• Journal of Korean Vacuum Science & Technology
• /
• 제4권1호
• /
• pp.6-10
• /
• 2000

Ferroelectric YMnO$_3$ thin films were deposited on $Y_2$O$_3$/si(100) substrates by metalorganic chemical vapor deposition. The YMnO$_3$ thin films annealed in vacuum ambient (100 mTorr) above 75$0^{\circ}C$ show hexagonal structured YMnO$_3$. However, the film annealed in oxygen ambient shows poor crystallinity, and the second phase as $Y_2$O$_3$ and orthorhombic-YMnO$_3$ were shown. The annealing ambient and pressure on the crystallinity of YMnO$_3$ thin films is very important. The C-V characteristics have a hysteresis curve with a clockwise rotation, which indicates ferroelectric polarization switching behavior. When the gate voltage sweeps from +5 to 5 V, the memory window of the Pt/YMnO$_3$/Y$_2$O$_3$/Si gate capacitor annealed at 85$0^{\circ}C$ is 1.8 V. The typical leakage current densities of the films annealed in oxygen and vacuum ambient are about 10$^{-3}$ and 10$^{-7}$ A/cm$^2$ at applied voltage of 5 V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.58-61
• /
• 2001

Metal-insulator-semiconductor (MIS) C-V properties with high dielectric AIN thin films showed no hysteresis and good interface properties. The dielectric constant of the AIN film calculated from the capacitance at the accumulation region in the capacitance-voltage(C-V) characteristics was about 8. The C-V characteristics of MFIS capacitor showed a hysteresis loop due to the ferroelectric nature of the LiNbO$_3$ thin films. Typical dielectric constant value of LiNbO$_3$ film of MFIS device was about 23. The memory window width was about 1.2V at the gate voltage of $\pm$5 V ranges. Typical gate leakage current density of the MFIS structure was the order of 10$^{-9}$ A/cm$^2$ at the range of within $\pm$500 kV/cm. The ferroelectric capacitors showed no polarization degradation up to about 10$^{11}$ switching cycles when subjected to symmetric bipolar voltage pulse(peak-to-peak 8V, 50% duty cycle) in the 500kHz.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권8호
• /
• pp.2928-2947
• /
• 2015

Adaptive Gaussian filter (AGF) is a recently developed switching filter to remove salt and pepper noise. AGF first directly identifies pixels of gray levels 0 and 255 as noise pixels, and then only restored noise pixels using a Gaussian filter with adaptive variance based on the estimated noise density. AGF usually achieves better denoising effect in comparison with other filters. However, AGF still fails to obtain good denoising effect on images with noise-free pixels of gray levels 0 and 255, due to its severe false alarm in its noise detection stage. To alleviate this issue, a modified version of AGF is proposed in this paper. Specifically, the proposed filter first performs noise detection via an image block based noise density estimation and sequential noise density guided rectification on the noise detection result of AGF. Then, a modified Gaussian filter with adaptive variance and window size is used to restore the detected noise pixels. The proposed filter has been extensively evaluated on two representative grayscale images and the Berkeley image dataset BSDS300 with 300 images. Experimental results showed that the proposed filter achieved better denoising effect over the state-of-the-art filters, especially on images with noise-free pixels of gray levels 0 and 255.

• 한국전자통신학회논문지
• /
• 제15권4호
• /
• pp.753-758
• /
• 2020

본 논문에서는 개발된 수직교반히터를 시설하우스에 적용하고, 그 외 시설물(순환팬, 환기팬, 개폐 모터를 이용한 창문, 천장, 제습)을 통합적으로 제어할 수 있는 제어 시스템을 개발하고자 한다. 이를 통해 작물의 재배 효율을 올리고 무가온 저장고나 저장창고 등이 보유한 수확물의 보관 환경을 개선하여 저장 기간 및 신선도를 증대시키고자 한다. 또한 ICT 모니터링 기술을 추가하여 사용자가 RTC(: Real Time Control)로 재배 및 저장 환경의 변화에 따라 문제가 생겼을 시에 손쉽게 해결할 수 있도록 하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.71-74
• /
• 2000

