• Journal of the Korean Ceramic Society
• /
• v.21 no.3
• /
• pp.245-252
• /
• 1984

Willemite phosphor is a good one having excellent luminescence efficiency that it;s emission wavelength is in the range of about 525 nm. The energy band gap of this willemite phosphor is about 4.1 eV. When the ratio of ZnO/SiO is 1.8 and Mncl in used as activator source the phosphor has the value of maximum luminescence efficiency. The characteristic of willemite phosphor is tendency of the dependence of temperature. The willemite which was fired with activator after being synthesized at initial firing without activator shows higher value of luminescence efficiency than willemite which was fired with activator in initial stage, When the concentration of activator is 1-1.5mol% it has its most favorite condition and the value of luminescence efficiency decreases according to increasement of activator concentration.

• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.401-404
• /
• 2008

Willemite ($Zn_2SiO_4$) are a wide range of applications such as a phosphor host and an important crystalline phase in glass ceramics, electrical insulators, glazes, and pigments. In this study, Willemite precursors were synthesized with zinc silicate gels from mixture of zinc nitrate solution and various sodium silicate solution by the geopolymer technique. To examine the crystallization behavior, precursors were have been monitored by the XRD. A pure willemite phase was obtained at $900^{\circ}C$. TEM investigations revealed that the sample with 50 nm particle size was obtained via heat-treated at $900^{\circ}C$ for W-3.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.57-62
• /
• 2007

Willemite green phosphor powders have been prepared by the metallo-organic decomposition (MOD) method, and the photoluminescence and phase formation were studied as a function of both the firing temperature ($800{\sim}1100^{\circ}C$) and the concentration of Mn activator ($4{\sim}12 mol%$). Under 254 nm excitation source, the emission intensity of the phosphors increased with increasing the firing temperature from 800 to $1000^{\circ}C$. From the XRD analysis, the powders heat-treated above $1000^{\circ}C$ showed willemite crystal structure. The maximum emission intensity was obtained far the phosphors heat-treated at $1000^{\circ}C$ with 8 mol% of Mn content. The concentration quenching was occurred when the Mn concentration exceeded 10 mol%. The phosphor particles showed spherical shapes with the average size of $0.4{\sim}0.5{\mu}m$ by the SEM morphology.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.4
• /
• pp.154-161
• /
• 2017

$Zn_2TiO_4$, which is a progenitor of zinc crystallization, plays a significant role in controlling the crystallization of willemite ($Zn_2SiO_4$) in forming glaze at low temperatures. Thus, $Zn_2TiO_4$ was used to formulate stable willemite and to gain structural control. When synthesized 15 wt% of $Zn_2TiO_4$ is added to engobe and then applied, it can manipulate its crystallization and location. Additionally, when colorant is added to $Zn_2TiO_4$ and then applied to engobe, the mixture's colorant effect can be shown at crystallization. Certain characteristics of synthesized $Zn_2TiO_4$ enable various engobes to be applied to clay bodies. With a single glazing, the crystallization, location, and color of the crystals can be discretionarily regulated.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.1
• /
• pp.34-41
• /
• 2017

In this study, the effect on the zinc nuclei crystallization caused by changes preprocessing of the zinc crystalline glaze preparation has been studied. The mechanism of the nuclei formation in the crystalline glaze and development of the nuclei by studying the preprocessing step was explained. The preprocessing step was improved by altering mixing process of the materials prior to sintering: number of sieving dispersion process and ultra-sonication prove tests with various duration of sonication. According to the result, the sieving and sonication of the starting materials facilitated the interface reactions of $ZnO-SiO_2$ from $680^{\circ}C$ where low temperature willemite is formulated, and altered Si bonding for the easier bonding between Zn-Si. In other words, solely sieving was enough to accelerate the formation of willemite in low temperature. When the particles were distributed evenly by sonication, the willemite formation was even more significant.

