• 한국수소및신에너지학회논문집
• /
• 제25권6호
• /
• pp.629-635
• /
• 2014

This paper presents annual energy production (AEP) by a 1.5kW wind turbine due to be installed in Deokjeok-Do island. Local wind data is determined by geometric shape of Deokjeok-Do island and annual wind data from Korea Institute of Energy Research at three places considered to be installed the wind turbine. Numerical simulation using WindSim is performed to obtain flow pattern for the whole island. The length of each computation grid is 40 m, and k-e turbulence model is imposed. AEP is determined by the power curve of the wind turbine and the local wind data obtained from numerical simulation. To capture the more detailed flow pattern at the specific local region, Urumsil-maul inside the island, fine mesh having the grid length of 10m is evaluated. It is noted that the input data for numerical simulation to the local region is used the wind data obtained by the numerical results for the whole island. From the numerical analysis, it is found that a local AEP at the Urumsil-maul has almost same value of 1.72 MWh regardless the grid resolutions used in the present calculation. It is noted that relatively fine mesh used for local region is effective to understand the flow pattern clearly.

• KIEAE Journal
• /
• 제15권1호
• /
• pp.155-160
• /
• 2015

The annual average of energy sources is continuously increasing at a rate of 5.8%, and particularly, the power generation proportion of new/renewable energy is increasing significantly. Furthermore, South Korea has established a national energy master plan for 2008-2030 and is aiming at obtaining approximately 11% of total energy production from the wind turbine sector. Although offshore wind turbines are similar to wind turbines installed on land, they require materials with excellent dynamic properties and durability to prevent damage due to seawater at the lower parts and connecting parts. The lower parts of wind turbines are submerged in seawater, and the upper and lower parts are connected by filling the connecting part with grout. This paper describes the test results of the process of determining the mix ratios to develop ultra-high grout for offshore wind turbines. There is virtually no relevant technology regarding grout for offshore wind turbines in South Korea that can be referenced for the process of determining the mix ratios. Therefore, tests were conducted for determining compression strength, elastic modulus, flexural strength, density, constructability (floor test), and early strength by referencing a high-performance grout produced in South Korea, and the mixing process for achieving the goal strengths was described using the Korean Industrial Standards (KS) as the reference.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.253-254
• /
• 1996

To understand the dynamical structures of stellar wind bubble, one and two-dimensional calculations has been performed. Using FCT Code with cooling effects and assuming constant mass loss rate and ambient medium density, we could divide stellar winds into the regime of slow and fast winds. The slow wind driven bubble shows initially radiative and becomes partially radiative bubble in which shocked stellar wind zone is still adiabatic. In contrast., the fast wind driven bubble shows initially fully adiabatic and becomes adiabatic bubbles with radiative outer shell. We also determine analytically the onset of thin-shell formation time in case of fast wind driven bubble with power-law energy injection and ambient density structure. We solve the line transfer problem with numerical results in order to calculate line profile of [OIII] forbidden line.

• 한국태양에너지학회 논문집
• /
• 제38권2호
• /
• pp.1-13
• /
• 2018

This paper deals with the NREL (National Renewable Energy Laboratory) 5-MW reference wind turbine. The controller which include MPPT (Maximum power point tracking) control algorithm and tower load reduction control algorithm was designed by MATLAB Simulink. This paper propose a tower damper algorithm to improve the existing tower damper algorithm. To improve the existing tower damper algorithm, proposed tower damper algorithm were applied the thrust sensitivity scheduling and PI control method. The thrust sensitivity scheduling was calculated by thrust force formula which include thrust coefficient table. Power and Tower root moment DEL (Damage Equivalent Load) was set as a performance index to verify the load reduction algorithm. The simulation were performed 600 seconds under the wind conditions of the NTM (Normal Turbulence Model), TI (Turbulence Intensity)16% and 12~25m/s average wind speed. The effect of the proposed tower damper algorithm is confirmed through PSD (Power Spectral Density). The proposed tower damper algorithm reduces the fore-aft moment DEL of the tower up to 6% than the existing tower damper algorithm.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.107-112
• /
• 2011

A comparison study between two performance testing results, one is on the site calibration not needed and the other is needed, was proceeded for the understanding on the effect of site calibration on the complex terrain. As a result, it is revealed that all of uncertainty components is effected by the topographical features dramatically. And the maximum difference of uncertainty reached at around 8% of rated capacity of wind turbine. So, the site calibration is an effective method to remove the variable wind effect by the ground complexity and must be proceeded before the power performance testing of a wind turbine.

