• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.59-65
• /
• 2016

MVR evaporation is a method of pressurizing the evaporating steam to raise its temperature with an electric compressor instead of burning fuel and reusing the heat source through the embraced heat exchanger to minimize energy use. MVR desalination system with wind power uses varying wind power instead of stable electricity and can flexibly control the volume of fresh water production. The present study introduces the design, construction and operation of a MVR desalination system of 30ton/day capacity. Experimental results, MVR compression ratio is higher than 1.5, temperature difference of the main heat exchanger is $5{\sim}7^{\circ}C$. This value shows the same performance as the designed value.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.298-303
• /
• 2013

In this study, the installation effects of a windbreak net on reducing wind speed were examined using meteorological observation data. Three automatic weather systems (AWS) were installed at the inside of the windbreak net of an apple orchard along the distance, and one AWS was located at the outside. They were set up on Oct. $25^{th}$, 2012 at the apple orchard of Geochang County, and meteorological data, which were observed at four stations for about 1 year from October 26, 2012 through October 21, 2013, were used for this study. Meteorological variables include air temperature & relative humidity at a height of 1.5 meter, and wind speed & wind direction at a height of 2 meter and 4 meter. These variables were measured and recorded every 60 seconds. The preliminary results of this study was as follows: (1) Daily mean temperature at the inside of the windbreak net was lower than that of the outside by 0.1 through $0.2^{\circ}C$. (2) Daily mean relative humidity at the inside of the windbreak net was higher than that of the outside by 0.7 through 1.7%. (3) As compared to the outside, northerly daily maximum wind speed of the inside of the windbreak net at a height of 2 and 4 meter was reduced by 0.7~1.5 $ms^{-1}$ (30.4~65.2%) and 0.3~0.7 $ms^{-1}$ (10.3~24.1%), respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.282-285
• /
• 2008

NREL Phase VI 12% 축소모델을 사용한 표준풍력터빈 풍동시험은 2006$\sim$2007년에 수행되었다. 1,2차 풍동시험은 복합재 및 알루미늄 블레이드를 사용하여 블레이드 제작정밀도 및 표면상태에 의한 영향을 파악하기 위해 수행되었다. 3차 풍동시험은 축소효과보상기법 개발을 위해 수행되었다. Bo-105 40% 모델에 사용된 코드확장기법을 적용하여 15% 코드확장 블레이드를 사용하여 풍동시험을 수행하였다. 시험결과 코드확장기법을 적용할 경우 풍속에 대한 토크 기울기는 실물모델과 잘 일치하나, 최대토크 대비 8%정도 간극을 나타내고 있다. 풍력터빈 블레이드와 같이 캠버가 큰 익형을 사용하는 회전체에 대한 수정된 보상기법을 적용할 경우 이러한 간극은 보상될 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.245-248
• /
• 2006

풍력터빈 풍동시험의 경우 모델 축소에 의한 레이놀즈 수 감소가 ?V력터빈 성능에 미치는 영향이 적절히 고려되어야 한다. 본 연구를 통해 수치해석과 축소모델 풍동시험을 통해 모델 축소효과를 파악하여 이를 적절히 보상하는 기법을 개발하고자 한다. 이를 위해 풍력터빈 형상 및 실물모델 시험데이터가 공개되어 있는 NREL Phase VI 모델을 표준모델로 선정하여 수치해석 및 풍동시험을 수행하였다. 풍동시험은 KARI LSWT에서 2006. 10에 수행되었으며, 블레이드 끝단 속도를 실물 모델과 일치시켰으며 시험부 유속은 $0{\sim}25m/s$, 블레이드 설치각은 3도 조건을 기준조건으로 사용하였다. 축소모델 시험결과 최대토크는 약 10% 정도 감소현상을 보이고 있다.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.46-49
• /
• 2010

Fiber Reinforced Plastic (FRP) insulator has a higher performance than porcelain. It is only used in domestic AC 25 kV electric railway system. Seoul Metro has developed DC 1500 V FRP insulator since 2008. FRP support insulator of flexible property is affected by the wind in tunnel. A wind tunnel test was carried out to measure influence on the insulator housing when the train passed by. The test results showed that the wind which is resulted from the passing train had a little impact on the FRP insulator shed movements.