• Journal of the Korean Ceramic Society
• /
• v.28 no.1
• /
• pp.74-78
• /
• 1991

Willemite powders which have been prepared by solid state reaction were easy to intermixed impurities, and particle surfaces were demaged in the progress of crushing. The above defacts were easy to accompany non-crystallization for mechanochemical effects and luminescence efficiency was deteriorated. The goal of this study improve each of defacts, and synthesize high purity and fine Mn doped willemite powders by wet and hydrothermal methods without crushing progress. It has been experimentally verified that the single phase Zn1.98Mn0.02SiO4 willemite powders which prepared by hydrothermal synthes is at 220$^{\circ}C$ for 10 hours in 2N KOH solution. The products are like needle and composition is the same with starting composition.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.598-602
• /
• 2010

When metal oxides are added into crystalline glaze, colors of glaze and crystals are similar as colorants generally. But the case of NiO in zinc crystalline glaze is different from general color development. When NiO is added to zinc crystalline glaze it can develop two or three colors. The active use of color development mechanism by adding NiO to the zinc crystalline glaze to control color of the base glaze and crystal with stability is investigated. This report is expected to contribute to the ceramic industry in improving application of zinc crystalline glaze. For the experiment of NiO, the quantity of NiO additives is changed to the base glaze for the most adequate formation of willemite crystal from previous research and firing condition: temperature increasing speed $5^{\circ}C/min$, holding 1 h at $1270^{\circ}C$, annealing speed $3^{\circ}C/min$ till $1170^{\circ}C$, holding 2 h at $1170^{\circ}C$ then naturally annealed. The samples are characterized by X-ray diffraction (XRD), UV-vis, and Micro-Raman. The result of the procedure as follows; Ni substitutes for Zn ion then glaze develops blue willemite crystals, as if cobalt is used, on brown glaze base. When NiO quantity is increased to over 5 wt%, willemite size is decreased, and the density of the crystal is increased, at the same time $Ni_2SiO_4$ (olivine) phase, the second phase, has been developed. The excessive NiO is reacted with silicate in the glass then developed green $Ni_2SiO_4$ (olivine), and quantity of $Ni_2SiO_4$ (olivine) is increased as quantity of willemite is decreased. It is proved to create three colors, blue, brown and green by controlling the quantity of NiO to the zinc crystalline glaze and it will improve the multiple use of colors to the ceramic design.

• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.134-140
• /
• 2011

To study the effect of color development of Ni-doped willemite blue pigments, five batches of compositions were prepared and fired at $1350^{\circ}C$/hold for 1 h. When Ni was substituted for ZnO by 0.03 mole the optimum result were obtained. Then they were fired at $1300^{\circ}C$ and held for 1, 2, 4 and 6 h respectively for the purpose sake. XRD, Raman spectroscopy, FT-IR, UV-vis were used to analyze the results of experiment. The substitution of 0.03mole Ni for Zn was most optimum and which produced good willemite at the temperature of $1300^{\circ}C$, holding for 6 h. In ceramic arts, cobalt has been used for blue coloring, in most cases, despite of its high cost. If the low cost Ni-doped willemite blue pigments supplies for them with stable and multiple shades of blue pigment, using NiO at high temperature, it would provide various blues for ceramic wares.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.2
• /
• pp.70-76
• /
• 2014

$Zn_2TiO_4$, using an anatase form of $TiO_2$ on zinc crystalline glaze, was shown as effective nuclear agent. Thus the effects on glaze were studied with synthesized $Zn_2TiO_4$ at low temperature. First, the chromophore elements were employed in synthesized $Zn_2TiO_4$ then add them in the zinc crystalline glaze. Crystal creation and development of color by $Zn_2TiO_4$ addition on the zinc crystalline glaze were more effective. Addition of $Zn_2TiO_4$, which is developed in low range temperature, is effected as zinc crystalline nuclear in the willemite glaze. When 5 wt% of synthesized $Zn_2TiO_4$ was added to the willemite glaze, nuclear creation increases and steadily retains. Therefore addition of respectively doped $Zn_2TiO_4$ with CoO, NiO, and CuO would increase doped effects in the glaze, various color willemite crystal were obtained.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.240-246
• /
• 2021

In the ceramic industry, a drastic decrease in crystalline formation was found even among the glazes well known for their high crystalline productivity when the ceramic glaze was stored in wet conditions over a period. This study aimed to investigate the reason for decreasing willemite crystals during storage. As the starting materials ZnO, calcined ZnO and frit 3110 are selected; the composition for zinc crystalline glazes was set through a three-component system with the materials. The firing condition was used from previous studies. The study was observed how wet conditions affected the crystallization of zinc crystalline glazes from a day to 24 weeks. The results were obtained by particle size analysis, XRD, Raman spectroscopy and SEM analysis. The results indicated that ZnO is advantageous in terms of willemite crystalline development and growth; however, Zn(OH)₂ cluster, formed by the reaction with water during the storage, caused the decrease in ZnO level in the glaze. The reduction of ZnO in the glaze eventually interfered the willemite development and growth.