• Wind and Structures
• /
• 제24권1호
• /
• pp.1-24
• /
• 2017

Wind environment in urban residential areas is an important index to consider when evaluating the living environment. However, due to the complexity of the flow field in residential areas, it is difficult to specify the correct inflow boundary conditions in the large eddy simulation (LES). In this paper, the weighted amplitude wave superposition (WAWS) is adopted to simulate the fluctuating velocity data, which satisfies the desired target wind field. The fluctuating velocity data are given to the inlet boundary of the LES by developing an UDF script, which is implemented into the FLUENT. Then, two numerical models - the empty numerical wind tunnel model and the numerical wind tunnel model with spires and roughness elements are established based on the wind tunnel experiment to verify the present method. Finally, the turbulence generation approach presented in this paper is used to carry out a numerical simulation on the wind environment in an urban residential area in Lisbon. The computational results are compared with the wind tunnel experimental data, showing that the numerical results in the LES have a good agreement with the experimental results, and the simulated flow field with the inlet fluctuations can generate a reasonable turbulent wind field. It also shows that strong wind velocities and turbulent kinetic energy occur at the passageways, which may affect the comfort of people in the residential neighborhood, and the small wind velocities and vortexes appear at the leeward corners of buildings, which may affect the spreading of the pollutants.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.435-453
• /
• 2013

A new computational approach for the rain load on the transmission tower is presented to obtain the responses of system subjected to the wind and rain combined excitations. First of all, according to the similarity theory, the aeroelastic modeling of high-voltage transmission tower is introduced and two kinds of typical aeroelastic models of transmission towers are manufactured for the wind tunnel tests, which are the antelope horn tower and pole tower. And then, a formula for the pressure time history of rain loads on the tower structure is put forward. The dynamic response analyses and experiments for the two kinds of models are carried out under the wind-induced and wind-rain-induced actions with the uniform and turbulent flow. It has been shown that the results of wind-rain-induced responses are bigger than those of only wind-induced responses and the rain load influence on the transmission tower can't be neglected during the strong rainstorm. The results calculated by the proposed method have a good agreement with those by the wind tunnel test. In addition, the wind-rain-induced responses along and across the wind direction are in the same order of response magnitude of towers.

• 한국공간구조학회논문집
• /
• 제16권1호
• /
• pp.65-72
• /
• 2016

Aerodynamic performance of solar wing system has been evaluated through wind tunnel test. The test model has 12 panels, each supported by 2 cables. The panels were installed horizontally flat, and gaps between panels were set constant. Sag ratios of 2% and 5%, and wind directions between $0^{\circ}$ and $90^{\circ}$ were considered. Mass of test model was determined considering the mass of full scale model, and Froude number and Elastic parameter were satisfied by adjusting the mean wind speed. From the wind tunnel test, it was found that the aerodynamic performance of the solar wing system is very dependent on the wind directions and sag ratios. When the sag was 2%, the fluctuating displacements between the wind directions of $0^{\circ}$ and $30^{\circ}$ increase proportionally to the square of the mean wind speed, implying buffeting-like vibration and a sudden increase in fluctuating displacement was found at large mean wind speed for the wind directions larger than $40^{\circ}$. When the wind direction was larger than $60^{\circ}$, a sudden increase was found both at low and large mean wind speed. When the sag ratio is 5%, distribution of mean displacements is different from that of sag ratio of 2%, and the fluctuating displacements show very different trend from that of sag ratio of 2%.

• 국제초고층학회논문집
• /
• 제11권4호
• /
• pp.287-300
• /
• 2022

Unconventional structures are getting more popular in recent days. Large-span roofs are used for many structures, such as airports, stadiums, and conventional halls. Identifying the pressure distribution and wind load acting on those structures is essential. This paper offers a collaborative study of computational fluid dynamics (CFD) simulations and wind tunnel tests for assessing wind pressure distribution for a building with a combined slender curved roof. The hybrid turbulence model, Improved Delayed Detached Eddy Simulation (IDDES), simulates the open terrain turbulent flow field. The wind-induced local pressure coefficients on complex roof structures and the turbulent flow field around the structure were thus calculated based upon open terrain wind flow simulated with the FLUENT software. Local pressure measurements were investigated in a boundary layer wind tunnel simultaneous to the simulation to determine the pressure coefficient distributions. The results predicted by CFD were found to be consistent with the wind tunnel test results. The comparative study validated that the recommended IDDES model and the vortex method associated with CFD simulation are suitable tools for structural engineers to evaluate wind effects on long-span complex roofs and plan irregular buildings during the design stage.

