• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.205-210
• /
• 2008

In recent years, the crisis of energy is growing seriously and also the contamination of ecology has been reverberated as international problem. The social concern about energy crisis has been growing for the last several years and also the interest in new and renewable energy has been increased. The probability of wind power resource over Saemangeum is reviewed with the data of Gunsan weather station. Through this study, it is cleared that the Saemangeum area has fluent wind power source to design the wind farm in Korea. According to calculation results, it is possible to predict the wind velocity density around the Saemangeum area using the shape factor as a parameter.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.12
• /
• pp.963-969
• /
• 2021

The wind data measured from local meteorological masts is used to evaluate wind speed distribution and energy production in the specified site for wind farm However, wind data measured from meteorological masts often contain missing information or insufficient desired height or data length, making it difficult to perform wind turbine control and performance simulation. Therefore, long-term continuous wind data is very important to assess the annual energy production and the capacity factor for wind turbines or wind farms. In addition, if seasonal influences are distinct, such as on the Korean Peninsula, wind data with seasonal characteristics should be considered. This study presents methodologies for generating synthetic wind that take into account fluctuations in both wind speed and direction using the hidden Markov model, which is a statistical method. The wind data for statistical processing are measured at Maldo island in the Kokunnsan-gundo, Jeonbuk Province using the Automatic Weather System (AWS) of the Korea Meteorological Administration. The synthetic wind generated using the hidden Markov model will be validated by comparing statistical variables, wind energy density, seasonal mean speed, and prevailing wind direction with measurement data.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.89-94
• /
• 2011

In this study, we measured the wind data as new and renewable energy resources and carried out the evaluation of uncertainty about these data with the authentic standards. These data collected at the 20 locations in korea. We carried out the processing and evaluation about these data with standards as ISO, GUM, and IEC. Whereby these data become standards data and the credibility are gained. These data include some information as direction, humidity, pressure, temperature, and energy density. The annual average of wind speed(in Hamo) was measured as 9.5m/s, then the uncertainty was evaluated as ${\pm}0.88m/s$. We judge the credibility of data by expression of reliability quantitatively. In additional, the standards data is able to approach anywhere and it will be used to support of related research and industry.

• Atmosphere
• /
• v.26 no.3
• /
• pp.373-386
• /
• 2016

The future variability of Wind Energy Density (WED) over the Korean Peninsula under RCP climate change scenario is projected using ensemble analysis. As for the projection of the future WED, changes between the historical period (1981~2005) and the future projection (2021~2050) are examined by analyzing annual and seasonal mean, and Coefficient of Variation (CV) of WED. The annual mean of WED in the future is expected to decrease compared to the past ones in RCP 4.5 and RCP 8.5 respectively. However, the CV is expected to increase in RCP 8.5. WEDs in spring and summer are expected to increase in both scenarios RCP 4.5 and RCP 8.5. In particular, it is predicted that the variation of CV for WED in winter is larger than other seasons. The time series of WED for three major wind farms in Korea exhibit a decrease trend over the future period (2021~2050) in Gochang for autumn, in Daegwanryeong for spring, and in Jeju for autumn. Through analyses of the relationship between changes in wind energy and pressure gradients, the fact that changes in pressure gradients would affect changes in WED is identified. Our results can be used as a background data for devising a plan to develop and operate wind farm over the Korean Peninsula.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.460-475
• /
• 2018

In the variable-speed wind energy system, to achieve maximum power point tracking (MPPT), the wind turbine should run close to its optimal angular speed according to the wind speed. Non-linear control methods that consider the dynamic behavior of wind speed are generally used to provide maximum power and improved efficiency. In this perspective, the mechanical power is estimated using Kalman filter. And then, from the estimated mechanical power, the wind speed is estimated with Newton-Raphson method to achieve maximum power without anemometer. However, the blade shape and air density get changed with time and the generator efficiency is also degraded. This results in incorrect estimation of wind speed and MPPT. It causes not only the power loss but also incorrect wind resource assessment of site. In this paper, the adaptive maximum power point tracking control algorithm for wind turbine system based on the estimation of wind speed is proposed. The proposed method applies correction factor to wind turbine system to have accurate wind speed estimation for exact MPPT. The proposed method is validated with numerical simulations and the results show an improved performance.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.820-826
• /
• 2014