Pt/Pb$TiO_3$/$SrTiO_3$/p-Si films were prepared by metallo-organic solution deposition(M0SD) method and investigated its structure and ferroelectric properties. Crystallinity of specimen as a funtions of post annealing temperature and the thickness of $SrTiO_3$(STO) buffer layer was studied using XRD and AFM. Based on C-V and P-E curve, $PbTiO_3$(PTO) capacitors showed good ferroelectric hysteresis arising from the polarization switching properties. When the thickness of ST0 buffer layer between PTO and Si substrate was 260 nrn and the post annealing temperature was $650^{\circ}C$, it was showed that production of the pyrochlore phase due to interdiffusion of Si into FTO was prevented. The dielectric constant of FTO thin films calculated from a maximum Cma in the accumulation region was 180 and the dielectric loss was 0.30 at 100 kHz frequency. The memory window in the C-V curve is 1.6V at a gate voltage of 5V.

• 대한전자공학회논문지TC
• /
• 제41권9호
• /
• pp.73-80
• /
• 2004

본 논문에서는, 고성능 결함 감내 셀 스위치인, 사이클릭 벤얀 망의 셀 순서의 무결성 문제를 해결하기 위한 셀 재배열 버퍼를 제시한다. 사이클릭 벤얀 스위치는, 편향 자기 경로제어를 사용하여, 입력 정합과 출력 정합 사이에 다중 경로들을 제공함으로써, 높은 신뢰성을 제공하고, 스위치의 내부 링크들의 혼잡 문제를 해결한다. 그런데, 이러한 다중 경로들은 길이가 서로 다를 수 있다 따라서 셀들이 입력 정합에 도착한 순서와 다르게 출력 정합에 도달할 수 있다. 제안된 셀 재배열 버퍼는 이러한 셀 순서의 무결성 문제를 해결하는 일종의 하드웨어 슬라이딩 윈도우 메커니즘이다. 본 장치 구성의 주요 비용은 슬라이딩 윈도우를 구성하는 하드웨어 비용이다. 따라서 필요한 슬라이딩 윈도우의 크기를 계산하기 위해서, 비균일 주소 분포를 가진 트래픽 부하 하에서 스위치를 시뮬레이션하여, 셀들이 스위치를 통과할 때 발생하는 지연 분포를 분석을 하였다. 이 분석을 통하여, 적은 양의 범용 메모리와 제어 논리를 사용하여, 셀 순서의 무결성 문제를 해결하는 셀 재배열 버퍼를 만들 수 있다는 사실을 밝혔다. 본 논문에서 제시한 셀 재배열 버퍼는 다른 다중 경로 스위칭 망들을 위해서도 사용될 수 있다.

• 대한전자공학회논문지SD
• /
• 제38권11호
• /
• pp.765-770
• /
• 2001

고온 급속 열처리시킨 LiNbO₃/AIN/Si(100) 구조를 이용하여 MFIS 소자를 제작하고, 비휘발성 메모리 동작 가능성을 확인하였다. 고유전율 AIN 박막 위에 Pt 전극을 증착시켜 제작한 MIS 구조에서 측정한 1MHz C-V 특성곡선에서는 히스테리시스가 전혀 없고 양호한 계면특성을 보였으며, 축적 영역으로부터 산출한 비유전율 값은 약 8 이었다. Pt/LiNbO₃/AIN/Si(100) 구조에서 측정한 1MHz C-V 특성의 축적영역에서 산출한 LiNbO₃ 박막의 비유전율 값은 약 23 이었으며, ±5 V의 바이어스 범위 내에서의 메모리 윈도우는 약 1.2 V이었다. 이 MFIS 구조에서의 게이트 누설전류밀도는 ±500 kV/cm의 전계 범위 내에서 10/sup -9/ A/㎠ 범위를 유지하였다. 500 kHz의 바이폴러 펄스를 인가하면서 측정한 피로특성은 10/sup 11/ cycle 까지 초기값을 거의 유지하는 우수한 특성을 보였다.

