• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.11
• /
• pp.753-759
• /
• 2004

This paper presents a modeling and simulation of a fuzzy controller for maximum power extraction of a grid-connected wind energy conversion system with a link of a rectifier and an inverter. It discusses the maximum power control algorithm for a wind turbine and proposes, in a graphical form, the relationships of wind turbine output, rotor speed, power coefficient, tip-speed ratio with wind speed when the wind turbine is operated under the maximum power control. The control objective is to always extract maximum power from wind and transfer the power to the utility by controlling both the pitch angle of the wind turbine blades and the inverter firing angle. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation method. The simulation results performed on MATLAB will show the variation of generator's rotor angle and rotor speed, pitch angle, and generator output.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.852-857
• /
• 2010

As the wind has become one of the fastest growing renewable energy sources, the key issue of wind energy conversion systems is on how to efficiently operate the wind turbines in a wide range of wind speeds. In general, the wind speed is the main factor that impact on the dynamics of wind turbine system. Wind turbine algorithms are thus required to improve the performance of wind speed measurements. However, the accurate measurement of the effective wind speed using wind gauge and similar sensors is difficult such that control systems are needed for wind speed estimation using various techniques. Therefore, this research suggests the Maximum Power Point Tracking (MPPT) method for tracking the wind speed based on neural networks. Design experiments were carried out in laboratory environment to validate the application of the proposed method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.290-292
• /
• 2008

we applied Wind Field Module of PHRLM so that disaster prevention agency concerned can effectively estimate the possible strong wind damages by typhoon. In this study, therefore, we estimated wind speed at 300m level using 700hPa wind according to the research method by Franklin(2003), PHRLM(2003), and Vickery and Skerlj(2005). Then we calculated wind speed at 10m level using the estimated wind speed at 300m level, and finally, peak 3.second gust on surface. The case period is from 18LST August 31 to 03LST September 1, 2002, when the typhoon Rusa in 2002 was the most intense. Among disaster prediction models in the US, Wind Field Module of PHRLM in Florida was used for the 2002 typhoon Rusa case. As a result, peak 3.second gust on the surface increased $10\sim20%$ in the typhoon's 700hPa wind speed.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.846-848
• /
• 2000

In the early development of wind energy, the majority of wind turbines were operated at constant speed. Recently, the number of variable-speed wind turbines adopted pitch control apparatus has increased. This paper deal with a simulation of pitch control of variable-speed wind turbine and the response of pitch angle is traced in a given random wind speed.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.421-427
• /
• 2013

The dependence between wind speeds in multiple wind sites has a considerable impact on the reliability of power systems containing wind energy. This paper presents a new method to generate dependent wind speed time series (WSTS) based on copulas theory. The basic feature of the method lies in separating multivariate WSTS into dependence structure and univariate time series. The dependence structure is modeled through the use of copulas, which, unlike the cross-correlation matrix, give a complete description of the joint distribution. An autoregressive moving average (ARMA) model is applied to represent univariate time series of wind speed. The proposed model is illustrated using wind data from two sites in Canada. The IEEE Reliability Test System (IEEE-RTS) is used to examine the proposed model and the impact of wind speed dependence between different wind regimes on the generation system reliability. The results confirm that the wind speed dependence has a negative effect on the generation system reliability.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.5
• /
• pp.11-25
• /
• 2018

The Ln-least method is commonly used to estimate the Weibull parameters from the observed wind speed data. In previous studies, the bin method has been used to calculate the cumulative frequency distribution for the Ln-least method. The purpose of this study is to obtain better performance in the Ln-least method by applying probability plotting position(PPP) instead of the bin method. Two types of the wind speed data were used for the analysis. One was the observed wind speed data taken from three sites with different topographical conditions. The other was the virtual wind speed data which were statistically generated by a random variable with known Weibull parameters. Also, ten types of PPP formulas were applied which were Hazen, California, Weibull, Blom, Gringorten, Chegodayev, Cunnane, Tukey, Beard and Median. In addition, in order to suggest the most suitable PPP formula for estimating Weibull parameters, two accuracy tests, the root mean square error(RMSE) and $R^2$ tests, were performed. As a result, all of PPPs showed better performances than the bin method and the best PPP was the Hazen formula. In the RMSE test, compared with the bin method, the Hazen formula increased estimation performance by 38.2% for the observed wind speed data and by 37.0% for the virtual wind speed data. For the $R^2$ test, the Hazen formula improved the performance by 1.2% and 2.7%, respectively. In addition, the performance of the PPP depended on the frequency of low wind speeds and wind speed variability.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.8-22
• /
• 2011

Investigations on modeling methods of a CFD wind resource prediction program, WindSim for a ccurate predictions of wind speeds were performed with the field measurements. Meteorological Masts having heights of 40m and 50m were installed at two different sites in complex terrain. The wind speeds and direction were monitored from sensors installed on the masts and recorded for one year. Modeling parameters of WindSim input variables for accurate predictions of wind speeds were investigated by performing cross predictions of wind speeds at the masts using the measured data. Four parameters that most affect the wind speed prediction in WindSim including the size of a topographical map, cell sizes in x and y direction, height distribution factors, and the roughness lengths were studied to find out more suitable input parameters for better wind speed predictions. The parameters were then applied to WindSim to predict the wind speed of another location in complex terrain in Korea for validation. The predicted annual wind speeds were compared with the averaged measured data for one year from meteorological masts installed for this study, and the errors were within 6.9%. The results of the proposed practical study are believed to be very useful to give guidelines to wind engineers for more accurate prediction results and time-saving in predicting wind speed of complex terrain that will be used to predict annual energy production of a virtual wind farm in complex terrain.

• Journal of the Korean Geographical Society
• /
• v.47 no.3
• /
• pp.347-358
• /
• 2012

This study aimed to investigate the change of wind speed during winter and summer seasons for 50 years(1961-2010). It were analyzed the mean wind speed, maximum wind speed, windy days and storm days on January and August of 13 weather stations in South Korea. The mean wind speed was decreased in the coastal region(Busan, Jeju, Ulsan, Pohang) in winter and summer seasons. Also it was similar to windy day. The relationship between wind speed and mean temperature has negative correlation in winter season. The relationship is low in summer season. The number of windy day and storm day has negative relation with monthly mean temperature.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.4
• /
• pp.484-489
• /
• 2014

Three phase PWM(Pulse Width Modulation) converter of the small-scale wind power system is able to charge battery under the rated wind speed regions. However, it is impossible to control output power of converter at the over win speed region because back-EMF(Electro Motive Force) of PMSG(Permanent Magnet Synchronous Generator) is higher than the battery terminal voltage of PMSG is reduced. However, the cut-off wind speed exists although battery charging algorithm is implemented by flux weakening control method. Therefore, this paper performs analysis of other factors which affects limitation wind speed. The validity of the analysis are verified through simulation.

• Structural Engineering and Mechanics
• /
• v.6 no.5
• /
• pp.555-569
• /
• 1998

The reliability of antenna tower designed for a n-year design wind speed is determined by considering the variability of the strength of the component members and of the mean wind speed. For obtaining the n-year design wind speed, maximum annual wind speed is assumed to follow Gumbel Type-1 distribution. Following this distribution of the wind speed, the mean and standard deviation of stresses in each component member are worked out. The variability of the strength of members is defined by means of the nominal strength and a coefficient of variation. The probability of failure of the critical members of tower is determined by the first order second moment method (FOSM) of reliability analysis. Using the above method, the reliability against allowable stress failure of the critical members as well as the system reliabilities for a 75 m tall antenna tower, designed for n-year design wind speed, are presented.