• New & Renewable Energy
• /
• v.2 no.4 s.8
• /
• pp.12-18
• /
• 2006

풍력터빈 풍동시험의 경우 모델 축소에 의한 레이놀즈 수 감소가 풍력터빈 성능에 미치는 영향이 적절히 고려되어야 한다. 본 연구를 통해 수치해석과 축소모델 풍동시험을 통해 모델 축소효과를 파악하여 이를 적절히 보상하는 기법을 개발하고자 한다. 이를 위해 풍력터빈 형상 및 실물모델 시험데이터가 공개되어 있는 NREL Phase VI 모델을 표준모델로 선정하여 수치해석 및 풍동시험을 수행하였다. 풍동시험은 KARI LSWT에서 2006. 10에 수행되었으며, 블레이드 끝단 속도를 실물 모델과 일치시켰으며 시험부 유속은 0$\sim$25m/s, 블레이드 설치각은 3도 조건을 기준조건으로 사용하였다. 축소모델 시험결과 최대토크는 약 10% 정도 감소현상을 보이고 있다.

• Smart Structures and Systems
• /
• v.26 no.6
• /
• pp.703-720
• /
• 2020

This paper investigates the safety of the wind turbine blade against excessive deformation. For this purpose, the performance of the blade in the along-wind direction is improved by longitudinal stiffener made of shape memory alloy. The rationale behind the selection of this smart material is due to its ability to offer excellent thermo-mechanical behaviour at low strain. Here, Liang-Roger model is adopted for vibration control, and the super-elastic effects are utilised for blade stiffening. Turbulent wind fields are generated at the hub height using TurbSim and the corresponding loads are evaluated using blade element momentum theory. An efficient switching algorithm is developed along with performance curves that enable the designer to select an optimal mode of heating depending upon the operational scenario. Numerical results presented in this paper clearly demonstrate the performance envelope of the proposed stiffener and its influence on the reliability of the blade.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.357-361
• /
• 2012

Anemometer is a meteorological instrument that measures wind direction and wind speed in real time, and is mounted to the cranes that are used at ports, shipbuilding yards, off-shore structure, or construction sites that are influenced by wind, and it is used in conjunction with the safety system. Load cell-type anemometer measures the wind direction through the ratio of load between 4 positions by mounting the thin plate to 4 load cells, and measures wind velocity through the summation of loads. In this study, we compared and analyzed the results in the theoretic approach, analytic approach and experimental approach to derive the correlation between load ratio and wind direction. Wind direction was selected as the design variable, and selected 9 wind direction conditions from $0^{\circ}{\sim}90^{\circ}$ with $11.25^{\circ}$ space for analysis, and 10 wind direction conditions with $10^{\circ}$ space for experiment.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.3
• /
• pp.5-9
• /
• 2013

In this study, operational vibration experiment and analysis have been conducted for the 4-blade small vertical-axis wind turbine (VAWT) including the effect of tower elastic behavior. Computational structural dynamics analysis method is applied to obtain Campbell diagram for the VAWT with elastic tower. An open type wind-tunnel is used to change and keep the wind velocity during the ground test. Equivalent elastic tower is used to support the VAWT so that the effect of elastic stiffness of the tower can be considered in the present vibration experiment. Various excitation conditions with wind loads are considered and the dominant operating vibration phenomena are physically investigated in detail.

• Journal of Environmental Science International
• /
• v.16 no.1
• /
• pp.73-79
• /
• 2007

The purpose of this study is to clarify the effect of mountain-valley wind on heat island formed in urban area which is located around valley mouth. The meteorological observations were carried out over the Dalbi-valley under a clear summer pressure patterns, and some consideration were tried from the results. In order to make clear the climatological characteristics and air-mass modification process of the mountain-valley wind over the valley, the meteorological observations were done simultaneously at two points. The observational points were located at the breast and valley mouth parts, respectively. The results were as follows: First, it was found that the valley wind was observed through the daytime, and it was replaced by a mountain wind after sunset. Second, the heat budget is also investigated with observation data. The sensible heat flux over the breast of Dalbi-valley reached to about $200 W/m^2$ during daytime, which is a little more than one third of net radiation. On the other hand, the sensible heat flux represented negative values during nighttime. But the sensible heat flux over the valley mouth covered by asphalt showed plus value(about $20{\sim}30 W/m^2$) during the nighttime.