• 한국미생물·생명공학회지
• /
• 제21권4호
• /
• pp.354-365
• /
• 1993

A novel control method with automatic tuning of PID controller parameters has been developed for efficient regulation of dissolved oxygen concentration in fed-batch fermentations of Escherichia coli. Agitation speed and oxygen partial pressure in the inlet gas stream were chosen to be the manipulated variables. A heuristic reasoning allowed improved tuning decisions from the supervision of control performance indices and it coule obviate the needs for process assumptions or disturbance patterns. The control input consisted of feedback and feedforword parts. The feedback part was determined by PID control and the feedforward part is determined from the feed rate. The proportional gain was updated on-line by a set of heuristics rules based on the supervision of three performance indices. These indices were output error covariance, the average value of output error, and input covariance, which were calculated on-line using a moving window. The integral and derivative time constants were determined from the period of output response. The specific growth rate was maintained at a low level to avoid acetic acid accumulation and thus to achieve a high cell density. The specific growthe rate was estimated from the carbon dioxide evolution rate. In fed-batch fermentation, the simutaneous control of dissolved oxygen concentration (at 0.2; fraction of saturated value) and specific growth rate (at 0.25$hr^{-1}$) was satisfactory for the entire culture period in spite of the changes in the feed rate and the switching of control input.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.420-424
• /
• 1999

전계효과 트랜지스터와 광 다이오우드 및 다층 양자우물구조 광 변조기로 구성되는 광 스위치 회로와 몇 가지 전광 송/수신기 회로(all-optical transmitter/receiver circuits)에 대하여 시변 천이 동작 특성을 SPICE를 사용 모사한 결과를 기술하였다. 본 모사 실험에서 광 변조기 소자의 수광 창의 크기는 20 $\mu\textrm{m}$ $\times$ 20 $\mu\textrm{m}$으로 고려하였고 사용된 FET 소자의 게이트 폭은 100 $\mu\textrm{m}$이며 전달컨덕턴스 값은 측정된 소자 특성에서 55 mS/mm로 사용되었다. 모사 결과 광 논리소자의 고속 동작을 위해서는 소자의 크기를 줄이며 입력 광 다이오우드의 responsivity가 최대값을 가지는 바이어스점에 동작하도록 설계하고, 짧고 강한 세기의 광선을 입력 광 신호로 사용해야 함을 알 수 있었다.

• Journal of Korean Neurosurgical Society
• /
• 제60권3호
• /
• pp.335-347
• /
• 2017

Intravenous recombinant tissue plasminogen activator had been the only approved treatment for acute ischemic stroke since its approval in 1995. However, the restrictive time window, numerous contraindications, and its low recanalization rate were all limitations of this modality. Under those circumstances, endovascular stroke therapy went through a great evolution during the past two decades of intravenous thrombolysis. The results of the 2013 randomized trials for endovascular stroke therapy were neutral, although they were limited by insufficient imaging screening at enrollment, early-generation devices with less efficacy, and treatment delays. Huge progress was made in 2015, as there were five randomized clinical trials which all demonstrated the safety and efficacy of endovascular stroke treatment. Despite differences in detail patient enrollment criteria, all 5 trials employed key factors for good functional recovery; (1) screening with non-invasive imaging to identify the proximal occlusion and exclude a large infarct core, (2) using highly effective modern thrombectomy devices mainly with stent retriever, and (3) establishment of a fast workflow to achieve effective reperfusion. The results of those trials indicate that modern thrombectomy devices can allow for faster and more effective reperfusion, which can lead to improved clinical outcomes compared to intravenous thrombolysis alone. These advances in mechanical thrombectomy are promising in the global fight against ischemic stroke-related disability and mortality. Two current mainstreams among such mechanical thrombectomy techniques, "stent retriever thrombectomy" and "direct clot aspiration", are the topic of this review. Stent retriever thrombectomy using Solitaire and Trevo retriever will be firstly discussed. And, the commonalities and the differences between two major clot aspiration thrombectomy techniques; a direct aspiration first pass technique (ADAPT) and forced arterial suction thrombectomy (FAST), will be additionally explained. Finally, details regarding the combination of direct clot aspiration and stent retriever thrombectomy, the switching strategy and the Solumbra technique, will be described.