It is well known that energy generated by a wind generator (WG) depends on the wind resources at the installation site. In other words, a WG installed in a high wind speed area can produce more energy than that in a low wind speed area. However, a WG installed at a low wind site can produce a similar amount of energy to that produced by a WG installed at a high wind site if the WG is designed with a rated wind speed corresponding to the mean wind speed of the site. In this paper, we investigated the power curve of a WG suitable for Korea's southwestern coast with a low mean wind speed to achieve a high capacity factor (CF). We collected the power curves of the 11 WGs of the 6 WG manufacturers. The probability density function of the wind speed on Korea's southwestern coast was modeled using the Weibull distribution. The annual energy production by the WG was calculated and then the CFs of all of the WGs were estimated and compared. The results indicated that the WG installed on the Korea's southwestern coast could obtain a CF higher than 40 % if it was designed with the lower rated speed corresponding to the mean wind speed at the installation site.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.382-383
• /
• 2018

To increase the efficiency of a wind energy conversion system (WECS), the maximum power point tracking (MPPT) algorithm is usually employed. This paper proposes an optimal MPPT algorithm which tracks a sudden wind speed change condition fast. The proposed method can be implemented without the prior information on the wind turbine parameters, generator parameters, air density or wind speed. By investigating the directions of changes of the mechanical output power in wind turbine and rotor speed of the generator, the proposed MPPT algorithm is able to determine an optimal speed to achieve the maximum power point. Then, this optimal speed is set to the reference of the speed control loop. As a result, the proposed MPPT algorithm forces the system to operate at the maximum power point by using a three-phase converter. The simulation results based on the PSIM are given to prove the effectiveness of the proposed method.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.63-72
• /
• 2005

In order to understand regional wind characteristics and to estimate offshore wind resources, a wind map of the Korean Peninsula was established using remote-sensing data from the satellite, U.S. NASA Quik SCAT which has been deployed for the Sea Winds Project since 1999. According to the linear regression result between the wind map data and in-situ marine-buoy data, the correlation factor was greatly improved up to 0.87 by blending the remote-sensing data of Quik SCAT with U.S. NCEP/NCAR CDAS reanalysis data to eliminate precipitation interference and to increase temporal resolution. It is found from the established wind map that the wind speed in winter is prominent temporally and the South Sea shows spatially high energy density over the wind class 6. The reason is deduced that the north-west winds through the Yellow Sea and the north-east winds through the East Sea derived by the low pressure developed in Japan are accelerated passing through the Korea Channel and formed high wind energy region in the South Sea; the same trends are confirmed from the statistical analysis of the meteorological observation data of KMA.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.4
• /
• pp.266-273
• /
• 2015

In this paper, annual wind data in 2014 at six locations(Seosudo, Gadaeam, Sibidongpa, Galmaeyeo, Haesuseo, Jigwido) are collected and analyzed in order to review optimal candidate site for offshore wind farm in the Western Seas of Korea. Observed wind data is fitted to Rayleigh and Weibull distribution and annual energy production is estimated according to wind frequency. GWE-3kH(3 kW-class) and GWE-10KU (10 kW-class) turbine are selected as wind turbine. Also, power curve are used to calculate wind energy potential. As a result, annual mean wind speed at six locations(Seosudo, Gadaeam, Sibidongpa, Galmaeyeo, Haesuseo, Jigwido) were calculated about 4.60, 4.5, 5.00, 5.13, 5.51, 5.90 m/s, respectively. In addition, annual energy production were estimated at 10,622.752, 11,313.05, 13,509.41, 14,899.55, 17,106.13, 19,660.85 kWh. Generally, annual mean energy density were between poor and marginal class and capacity factor at Jigwido was calculated at 22.44%. Its value is higher than the others.

• Wind and Structures
• /
• v.14 no.3
• /
• pp.253-283
• /
• 2011

This paper presents the field measurement results of wind effects on a super-tall building (CITIC Plaza, 391 m high) located in Guangzhou. The field data such as wind speed, wind direction and acceleration responses were simultaneously and continuously recorded from the tall building by a wind and vibration monitoring system during two typhoons. The typhoon-generated wind characteristics including turbulence intensity, gust factor, peak factor, turbulence integral length scale and power spectral density of fluctuating wind speed were presented and discussed. The dynamic characteristics of the tall building were determined based on the field measurements and compared with those calculated from a 3D finite element model of the building. The measured natural frequencies of the two fundamental sway modes of the building were found to be larger than those calculated. The damping ratios of the building were evaluated by the random decrement technique, which demonstrated amplitude-dependent characteristics. The field measured acceleration responses were compared with wind tunnel test results, which were found to be consistent with the model test data. Finally, the serviceability performance of the super-tall building was assessed based on the field measurement results.