1 |
Architectural Institute of Japan (2004), AIJ recommendations for loads on buildings Tokyo, Japan: Architectural Institute of Japan.
|
2 |
Blocken, B. and Carmeliet, J. (2006), "The influence of the wind-blocking effect by a building on its wind-driven rain exposure", J. Wind Eng. Ind. Aerod., 94(2), 101-127.
DOI
ScienceOn
|
3 |
Castro, I.P. and Robins, A.G. (1977), "The flow around a surface-mounted cube in uniform and turbulent streams", J. Fluid Mech., 79(2), 307-335.
DOI
|
4 |
Craft, T.J. and Launder, B.E. (2001), "On the spreading mechanism of the three-dimensional turbulent wall jet", J. Fluid Mech., 435, 305-326.
|
5 |
Easom, G. (2000), Improved turbulence models for computational wind engineering, Ph.D Thesis, University of Nottingham.
|
6 |
Franke, J., Hirsch, C., Jensen, A.G., Krus, H.W., Schatzmann, M., Westbury, P.S., Miles, S.D., Wisse, J.A. and Wright, N.G. (2004), "Recommendations on the use of CFD in wind engineering", Proceedings of the International Conference on Urban Wind Engineering and Building Aerodynamics, (Ed. van Beeck JPAJ), COST Action C14, Impact of Wind and Storm on City Life Built Environment, von Karman Institute, Sint-Genesius-Rode, Belgium, May, 5 -7.
|
7 |
Franke, J. and Frank, W. (2005), "Numerical simulation of the flow across an asymmetric street intersection", (Eds. Naprstek, J. and Fischer, C.), Proceedings of the 4EACWE, Prague, Czech Republic, July 11-15.
|
8 |
Hargreaves, D.M. and Wright, N.G. (2007), "On the use of the k- model in commercial CFD software to model the neutral atmospheric boundary layer", J. Wind Eng. Ind. Aerod., 95, 355-369.
DOI
ScienceOn
|
9 |
Mathews, E.H. (1987), "Prediction of the wind-generated pressure distribution around buildings", J. Wind Eng. Ind. Aerod., 25, 219-228.
DOI
ScienceOn
|
10 |
Miles, S. and Westbury, P. (2003), Practical tools for wind engineering in the built environment, QNET-CFD Network Newsletter.
|
11 |
Murakami, S. (1998), "Overview of turbulence models applied in CWE-1997", J. Wind Eng. Ind. Aerod., 74-76, 1-24.
DOI
ScienceOn
|
12 |
Murakami, S. (2002), "Setting the scene: CFD and symposium overview", Wind Struct., 5( 2-4), 83-88.
DOI
ScienceOn
|
13 |
Pope, S.B. (1975), "A more general eddy-viscosity hypothesis", J. Fluid Mech., 72, 331-340
DOI
ScienceOn
|
14 |
Richards, P.J. and Hoxey, R.P. (1993), "Appropriate boundary conditions for computational wind engineering models using the model", J. Wind Eng. Ind. Aerod., 46-47, 145-153.
DOI
ScienceOn
|
15 |
Riddle, A., Carruthers, D., Sharpe, A., McHugh, C. and Stocker, J. (2004), "Comparisons between FLUENT and ADMS for atmospheric dispersion modeling", Atmos. Environ., 38(7), 1029-1038.
DOI
ScienceOn
|
16 |
Speziale, C.G., Sarkar S. and Gatski T.B. (1991), "Modelling the pressure-strain correlation of turbulence: an invariant dynamical systems approach", J. Fluid Mech., 227, 245-272
DOI
|
17 |
Walshe, J. (2003), CFD modelling of wind flow over complex and rough terrain, Ph.D. Thesis, University of Loughborough.
|
18 |
Yang, W. (2004), Numerical study on structural wind loads and response based on RANS technique, Ph.D Thesis, Tongji University.
|
19 |
Yang, W., Quan, Y., Jin, X., Tamura, Y. and Gu, M. (2008), "Influences of equilibrium atmosphere boundary layer and turbulence parameters on wind load distributions of low-rise buildings", J. Wind Eng. Ind. Aerod., 96(10-11), 2080-2092.
DOI
ScienceOn
|