• The Journal of the Acoustical Society of Korea
• /
• v.8 no.4
• /
• pp.53-59
• /
• 1989

A new proposed method can separate heart sounds and lung sounds by the realization of adaptive noise canceler using adaptive lattice Wiener filter in contrast to adaptive transversal LMS filter and high pass filter as before. Lung sounds and ECG signal are detected for this purpose, and especially the second heart sounds are reduced by finding T wave location with a T wave seeking algorithm. As a result, for heart sounds reduction It was found that adaptive transversal LMS filter required 100-200's orders, 75-100's orders In adaptive transversal MLMS filter, and only 10-20's orders in adaptive lattice Wiener filter. Adaptive filtering technique has shown greater accuracy than high pass filtering without loss of low frequency component.

• Journal of Broadcast Engineering
• /
• v.15 no.5
• /
• pp.617-630
• /
• 2010

At 37th VCEG meeting in Jan. 2009, Toshiba proposed Quadtree-based Adaptive Loop Filter (QALF). The basic concept of QALF is to apply Wiener filter to decoded image after the conventional deblocking filter and to represent the filter on/off flag data for each basic filtering unit in a more efficient way of quadtree structure. QALF could enhance the compression performance of around more than 9%, but the structure of one filter for a decoded frame leaves room for further improvement in the sense that optimal filter for one region of a frame could quite different from the optimal filter for other parts of a picture. This paper proposes multiple adaptive loop filters for better utilization of local characteristics of decoded frame to optimize the region-based Wiener filters. Additional filters, proposed in this paper, cover separate spatial area of each decoded frame according to the performance of previously designed filter(s) to provide the flexibility of rate-distortion based selection of the number of filters.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.104-111
• /
• 2008

The ECG is biomedical electrical signal occurring on the surface of the body due to the contraction and relaxation of the heart. This signal represents an extremely important measure for health monitoring, as it provides vital information about a patient's cardiac condition and general health. ECG signals are contaminated with high frequency noise such as power line interference, muscle artifact and low frequency nose such as motion artifact. But it is difficult to filter nose from ECG signal, and errors resulting from filtering can distort a ECG signal. The present study implemented a small-size and low-power ECG measurement system that can remove motion artifact for convenient health monitoring during daily life. The implemented ECG monitoring system consists of ECG amplifier, a low power microprocessor, bluetooth module and monitoring program. Amplifier was designed and implemented using low power instrumentation amplifier, and microprocessor was interfaced to the ECG amplifier to collect the data, process, store and feed to a transmitter. And bluetooth module used to wirelessly transmit and receive the vital sign data from the microprocessor to an PC at the receiving site. In order to evaluate the performance of the implemented system, we assessed motion artifact rejection performance in each situation with artificially set condition using adaptive filter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.261-269
• /
• 2013

In this paper, the evoked potential(EP) was represented by additive delay model to comply with the variational noisy response of stimulus-event synchronization. The hybrid method of delay compensated-Wiener filtered-ensemble averaging(DWEA) was proposed to enhance the EP signal distortion occurred during averaging procedure due to synchronization timing mismatch. The performance of DWEA has been tested by surrogated simulation, which is composed of synthesized arbitrary delay and arbitrary level of added noise. The performance of DWEA is better than those of Wiener filtered-ensemble averaging and of conventional ensemble averaging. DWEA is endurable up to added noise gain of 7 for 10 % mean square error limit. Throughout the experimentation observation, it has been demonstrated that DWEA can be applied to enhance the evoked potential having the synchronization mismatch with added noise.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.8
• /
• pp.2866-2880
• /
• 2014

We propose a video denoising method based on Kalman filter to reduce the noise in video sequences. Firstly, with the strong spatiotemporal correlations of neighboring frames, motion estimation is performed on video frames consisting of previous denoised frames and current noisy frame based on intensity and structure tensor. The current noisy frame is processed in temporal domain by using motion estimation result as the parameter in the Kalman filter, while it is also processed in spatial domain using the Wiener filter. Finally, by weighting the denoised frames from the Kalman and the Wiener filtering, a satisfactory result can be obtained. Experimental results show that the performance of our proposed method is competitive when compared with state-of-the-art video denoising algorithms based on both peak signal-to-noise-ratio and structural similarity evaluations.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.163-167
• /
• 2002

This paper propose the new spatially adaptive wavelet thresholding for image denosing. The method of wavelet thresholding for denosing, has been concentrated on finding the best uniform threshold or best basis. However, not much has been done to make this method adaptive to spatially changing statistics which is typical of a large class of images. Experimental results show that the proposed method outperforms level dependent thresholding techniques and is comparable to spatial Wiener filtering method in matlab.