• 한국환경과학회지
• /
• 제6권4호
• /
• pp.313-322
• /
• 1997

한국수영만에서 잔차류장의 운동 위치에너지의 계절변화를 연구하기 위하여 우리는 에너지의 수지를 계산하고 조석에너지와 비교했다. 위치에너지는 겨울과 봄철에 크며, 밀도성층이 형성된 여름과 초가을에 작게 나타났다. 잔차류의 운동에너지는 계절적인 변화를 보이고 있으며, 단위면 적당 잔차류의 평균 운동에너지는 6.4$\times$$10^{-4}ergs s^{-1}cm^{-}2$이다. 수영 만에서 잔차류장의 계절변동은 조석잔차류의 운동에너지가 밀도류나 취송류의 운동에너지보다 큰 11월을 제외하고는 밀도류가 지배하고 있다. 잔차류의 주성분인 조석잔차류, 취송류 및 밀도류의 운동에너지의 평균백분율은 잔차류의 운동에너지에 대하여 각각 29.1%, 3.4%, 67.5% 이다. 단위면적당 잔차류의 운동에너지, 위치에너지 및 조석에너지의 비는 각각 1.0 : 6.7$\times$$10^3$ : 8.2$\times$$10^4$ 이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.17-20
• /
• 2005

This paper presents an overview analysis on the observed wind shear at Pohang Steel Works, focusing on diurnal patterns and the frequency of high nighttime shear at the site in case of land breeze. In addition, this paper discusses the importance of accurate shear estimates for reliable evaluation of wind energy density. In order for a long-term correlation of the site, three Measure-Correlate-Predict methods were tested with Pohang wind data and it was shown that the linear MCP gives poor estimation due to the geographic characteristics of complex terrain where the severe transformation of wind direction was accompanied.

• 해양환경안전학회지
• /
• 제14권3호
• /
• pp.205-210
• /
• 2008

화석연료 사용으로 인한 환경오염 및 에너지원가 상승이 큰 문제로 대두되고 있는 현재의 상황을 타개하기 위한 하나의 방안으로 신 재생에너지에 대한 관심이 고조되고 있다. 특히 서해안에 위치하고 있는 새만금 지역은 광활한 면적과 서북서풍이라는 큰 장점을 가지고 있어 풍력발전의 적지로 예상된다. 본 연구는 이러한 예상을 뒷받침해 줄 수 있는 풍력자원을 조사한 것으로 군산지역의 평균풍속은 4 m/s 정도이며, 도서지방을 연계하는 해상풍력발전 단지의 최적지로 손색이 없음을 밝혔다. 또한, 풍력자원의 출현밀도를 판별하는 Weibull의 분포함수를 이용하여 계산하고, 형상계수를 매개변수로 하여 풍속밀도계산을 한 결과, 군산지방의 풍속출현을 예상할 수 있었다.

• 한국항공우주학회지
• /
• 제49권12호
• /
• pp.963-969
• /
• 2021

풍력발전단지 위치 선정에 있어 풍속 분포 및 발전량을 평가하기 위해 해당 지역의 기상 타워에서 계측된 바람 자료를 이용한다. 그러나 기상 타워에서 계측된 바람 자료는 종종 정보가 누락되거나 원하는 높이에 맞지 않거나, 혹은 데이터 길이가 충분하지 않아 풍력터빈 제어 및 성능 시뮬레이션 수행에 어려움을 겪게 된다. 따라서 풍력터빈 혹은 발전단지에 대한 연간 발전량 및 이용률을 평가하는데 원하는 높이에서 장기간의 연속적인 바람 자료는 매우 중요하다. 또한, 한반도와 같이 계절에 따른 풍향과 풍속 변동이 뚜렷한 경우에는 계절별 특징이 고려된 풍속과 풍향을 동반한 바람 자료를 고려해야 한다. 본 연구에서는 통계적 방법인 은닉 마르코프 모델을 이용하여 풍속과 풍향의 변동을 고려한 인공 바람을 생성하기 위한 방법을 제시한다. 통계처리를 위한 바람 자료는 전라북도 고군산군도에 있는 말도의 기상청 방재기상관측(AWS) 장비에서 계측된 자료를 사용한다. 은닉 마르코프 모델에 의해 생성된 인공 바람은 통계 변수, 풍력에너지밀도, 계절별 평균 풍속, 주 풍향 등을 계측 자료와 비교를 통해 검증하기로 한다.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.89-94
• /
• 2011

In this study, we measured the wind data as new and renewable energy resources and carried out the evaluation of uncertainty about these data with the authentic standards. These data collected at the 20 locations in korea. We carried out the processing and evaluation about these data with standards as ISO, GUM, and IEC. Whereby these data become standards data and the credibility are gained. These data include some information as direction, humidity, pressure, temperature, and energy density. The annual average of wind speed(in Hamo) was measured as 9.5m/s, then the uncertainty was evaluated as ${\pm}0.88m/s$. We judge the credibility of data by expression of reliability quantitatively. In additional, the standards data is able to approach anywhere and it will be used to support of related research and industry.