1 |
Bruneau, C.H. and Mortazavi, I. (2006), "Control of vortex shedding around a pipe section using a porous sheath", Int. J. Offshore Polar., 16(2), 1-7.
|
2 |
Akilli, H., Sahin, B. and Tumen, N.F. (2005), "Suppression of vortex shedding of circular cylinder in shallow water by a splitter plate", Flow Meas. Instrum., 16(4), 211-219.
DOI
ScienceOn
|
3 |
Akilli, H., Karakus, C., Akar, A., Sahin, B. and Tumen, N.F. (2008), "Control of vortex shedding of circular cylinder in shallow water flow using an attached splitter plate", J. Fluid Eng.-T ASME, 130(4), 1-11.
|
4 |
Akansu, Y.E. and Firat, E. (2010), "Control of flow around a square prism by slot jet injection from the rear surface", Exp. Therm. Fluid Sci., 34(7), 906-914.
DOI
|
5 |
Bhattacharyya, S., Dhinakaran, S. and Khalili, A. (2006), "Fluid motion around and through a porous cylinder", Chem. Eng. Sci., 61(13), 4451-4461.
DOI
|
6 |
Bhattacharyya, S. and Singh, A.K. (2011), "Reduction in drag and vortex shedding frequency through porous sheath around a circular cylinder", Int J. Numer. Meth. Fl., 65(6), 683-698.
DOI
ScienceOn
|
7 |
Cattafesta, L.N., Garg, S. and Shukla, D. (2001), "Development of piezoelectric actuators for active flow control", AIAA J., 39(8), 1562-1568.
DOI
|
8 |
Choi, H., Jean, W.P. and Kim, J. (2008), "Control of flow over a bluff body", Annu. Rev. Fluid Mech., 40, 113-139.
DOI
ScienceOn
|
9 |
Dol1, S.S., Kopp, G.A. and Martinuzzi, R.J. (2008), "The suppression of periodic vortex shedding from a rotating circular cylinder", J. Wind Eng. Ind. Aerod., 96(6-7), 1164-1184.
DOI
ScienceOn
|
10 |
Ekmekci, A. and Rockwell, D. (2010), "Effects of a geometrical surface disturbance on flow past a circular cylinder: a large-scale spanwise wire", J. Fluid Mech., 665, 120-157.
DOI
|
11 |
Gerrard, JH. (1966), "The mechanics of the formation region of vortices behind bluff bodies", J. Fluid Mech., 25, 401-413.
DOI
|
12 |
Feng, L.H. and Wang, J.J. (2010), "Circular cylinder vortex-synchronization control with a synthetic jet positioned at the rear stagnation point", J. Fluid Mech., 662, 232-259.
DOI
|
13 |
Fransson, J.H.M., Konieczny, P. and Alfredsson, P.H. (2004), "Flow around a porous cylinder subject to continuous suction or blowing", J. Fluid Struct., 19(8), 1031-1048.
DOI
|
14 |
Gad El Hak, M. (2007), Flow control: passive, active and reactive flow, Cambridge University Press, Cambridge, England.
|
15 |
Gozmen, B., Akilli, H. and Sahin, B. (2013), "Passive control of circular cylinder wake in shallow flow", Measurement, 46(3), 1125-1136.
DOI
|
16 |
Kleissl, K. and Georgakis, C.T. (2011), "Aerodynamic control of bridge cables through shape modification: A preliminary study", J. Fluid Struct., 27(7), 1006-1020.
DOI
|
17 |
Kuo, C.H. and Chen, C.C. (2009), "Passive control of wake flow by two small control cylinders at Reynolds number 80", J. Fluid Struct., 25(6), 1021-1028.
DOI
|
18 |
Lee, S.J., Lee, S.I. and Park, C.W. (2004), "Reducing the drag on a circular cylinder by upstream installation of a small control rod", Fluid Dyn. Res., 34(4), 233-250.
DOI
ScienceOn
|
19 |
Lee, S.J. and Lee, J.Y. (2008), "Piv measurements of the wake behind a rotationally oscillating circular cylinder", J. Fluid Struct., 24(1), 2-17.
DOI
ScienceOn
|
20 |
Lee, T. and Ko, L.S. (2009), "PIV investigation of flowfield behind perforated Gurney-type flaps", Exp. Fluids, 46(6), 1005-1019.
DOI
|
21 |
Li, Z., Navon, I.M., Hussaini, M.Y. and Le Dimet, F.X. (2003), "Optimal control of cylinder wakes via suction and blowing", Comput. Fluids, 32(2), 149-171.
DOI
|
22 |
Nakamura, Y. (1996), "Vortex shedding from bluff bodies with splitter plates", J. Fluid Struct., 10(2), 147-158.
DOI
|
23 |
Nakamura, H. and Igarshi, T. (2008), "Omnidirectional reductions in drag and fluctuating forces for a circular cylinder by attaching rings", J. Wind Eng. Ind. Aerod., 96(6-7), 887-899.
DOI
|
24 |
Lim, H.C. and Lee, S.J. (2004), "Flow control of a circular cylinder with O-rings", Fluid Dyn. Res., 35(2), 107-122.
DOI
ScienceOn
|
25 |
Min, C. and Choi, H. (1999), "Suboptimal feedback control of vortex shedding at low Reynolds number", J. Fluid Mech., 401, 123-156.
DOI
ScienceOn
|
26 |
Ozgoren, M., Pinar, E., Sahin, B. and Akilli, H. (2011), "Comparison of flow structures in the downstream region of a cylinder and sphere", Int. J. Heat Fluid Fl., 32(6), 1138-1146.
DOI
|
27 |
Ozkan, G.M., Oruc, V., Akilli, H. and Sahin, B. (2012), "Flow around a cylinder surrounded by a permeable cylinder in shallow water", Exp. Fluids, 53(6), 1751-1763.
DOI
|
28 |
Pinar, E., Ozkan, G.M., Akilli, H. and Sahin, B. (2011), "Flow control downstream of a circular cylinder via a surrounding perforated cylinder", Proceeding of the 6th Ankara International Aerospace Conference METU, Ankara, TURKEY, September.
|
29 |
Raffel, M., Willert, C.E. and Kompenhans, J. (1998), Particle image velocimetry a practical guide, Springer, Gottingen.
|
30 |
Sobera, M.P., Kleijn, C.R. and Van den Akker, H.E.A. (2006), "Subcritical flow past a circular cylinder surrounded by a porous layer", Phys. Fluids, 18(3), 038106.
DOI
|
31 |
Thompson, M., Hourigan, K. and Sheridan, J. (1996), "Three-dimensional Instabilities in the wake of a circular cylinder", Exp. Therm. Fluid Sci., 12(2), 190-196.
DOI
ScienceOn
|
32 |
Yucel, S.B., Cetiner, O. and Unal, M.F. (2010), "Interaction of circular cylinder wake with a short asymmetrically located downstream plate", Exp Fluids, 49(1), 241-255.
DOI
|
33 |
Unal, M.F. and Rockwell, D. (1988), "On vortex formation from a cylinder. Part 1: control by splitter-plate interference", J. Fluid Mech., 190, 513-529.
DOI
|
34 |
Wang, J.J., Zhang, P.F., Lu, S.F. and Wu, K. (2006), "Drag reduction of a circular cylinder using an upstream rod", Flow Turbul. Combust., 76(1), 83-101.
DOI
|
35 |
Willimson, C.H.K. (1996), "Vortex dynamics in the cylinder wake", Annu. Rev. Fluid. Mech., 28, 477-539.
DOI
ScienceOn
|