• Electronics and Telecommunications Trends
• /
• v.21 no.6 s.102
• /
• pp.124-132
• /
• 2006

무선 통신 시스템에서 다중 경로 감쇠로 인한 심볼의 크기와 위상의 왜곡이 일어나는데 이를 추정하여 보상하기 위해 채널 추정 기법이 사용된다. OFDM 시스템에서의 채널 추정 기법에는 훈련 심볼이나 파일럿을 사용하여 채널을 추정하는 기법과 파일럿을 사용하지 않는 Blind 채널 추정 기법 등이 있다. 본 고에서는 I장 개요에 이어 II장에서는 훈련 심볼을 이용한 채널 추정 기법을 WPAN과 WLAN을 예로 들어 설명하고 LS,1-D LMMSE, Low rank LMMSE 알고리듬에 대해 설명한다. III장에서는 PSAM 채널추정에 대해 1차원 PSAM 기법과 2차원 파일럿 패턴과 Wiener filtering을 이용한 2-D LMMSE, Low rank LMMSE, Separable Wiener filter에 대하여 설명한다. IV장에서는 ESAE와 Blind 채널 추정 기법을 간략히 소개하고, V장에서 채널 추정의 최신 연구 동향을 소개한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.188-190
• /
• 2012

Compressed Sensing (CS) has been developed for several years. Among many CS algorithms for image, the Block-based Compressed Sensing with Smoothed Projected Landweber (BCS-SPL) demonstrates its excellent performance in low-complexity and near-optimal reconstruction. Several noise filtering algorithms of image reconstruction have been introduced such as the Wiener or the median filters, etc. In general, each filter has its own advantages and disadvantages depending on specific coding scheme. In this paper, we show that reconstruction performance can be varied according to the choice of filter. When a sub-rate value is changed, different filter causes different effect as well. Concerning the sub-rate, an inner filter can be chosen to improve the reconstructed image quality.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.1-2
• /
• 2023

본 연구는 환경 요인이 통제되어 있는 실험실 데이터에 산업 현장에서 발생하는 유사 잡음을 노이즈로 추가하였을 때, SNR비에 따른 노이즈별 STFT Log Spectrogram, Mel-Spectrogram, CWT Spectrogram 총 3가지의 이미지를 생성하고, 각 이미지를 입력으로 한 CNN 결함 분류 모델의 성능 결과를 확인하였다. 원본 데이터의 영향력이 큰 0db 이상의 SNR비로 합성할 경우 원본 데이터와 분류 결과상 큰 차이가 존재하지 않았으며, 노이즈 데이터의 영향이 큰 0db 이하의 SNR비로 합성할 경우, -20db의 STFT 이미지 기준 약 26%의 성능 저하가 발생하였다. 또한, Wiener Filtering을 통한 디노이징 처리 이후, 노이즈를 효과적으로 제거하여 분류 성능의 결과가 높아지는 점을 확인하였다.

• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.455-462
• /
• 2013

This paper introduces the Spatially Preprocessed Speech Distortion Weighted Multi-channel Wiener Filter (SP-SDW-MWF) for multi-microphone noise reduction and proposes a method to determine the speech distortion weights. The SP-SDW-MWF is known as a robust noise reduction algorithm against the error caused by the mismatch in microphones. The SP-SDW-MWF adopts weights which determine the amount of noise reduction at the expense of introducing speech distortion in the noise-suppressed speech. In this paper, we use the error of power spectral density between the estimated signal and the desired signal as the evaluation measure. Thus the a priori SNR is used to control the speech distortion weights in the frequency domain. In the experimental results, the proposed method yields better result in terms of MFCC distortion compared to the conventional method.