• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.64-74
• /
• 1999

The driving characteristics of the 1 tube 2 chamber bent silkworm type dyeing machine are reported. This dyeing machine is a newly developed energy saving machine. In this study, the driving characteristics of the 1 tube 2 chamber bent silkworm type dyeing machine are examined. Specially the relationship between main body pressure and the electric current of the blower motor, the relationship between main body pressure and the air pressure of the blower nozzle, the effect of the air pressure of the blower on the running speed of the fabric, and the effect of main body temperature were discussed experimentally. Through the experimental data, the following results were obtained. 1. Blower motor electric current and blower nozzle air pressure increased as main body pressure increased due to the temperature increase of the main body. 2. The running speed of the fabric increased as blower nozzle air pressure increased. The difference in running speed between winch reel driving and no winch reel driving at a blower frequency of 60Hz was higher than that of 70Hz. 3. The electric current of the blower rioter and blower nozzle air pressure increased rapidly at the initial state. As the experimental time passed, the main body pressure increased slowly. as the main body temperature increased.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.15 no.2
• /
• pp.95-100
• /
• 1979

In fishing with the anchovy boat seine, it is required to haul up the bag net without injuring anchovy body. Not to injure anchovy body, the bag net is operated with 30 to 34 crews in the traditional method. With a view point of decreasing crews, the authors tried to operate the bag net with side drum winch and derrick boom. Side drum winch was installed beside the engine casing and it was operated by the main engine through the belt, pulley and bevel gear. The derrick boom, 7 meters long, was installed above the working deck which is located in the stern of the common boat seiner. Three single blocks are attached to the boom, each 2 meters apart from the top. A hook was attached to the free end of the block line for hooking up the bolch line which attached inside the bag net especially prepared for the purpose. The hauling end of the block line was induced to the side drum winch for hauling up the bag net. By using this mechanism, the bag net was hauled up with peeling the bag net just like in the traditional method. So the following results are found. (1) No injury of anchovy body was found in the process of hauling up. (2) The bag net can be operated by mere 14 crews. (3) Duration, spent in hauling up the bag net, was almost the same when the catch are a little amount, and less duration was needed by the experimented method than the traditional one when the catch are a large amount. the bag net. By using this mechanism, the bag net was hauled up with peeling the bag net just like in the traditional method. So the following results are found. (1) No injury of anchovy body was found in the process of hauling up. (2) The bag net can be operated by mere 14 crews. (3) Duration, spent in hauling up the bag net, was almost the same when the catch are a little amount, and less duration was needed by the experimented method than the traditional one when the catch are a large amount.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.574-581
• /
• 2019

The present study analyzed the productivity and cost of winching operations for evaluating the efficiency of a tractor-attached winch in a Pinus densiflora thinning site located in the Yangyang County of Gangwon-do. The mean yarding distance and mean timber volume were 29 m and 0.15 ㎥, respectively. In the 95 cycles of yarding operations, the uphill and downhill yarding operations constituted 51% and 49%, respectively, of the total yarding operations. The productivity of the uphill yarding operation was 2.28 ㎥/h, and the productivity of the downhill yarding operation was 1.89 ㎥/h. The findings of this study revealedthat productivity would increase by 0.5 ㎥/h when the rate of utilization of the machine is increased to 80% by reducing the operational delay time. The cost of the downhill yarding operation was 44,116 KRW/㎥, whereas that of the uphill yarding operation was 53,369 KRW/㎥. The difference in cost resulted from the difference in the number of yarding stems (stems/cycle). Furthermore, the results of the multiple linear regression equation developed for predicting the yarding operation times showed that productivity was significantly affected by working conditions such as yarding distance (m), the number of stems per cycle (stems/cycle), and the terrain slope (%) in the uphill and downhill yarding operations. Further research is required for developing an accurate prediction model equation according to a yarding direction.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.503-504
• /
• 2011

본 논문에서는 공연이나 영화 촬영에서 사람과 물건을 매달거나 스포츠 중계를 위해 카메라를 매달고서 고속 촬영하는 시스템에 적용되는 윈치 시스템을 소개하고 이때 사용되는 다축 윈치 시스템의 하드웨어 제작 및 제어를 서술한다.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.3
• /
• pp.724-732
• /
• 2013

