• Structural Engineering and Mechanics
• /
• 제36권4호
• /
• pp.401-419
• /
• 2010

This paper focuses on the development, verification and application of a three-dimensional nite element code for coupled thermal and structural analysis of roller compacted concrete arch dams. The Ostour Arch dam located on Ghezel-Ozan River, Iran, which was originally designed as conventional concrete arch dam, has been taken for the purpose of verication of the nite element code. In this project, RCC technology has been ascertained as an alternative method to reduce the cost of the project and make it competitive. The thermal analysis has been carried out taking into account the simulation of the sequence of construction, environmental temperature changes, and the wind speed. In addition, the variation of elastic modulus with time has been considered in this investigation using Concard's model. An attempt was made to compare the stresses developed in the dam body five years after the completion of the dam with those of end of the construction. It was seen that there is an increase in the tensile stresses after five years over stresses obtained immediately at the end of construction by 61.3%.

• 해양환경안전학회지
• /
• 제2권1호
• /
• pp.35-45
• /
• 1996

The assesment of the safety of ship's transit in a curved narrow channel consists of the maneuvering safety determined by the chance of running aground, the maneuvering difficulty determined by ship's workload, and shiphandler's subjective evaluation. In this study to examine the correlation between shiphandler's subjective evaluation and the maneuvering risk, the real-time and full-mission shiphandling simulator in the Korea Marine Training & Research Institutes(KMTRI) was utilized. On the conning bridge of the shiphandling simulator, 50 experienced masters conducted the modeled vessel of 60,000 deadweight tonnage along the designed channel under 3 different environmental conditions. The findings were as follows : (1) The frequencies of stress levels, work difficulties, vessel controllability and overall workload of shiphandlers are similar irrespective of environmental conditions and they are able to be represented as shiphandler's subjective evaluation. (2) It s possible to assess and analyze theoretically the correlation between the shiphandler's subjective evaluation and maneuvering risk under each environmental condition by quantifying the data obtained from the test. The results are as follows : ① As the degree of maneuvering risk increases, the shiphandler's subjective evaluation increases sharply near the curvature area of the designed channel. ② In the area of the curvature of the designed channel, maneuvering risk sincreases sharply with the danger of running aground under the environmental condition of current and wind coming from the stern.

• 한국재료학회지
• /
• 제25권10호
• /
• pp.523-530
• /
• 2015

Electricity generation through fossil fuels has caused environmental pollution. To solve this problem, research on new renewable energy (solar, wind, geothermal heat, etc.) to replace fossil fuels is in progress. These devices are able to consistently generate power. However, they have many drawbacks, such as high installation costs and limitations in possible set-up environments. Thus, piezoelectric harvesting technology, which is able to overcome the limitations of existing energy technologies, is actively being studied. Piezoelectric harvesting technology uses the piezoelectric effect which occurs in crystals that generate voltage when stress is applied. Therefore, it has advantages such as a wider installation base and lower technological cost. In this study, a piezoelectric energy harvesting device based on constant wave motion was investigated. This device can regenerate electricity in a constant turbulent flow in the middle of the sea. The components of the device are circuitry, a steel bar, an bimorph piezoelectric element and buoyancy elements. In addition, a multiphysical analysis coupled with the structure and piezoelectric elements was conducted to estimate the performance of the device. With this piezoelectric energy harvesting device, the displacement and electric power were analyzed.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.1-7
• /
• 2005

In vehicle door system, weatherstrip seals protect passengers form noise, dust, rain and wind out of the vehicle. The higher efficient a weatherstrip is, the more durable it is in contact between the door and body frame. In this study, nonlinear finite element(FE) analysis is performed to obtain cauchy-stresses, displacements and reaction forces of the weatherstrip. Mechanical properties of the weatherstrip is obtained by uniaxial tension test. The MARC which is a commercial software for the nonlinear analysis of a flexible FE model is used. Twenty-one cases of the FE model are developed by using Ogden-foam formulation. In the results of nonlinear FE analysis, the most valuable deformation of the weatherstrip occurred when displacement control value reaches 7.2mm. Severe deformation is observed as the displacement control value become more increased. When the weatherstrip is designed, it would be considered that the displacement value of the weatherstrip has to be less than 7.2mm.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.991-998
• /
• 1989

본 연구에서는 충돌각을 변수로 한 실험적 연구를 수행하기 위하여 여타의 변수를 고정하였으며, 유속은 R$_{e}$=5.2*$10^{4}$의 결과를 제시하였다.

