• 한국전자통신학회논문지
• /
• 제8권8호
• /
• pp.1219-1226
• /
• 2013

본 연구는 위성통신 중계기의 L대역변환반의 PCB EM 분석을 하고, 불요파에 대한 취약 부분에 대해 최적화하였다. 위성중계기 안에는 L대역변환반 뿐만 아니라 전원반, 디지털신호처리반, TM/TC 제어반 등 다양한 기능 및 블록이 연동될 때 윈치 않는 신호 성분으로 인해 잡음성분이 증가되어 전체 시스템 성능 저하를 야기 시킬 수 있다. EM 시뮬레이션 툴을 사용한 PCB 공진해석은 보드 상에서 공진에 취약할 수 있는 부분에 대해 쉽게 분석을 할 수 있고, 다양한 시뮬레이션을 통해 최적의 설계를 할 수 있다. 또한 PCB에 포트를 설정하여 원하는 블록을 쉽게 분석할 수 있는 장점이 있다.

• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.653-658
• /
• 2013

For towing the new type armored vehicle and maintaining the close support, the armored recovery vehicle(ARV) with winch and crane has been developed. In case of crane, it is mainly used to salvage heavy objects by rotational and vertical motion. Especially, the crane bracket is very important parts due to fixing the ARV's body and rotary joint and preventing the force rotation of crane. Therefore, the crane bracket needs to have an enough strength to endure the high load and it is very important to analyze the stress distribution under loads. In the present work, the experimental and analytical investigation on structural integrity evaluation of crane bracket were carried out. The simulation of three-dimensional finite element method(FEM) was compared with experimental datum. From the numerical results, the FEM simulations corresponded well with th experimental results and the structural safety was confirmed by safety factor.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.585-593
• /
• 1996

According to the considerable increase of the length of belt conveyors, the dynamic analysis of systme becomes necessary to consider the variation of tensions and transient motion of components during starting and stopping of conveyor. The mathematical model of system is derived using the lumped parameter method. The input driving force is represented with two functions of time and pulley speed to count the characteristics of motor and fluid coupling. An example system was studied with 14 km in the distance of carrying. At head, it has two drivers and one gravity take-up and at tail ond driver and one power winch take-up. In the example, the transient tensions and responses, calculated using two cases of driving force, are mutually compared in starting mode. Also, the position of maximum tension and the braking force of take-up are obtained in stopping mode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.28-30
• /
• 2008

본 논문은 국내 실정에 적합한 초고압 가공 직류 송전(HVDC)선로 설계를 위해서 세계적으로 처음 시도되는 가변 기능을 지닌 Proto Type HVDC 실규모 시험선로의 설계와 구축에 대해 소개한다. 시험선로는 초고압 직류송전시 발생하는 이온의 흐름에 의한 이온전류 밀도, 대전 전압, 지표면 전계강도 등 이온류(Ion류(流))에 의한 전기환경장애 및 코로나 영향을 검토하여 환경 친화적 HVDC 송전선로 설계기준을 도출하는데 있다. 이에 따라 HVDC 실규모 시험선로는 요크, 특수 애자련, 특수 arm을 사용하여 철탑의 극간 배치, 도체 배치 변경 및 지상고 변경이 가능하도록 winch를 채용하여 절연설계 조건의 유동성, 환경, 지지물, 송전기자재, 경제성 및 운용의 효율성을 종합적으로 고려할 수 있도록 특수한 형태로 설계되었으며, 본 논문은 상용 가공 HVDC 송전방식의 적용에 앞서 현재의 상황을 고려한 가공 HVDC 실증시험을 수행하기 위한 시험선로의 설계 및 구축에 대하여 기술하였다.

• 한국항해항만학회지
• /
• 제34권4호
• /
• pp.281-286
• /
• 2010

A new concept of ocean transport system, called mobile harbor, was introduced as a feasibility study in Korea in 2009. Target of the mobile harbor is a short distance transport of containers with or without cargo handling cranes. Although the mobile harbor project has a lot of topics to deal with, this paper is to focus on only ship-to-ship stabilized mooring, which plays a key role in cargo handling. The ship-to-ship stabilized mooring system was developed and installed on board a barge of LOA 32m and breadth 12m. The dockside tests as sea test were carried out so as to ascertain whether the systems can work well to control the barge’s motion. The results of dockside test showed that the heave motion of the barge's motion can be reduced by more than 45%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.679-681
• /
• 2005

The materials for transmission line construction were transported by road which opened in mountainous areas until the mid 1990s, However, from the mid 1990s, as social interest in the environment standard increases, a cable way and helicopter transport methods of construction have been applied to minimize damage to the environment and to build an environmental friendly system. The current cable way method is a single cable way system which has a lower section base to load materials into a carriage and carry them to the tower construction site by use of an engine and a main rope. Then the carriage lowers itself via a slope between the tower construction site and the lower section base. The single cable way system has the demerits of site acquisition for the lower section base, forest felling when installing the wire rope, and it is not applicable to a even topology Also it has to be installed separately at each tower site. Accordingly, to carry materials without forest felling and regardless of slope, the chain cable way system was developed to provide materials for more than two towers consecutively by use of an engine carriage and winch.