The purpose of this study is to obtain a basic data on layout of the trawlers' bridge equipment. The task activities of bridge workers involved in the navigation and fishing operation were analyzed by link analysis methods. The results are as follows. It was found that the movement pattern and frequency of bridge workers are different accordance with the bridge work (navigation, casting net, towing net and hauling net). The central workstation of movement of the bridge workers was a radar workstation, a steering workstation and a trawl winch workstation in the bridge work. But the radar did not show up as the center of movement during the hauling net. Workstations related deeply to the central workstations of the movement on the bridge were as below. Radar workstation was related to a GPS plotter, a microphone location for external communication with VHF and MF/HF equipment and a steering in the case of the navigation, the steering, the GPS plotter and the net monitor in the case of the fishing operation. Steering workstation was related deeply to the GPS plotter, the radar in the case of the navigation, a speed controller, the GPS plotter, a fish finder, the net monitor and the microphone location in the case of the fishing operation. Trawl winch workstation showed deep relation with the GPS plotter and the speed control during the fishing operation. Through this study, it was found that Workstations related deeply to the central workstation of the movement of the bridge workers in accordance with the bridge work. The results of this study might be utilized as the basic data on the bridge layout to minimize the fatigue degree due to a physical movement of the bridge workers.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.2
• /
• pp.140-148
• /
• 2007

This paper describes on the real-time monitoring of dredging information for grab bucket dredger equipped with winch control sensors and differential global positioning system(DGPS) using electronic chart display and information system(ECDIS). The experiment was carried out at Gwangyang Hang and Gangwon-do Oho-ri on board M/V Kunwoong G-16. ECDIS system monitors consecutively the dredging's position, heading and shooting point of grab bucket in real-time through 3 DGPS attached to the top bridge of the dredger and crane frame. Dredging depth was measured by 2 up/down counter fitted with crane winch of the dredger. The depth and area of dredging in each shooting point of grab bucket are displayed in color band. The efficiency of its operation can be ensured by adjusting the tidal data in real-time and displaying the depth of dredging on the ECDIS monitor. The reliance for verification of dredging operation as well as supervision of dredging process was greatly enhanced by providing three-dimensional map with variation of dredging depth in real time. The results will contribute to establishing the system which can monitor and record the whole dredging operations in real-time as well as verify the result of dredging quantitatively.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.13-22
• /
• 2010

This paper describes tagline PD control for reduction of motion for the heavy cargo(load) suspended by a floating crane. The equations of motion are set up considering the 6-degree-of-freedom floating crane and the 6-degree-of-freedom load based on multi-body system dynamics. The tagline mechanism is applied to floating crane to control motion of the heavy cargo(load). The winch, mounted on the deck of floating crane, is used to control the tension of tagline. To generate control force, PD control algorithm is applied. Numerical simulation and experiment is executed to verify the tagline control mechanism. The numerical simulation and experiment shows that the tagline control mechanism reduces the motion of the load suspended by a floating crane.

• Journal of Animal Environmental Science
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2012

The study was conducted to investigate the effects of climate on indoor environment of a swine house with natural. This study was tested in the beef swine stall at Young-in, Kyung-ki do. The test was experimented for the effect of interior environment by the outdoor environment and the interior-pan. The results are as follows. 1. In test 1 ($T_{out}$ : $25.7^{\circ}C$, without fan), an indoor air flow pattern was showed that entered from sidewall winch-curtain to went out of a indoor by the ridge winch-curtain. And the velocity of a section of the center was measured two times as large as the velocity of the floor. It is the acceleration of the velocity by thermal buoyancy. And, the entered air was rapidly dissipated by flow energy. So that in the swain livestock with sidewall winch-curtain is effected by thermal buoyancy. And the air temperature of the indoor was distributed more higher as compared with the outdoor temperature. This result is caused by the sensible heat from swine and the ventilation is restricted. 2. In test 2 (($T_{out}$ : $25.7^{\circ}C$, with fan), the velocity of a section of the center was measured more higher as compared with the test 1. And the variance of air velocity was distributed higher as compared with the test 1. This result is showed dead region of air flow with a fan operation. And, the variance of gas density was distributed lower as compared with the test 1.

• Particle and aerosol research
• /
• v.9 no.4
• /
• pp.253-260
• /
• 2013

For a vertical atmospheric aerosol distribution measurement, a very compact and light particle sampling package is developed. This package includes a compact optical particle counter (Hy-OPC), a light and small condensation particle counter (Hy-CPC), sensors (GPS, wind velocity, temperature, humidity), and a communication and system control board. This package is attached to He balloon and the altitude is controlled by a winch. Using this system the vertical particle size distribution was measured. The test results showed that the ground base atmospheric particle measurement result may be a lot different from that high above the ground.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.877-880
• /
• 2009

수문의 개폐는 모터에 의한 회전이 권양기에서 감속 되고 증폭된 회전력이 랙에 의하여 직선 운동으로 바뀌어 회전 방향에 따라 상하로 움직여 열리고 닫히게 된다. 권양기는 상부 모터, 감속기, 메인 감속 장치, 동력 차단장치, 좌측 동력변환장치, 우측 동력 변환장치로 구성된다. 본 논문에서는 핀잭식 권양기의 최적 설계를 위하여 보조기어와 메인기어 트레인의 구조 해석, 진동해석 및 설계와 하중에 버틸 수 있는 상부구조물 몸체의 최적 설계를 통하여 설계변수를 확립한다.