• Wind and Structures
• /
• 제19권4호
• /
• pp.389-404
• /
• 2014

The flow characteristics of a circular cylinder surrounded by an outer permeable cylinder were experimentally investigated using Particle Image Velocimetry Technique in deep water flow. In order to consider the effects of diameter and porosity of the outer cylinder on flow structures of the inner cylinder, five different outer cylinder diameters (D=37.5, 52.5, 60, 75 and 90 mm) and eight different porosities (${\beta}$=0.4, 0.5, 0.6, 0.65, 0.7, 0.75, 0.8 and 0.85) were selected. During the experiments, the diameter of inner cylinder was kept constant as d=30 mm. The depth-averaged free-stream velocity was adjusted as U=0.156 m/s, which corresponds to the Reynolds number of Re=5000 based on the inner cylinder diameter. It has been concluded that both the outer permeable cylinder diameter and the porosity have important influences on the attenuation of vortex shedding in the wake region. The presence of outer permeable cylinder decreases the magnitude of Reynolds shear stress and turbulent kinetic energy compared to the bare cylinder case. Moreover, the spectral analysis of vortex shedding frequency has revealed that the dominant frequency of vortex shedding downstream of the cylinder arrangement also reduces substantially due to the weakened Karman shear layer instability.

• Wind and Structures
• /
• 제17권4호
• /
• pp.361-377
• /
• 2013

Wall functions have been widely used in computational fluid dynamics (CFD) simulations and can save significant computational costs compared to other near-wall flow treatment strategies. However, most of the existing wall functions were based on the asymptotic characteristics of near-wall flow quantities, which are inapplicable in complex and non-equilibrium flows. A modified wall function is thus derived in this study based on flow over a plate at zero-pressure gradient, instead of on the basis of asymptotic formulations. Turbulent kinetic energy generation ($G_P$), dissipation rate (${\varepsilon}$) and shear stress (${\tau}_{\omega}$) are composed together as the near-wall expressions. Performances of the modified wall function combined with the nonlinear realizable k-${\varepsilon}$ turbulence model are investigated in homogeneous equilibrium atmosphere boundary layer (ABL) and flow around a 6 m cube. The computational results and associated comparisons to available full-scale measurements show a clear improvement over the standard wall function, especially in reproducing the boundary layer flow. It is demonstrated through the two case studies that the modified wall function is indeed adaptive and can yield accurate prediction results, in spite of its simplicity.

• 비교문화연구
• /
• 제33권
• /
• pp.287-307
• /
• 2013

One cat caused a big wave in Russian literature. This cat revived the heroine of Russian classics. Her light breath was scattered in the world, in the cloudy sky and in the cold spring wind about one hundred years ago. And the cat gave an opportunity of turning to Russian classics to Russian readers. Thanks to this cat, a Russian dreamer changed his typical thinking, as well as many ordinary readers start to read works of creator of this wonderful cat. Pelevin accomplished these works with one cat, which he has made. Of course "Nika" is not only caused to make readers to return to Russian classics. I think, the cat and "Nika" are the symbols of writer's purpose in Russian literature. In this study the understanding of "Nika" is following the steps of realization of writer's purpose. In the second chapter it is analyzed to the textual relationship between "Nika" and "Light breath". Apart from existing analyses to be emphasized the succession of thematic aspect of two works as well. Existence of observers to each heroine stress this succession of thematic aspect of two works. In the third chapter it is analyzed the use of technique of mystification in "Nika". This intentional use of mystification has been demanded to read a "Nika" from another point of view(internal speculation of hero-narrator). The purpose of writer was to expose the cognitive error of a human being. I think this purpose was effectively explained by Pelevin's Buddhist world view which was introduced in his several works.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.844-851
• /
• 2018

In this study, the regression equation was suggested to predict of the shot ball velocity according to blade shapes based on discrete element (DE) analysis. First, the flat type blade DE model was used in the analysis, the validity of the DE model was verified by giving that the velocity of the shot ball almost equal to the theoretical one. Next, the DE analyses for curved and combined blade models was accomplished, and their analytical velocities of shot ball were compared with the theoretical one. The velocity of combined blade model was greatest. From this, the regression equation for velocity of shot ball according to the blade shape based on the DE analysis was derived. Additionally, the wind speed measurement experiment was carried out, and the experimental result and analytical one were the same. Ultimately, it was confirmed that the prediction method of the velocity of shot ball based on DE analysis was effective.

• Steel and Composite Structures
• /
• 제50권1호
• /
• pp.25-43
• /
• 2024

In this article, a mathematical model is developed to predict the dynamic behavior of bio-inspired composite beam with helicoidal orientation scheme under variable axial load using a unified higher order shear deformation beam theory. The geometrical kinematic relations of displacements are portrayed with higher parabolic shear deformation beam theory. Constitutive equation of composite beam is proposed based on plane stress problem. The variable axial load is distributed through the axial direction by constant, linear, and parabolic functions. The equations of motion and associated boundary conditions are derived in detail by Hamilton's principle. Using the differential quadrature method (DQM), the governing equations, which are integro-differential equations are discretized in spatial direction, then they are transformed into linear eigenvalue problems. The proposed model is verified with previous works available in literatures. Parametric analyses are developed to present the influence of axial load type, orthotropic ratio, slenderness ratio, lamination scheme, and boundary conditions on the natural frequencies of composite beam structures. The present enhanced model can be used especially in designing spacecrafts, naval, automotive, helicopter, the wind turbine, musical instruments, and civil structures subjected to the variable axial loads.