• 한국항공우주학회지
• /
• 제36권11호
• /
• pp.1121-1125
• /
• 2008

본 논문에서는 소형 항공기 낙하시험을 위한 낙하 시험 장비 개발에 관한 연구를 수행하였다. 시험장비는 유압 액츄에이터를 이용하여 자동으로 시험체를 상승시키고 또 다른 유압 액츄에이터를 이용 자동으로 낙하시키며, 낙하시험시 안전성 확보를 위한 2중의 안전 장치를 적용하였다. 장비의 정적 안정성 확보를 위해 장비의 구조해석을 수행하였으며, 해석된 결과를 반영하여 시험 장비를 설계 제작을 하였다. 제작된 장비의 낙하 신뢰도 확보를 위해 마찰력 측정 시험 및 낙하속도 측정 시험을 실시하여 장비의 적합성을 확인 하였다.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.17-26
• /
• 2012

A coupled analysis of a floating crane barge with a crane wire and hanging structure is carried out in thetime domain. The motion analysis of the crane barge is based on the floating multi-body dynamics, and thecrane wire is modeled as a simple spring tension. The hanging structure is assumed to be a rigid body with 3 degree-of-freedom translational motion. In this study, numerical simulations were conducted at three different stages. First, the developed code was validated by comparing the time-domain motion response of a crane barge with the frequency-domain results. Then, a coupled analysis of a crane barge and simple structure hanging by the crane wire was performed using the present scheme. The motion response and wire tension from the present calculations are compared with the results of OrcaFlex. The agreement between the two sets of results isfairly good. Last, lowering simulations in regular and irregular waves were conducted considering buoyancy changes in the hanging structure. The effects of the wave conditions, structure's weight, wire length, and lowering speed on the wire tension are considered.

• Ocean Systems Engineering
• /
• 제1권2호
• /
• pp.157-169
• /
• 2011

To provide more rational design solutions at conceptual design level, axiomatic design method has been applied to solve critical part of a new engineering problem called Mobile Harbor. In the implementation, the Mobile Harbor, a functional harbor system that consists of a vessel with container crane approaches to a container ship anchored in the open sea and establishes a secure mooring between the two vessels to carry out loading and unloading of containers. For this moving harbor system to be able to operate successfully, a reliable and safe strategy to moor and maintain constant distance between the two vessels in winds and waves is required. The design process of automatic ship-to-ship mooring system to satisfy the requirements of establishing and maintaining secure mooring has been managed using axiomatic design principles. Properly defining and disseminating Functional Requirements, clarifying interface requirements between its subsystems, and identifying potential conflict, i.e. functional coupling, at the earliest stage of design as much as possible are all part of what need to be managed in a system design project. In this paper, we discuss the automatic docking system design project under the umbrella of KAIST mobile harbor project to illustrate how the Axiomatic Design process can facilitate design projects for a large and complex engineering system. The solidified design is presented as a result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.458-459
• /
• 2008

본 논문은 폭넓은 전기환경 실증연구가 가능한 실규모 HVDC 시험선로의 설계 및 구축에 대해 소개한다. 국내 실정에 적합한 초고압 가공 직류송전(HVDC)선로 설계를 위해서는 전기적인 환경 장애를 일으키지 않는 환경친화적인 설계 및 건설에 대한 대안이 마련되어야 한다. HVDC 선로의 전기적인 환경영향은 주로 (+)극과 (-)극에서 발생하는 이온의 흐름에 의한 이온전류 밀도, 대전전압, 지표면전계강도 등 이온류(Ion流)의 영향과 초고압 송전에 따른 코로나 영향에 대해 검토하는 것이다. HVDC 실규모 시험선로는 요크, 특수 애자련, 특수 arm을 사용하여 철탑의 극간 배치, 도체 배치 변경 및 지상고 변경이 가능하도록 winch를 채용하여 절연설계 조건의 유동성, 환경, 지지물, 송전기자재, 경제성 및 운용의 효율성을 종합적으로 고려할 수 있도록 특수한 형태로 설계하여 각종 전기환경 실증연구가 가능하며 국내 환경 특성에 적합한 최적 극배치 좌표 도출이 가능하도록 구축되었다. 본 논문은 상용 가공 HVDC 송전방식의 적용에 앞서 현재의 상황을 고려한 전기환경 실증 연구가 가능한 실규모 HVDC 시험선로의 설계 및 구축에 대하여 기술하였다.