• 한국항공우주학회지
• /
• 제48권2호
• /
• pp.119-125
• /
• 2020

본 논문에서는 국방과학연구소에서 신규 건설한 천음속풍동을 소개하고 성능에 대하여 기술하였다. 천음속풍동은 인젝터구동(Injection Driven), 폐회로(Closed Circuit) 방식의 풍동으로 시험부 크기가 가로, 세로 각각 1.5m이다. 마하수는 0.3에서 1.2까지 연속적으로 변화가능하며, 노즐을 교체하여 마하수 1.4 실험이 가능하다. 풍동의 전압력(Total Pressure)을 100kPa에서 550kPa까지 변화시킬 수 있으며, 그에 따라 레이놀즈수(Reynolds Number)를 크게 변화시켜 실험을 수행할 수 있다. 풍동의 성능을 검증하기 위하여 AGARD-B 표준모형을 이용하여 6분력 공력계수 측정 실험을 수행하였으며, 그 결과를 국과연 삼중음속풍동 및 세계 여러 풍동의 실험결과와 비교 분석하였다.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.1091-1096
• /
• 2010

본 연구는 풍하중 하에서 컨테이너 크레인의 전도사고 예방을 위한 경보시스템용 기준데이터를 도출하기 위하여 수행되었다. 분석방법으로 유동구조연성해석과 풍동실험이 사용되었으며, 크레인의 안정성에 대한 풍하중의 영향을 평가하기 위하여 컨테이너 터미널에서 널리 사용되고 있는 50 톤급 컨테이너 크레인이 해석모델로 선정되고, 19 가지 풍향이 설계변수로 채택되었다. 연구방법은 먼저 경계층풍동을 사용하여 풍향에 따른 컨테이너 크레인 모형에 대한 풍동실험을 수행한 후, ANSYS 와 CFX 를 사용하여 실제 크레인의 유동구조연성해석을 수행하였다. 다음으로 유동구조연성해석을 통해 산출된 부상력과 풍동실험을 통해 도출된 부상력을 비교하여 두 방법에 있어서 차이을 보정하기 위한 식을 제시하였다.

• 한국방재안전학회논문집
• /
• 제6권2호
• /
• pp.49-56
• /
• 2013

본 논문에서는 재난변동풍하중을 받는 고층건물의 예비설계과정에서 필요로 하는 자료를 얻기 위하여 경계층풍동 실험을 실시했다. 먼저 본 실험에 앞서 경계층풍동내의 자연풍을 얻기 위하여 확산장치를 이용했고, 이로부터 평균풍속 수직분포, 난류강도, 파워스펙트럼으로 입증했으며, 이 후 변장비 1:2 강체모형을 이용 경계층풍동실험을 실시한 결과로부터 다음과 같은 결론을 얻을 수 있었다. 1. 경계층풍동에서의 평균풍속 및 난류강도의 수직분포가 자연풍과 같이 잘 실현되었다. 2. 변동풍속 스펙트럼은 Von Karman spectrum과 비교한 결과 잘 일치했다. 3. 변동압력 스펙트럼에서 풍상면의 피크분포는 0.01-0.1 Hz영역에서 발생했고, 풍후면은 0.1 Hz영역에서 발생했다. 4. 자기상관계수는 재난변동풍하중의 작용시간이 증가하면 정성확률과정으로 분포하는 사실을 알 수 있었다.

• Wind and Structures
• /
• 제35권3호
• /
• pp.147-155
• /
• 2022

This research proposes a wind-lens turbine design that can startup and operate at a low wind speed (< 5m/s). The performance of the wind-lens turbine was investigated using CFD and wind tunnel testing. The wind-lens turbine consists of a 3-bladed horizontal axis wind turbine with a diameter of 0.6m and a diffuser-shaped shroud that uses the suction side of the thin airfoil SD2030 as a cross-section profile. The performance of the 3-bladed wind-lens turbine was then compared to the two-bladed rotor configuration while keeping the blade geometry the same. The 3-bladed wind-lens turbine successfully startup at 1m/s and produced a torque of 66% higher than the bare turbine, while the two-bladed wind-lens turbine startup at less than 4m/s and produced a torque of 186 % higher than the two-bladed bare turbine at the design point. Findings testify that adding the wind-lens could improve the bare turbine's performance at low wind speed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.777-780
• /
• 2011

초음속 풍동은 고속으로 운용되는 비행체나 유도무기의 개발에 있어 시험체 주위에서 나타나는 공기역학적 현상을 연구하고 특성을 대표하는 물리량을 측정하기 위해 주로 사용되는 지상시험 장비이다. 본 연구에서는 연구팀에서 보유하고 있는 소형 초음속 풍동이 갖는 시험 모델 크기의 제약을 완화하고자 $250mm{\times}200mm$ 의 시험부를 갖는 초음속 풍동을 설계하고 제작된 풍동의 성능 평가를 수행하였다. 제작된 풍동의 시험 마하수는 2.5이며 시험부에서 균일한 유동을 얻을 수 있도록 경계층 보정을 수행하여 노즐의 형상을 결정하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.447-452
• /
• 2000

In this study, the design of Free-Fall Simulator was carried out using concept of vertical wind tunnel. Free-Fall Simulator is not an experimental equipment but a training equipment. Therefore Free-Fall Simulator needs a large training section compared with test section of wind tunnel and has critical limit of height. These limits bring about the difficulty of design for a return passage. Due to small area ratio, the downstream flow of training section with high speed is not decelerated adequately to the fan section. High-speed flow leads to great losses in the small area ratio diffuser and corner. So design of diffusers and corners located between training section and fan section has a great effect on the Free-Fall Simulator performance. This study used an estimation method of subsonic wind tunnel performance. It considered each section of Free-Fall Simulator as an independent section. Therefore loss of one section didn't affect loss of other sections. Because losses of corner with vane and $1^{st}$ diffuser are most parts of overall Free-Fall Simulator, this study focused on the design of these sections.