable amplitude. Therefore, the influence of cyclic bending moment on the delamination and the fatigue crack propagation behavior in AFRP/Al laminate of fuselage-wing was investigated in this study. The cyclic bending moment fatigue test in AFRP/Al laminate was performed with five levels of bending moment. The shape and size of the delamination Lone formed along the fatigue crack between aluminum sheet and aramid fiber-adhesive layer were measured by an ultrasonic C-scan. The relationships between da/dN and ΔK, between the cyclic bending moment and the delamination zone size, and between the fiber bridging behavior and the delamination zone were studied. As results, fiber failures were not observed in the delamination zone in this study, the fiber bridging modification factor increases and the fatigue crack growth rate decrease and the shape of delamination zone is semi-elliptic with the contour decreasing non-linearly toward the crack tip.
Keywords
Cyclic Bending Moment; AFRP/Al Laminate; Crack Bridging Effect; Delamination Zone; Fiber Bridging Modification Facto; Crack Growth Rate(da/dN); C-Scan image;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Anderson, T. L., 1994, 'Fracture Mechanics-Fundamentals and Applications,' Second Edition, CRC Press, p. 63
2 Song Sam-Hong and Kim Cheol-Woong, 2001, 'The Mixture Ratio Effect Resin, Curing Agent and Accelerator on the Fatigue Behavior of FRMLs,' Transactions of the KSME, A, Vol. 25, No. 4, pp. 592-601   과학기술학회마을
3 Takamatsu, T., Matsumura, T., Ogura, N., Shimokawa, T. and Kakuta, Y., 1999, 'Farigue Crack Growth Properties of a GLARE3-5/4 fiber/metal Laminate,' Engineering Fracture Mechanics, Vol. 63, pp. 253-272   DOI   ScienceOn
4 Toi, Y., 1996, 'An Experimental Crack Growth Model for Fiber/metal Laminates,' Proceedings of the Eighteenth Symposium of ICAF, Melbourne, pp. 899-909
5 Gunnink, J. W., Verbruggen, M. L. C. E. and Vogelesang, 1984, 'ARALL, A Light Weight Structural Material for Impact and Fatigue Sensitive Structures,' The 10th European Rotorcraft Forum, The Hague, The Netherlands, pp. 241-254
6 Marissen, R., 1984, 'Fatigue Crack Growth in Aramid Reinforced Aluminum Laminates (ARALL)-Mechanisms and Predictions,' DFVLR, Institut fiir Werkstoff-Forschung, DFVLR-FB-84-37
7 Lin, C. T., Kao, P. W. and Yang, F. S., 1991, Composite, Vol. 2, p. 135   DOI   ScienceOn
8 Kim Cheol-Woong and Sohn Se-Won, 1999, 'Study on the Effect of Resin Mixture Ratio on the Fatigue Crack Propagation Behavior and Mechanical Property in a FRMLs,' Journal of the KSPE, Vol. 16, No. 8, pp. 149-154   과학기술학회마을
9 Macheret, J., Teply, J. L. and Winter, E. F. M., 1989, Polymer Composites, Vol. 10, p. 322   DOI
10 Marissen, R., 1988, 'Fatigue Crack Growth in ARALL : A Hybrid Aluminum-Aramid Composite Material : Crack Growth Mechanism and Quantitative Prediction of the Crack Growth Rates,' Ph. D. Thesis, Delft University of Technology
11 Roebroeks, G. H. J. J., 1987, 'Constant Amplitude Fatigue of ARALL-2 Laminates,' Report LR-539, Dept. of Aerospace Engineering, Delft University of Technology
12 Song Sam-Hong and Kim Cheol-Woong, 2000, 'The Influence of Resin Mixture Ratio for the Use of Prepreg on the Fatigue Behavior Properties in FRMLs,' International Journal of the KSPE, Vol. 1, No. 1, pp. 33-41   과학기술학회마을