• Structural Engineering and Mechanics
• /
• v.31 no.6
• /
• pp.679-696
• /
• 2009

The paper aims at analyzing the stress distribution around an underground opening that is subjected to non-symmetrical surface loading with emphasis on opening shapes with sharp corners and the stress concentrations developed at these locations. The analysis is performed utilizing the BIE method coupled with the Neumann's series. In order to implement this approach, the special recurrent relations for half plane were proven and the modified Shanks transform was incorporated to accelerate the series convergence. To demonstrate the capability of the developed approach, a horseshoe shape opening with sharp corners was investigated and the location and magnitude of the maximum hoop stress was calculated. The dependence of the maximum hoop stress location on the parameters of the surface loading (degree of asymmetry, size of loaded area) and of the opening (the opening height) was studied. It was found that the absolute magnitude of the maximum hoop stress (for all possible surface loading locations) is developed at the roof points when the opening height/width ratio is relatively large or when the pressure loading area is relatively narrow (compared to the roof arch radius), and contrarily, when the opening height/width ratio is relatively small or when the surface pressure is applied to a relatively wide area, the absolute magnitude of the maximum hoop stress is developed at the bottom sharp corner points.

• Journal of Animal Environmental Science
• /
• v.5 no.2
• /
• pp.93-100
• /
• 1999

Pig's original image data was transformed to a binary image, an image excluding head and tail portion from the whole binary image, and a projected image associated with pig's height. Then the length of body, width of shoulder, and area of pig were calculated and the relationships among the above characteristics and pig's weight were analyzed. The results obtained from this study were as follows: 1. Whole binary image data was considered to be improper to determine the pig's weight because the movement of pig's head and tail portion affected the image data. 2. Binary image data excluding head and tail portion from the whole binary image showed a better estimation of the pig's weight than the whole binary image. 3. Pig's should width was analyzed to be improper factor to determine the pig's weight. 4. The projected image associated with pig's height showed the highest correlation between the pig's area of the image and pig's weight(R2=0.9965). From this research the projected image associated with pig's height, which is excluding head and tail portion from the whole body of pig's image, was considered to be the prime factor to measure the pig's weight by the noncontact measurement.

• Journal of the Korean Society of Costume
• /
• v.51 no.1
• /
• pp.87-96
• /
• 2001

This study, dealing with obese bodily figures from the viewpoint of garment shape, was conducted with obese male children of late school ages(nine to eleven years old) to provide data for making ready-made clothing for obese children by directly measuring and analysing the bodily figure of the upper body of them. The results of the study are summarized as follows. 1. According to the basic statistics, for most of obese children the values of the measuring items by ages appeared to be large, and the results of comparison with the National Anthropometric Survey of Korea made in 1997 showed that the values were more large than those of standard physical conditions. 2. It was shown that in the correlation between items the upper breast circumference had a high correlation with all items, and the weight did with the following items such as circumference, height, width and thickness. 3. The results of the principal component analysis showed that six main components hand an explainable power of more than 75.60% for all materials. The first factor was thickness and obesity of the upper body, the second one the height, the third one the length of front and rear sides, the fourth one the width of neck, the fifth one the length of shoulder, and the sixth one the breast width and the wrist circumference.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.4
• /
• pp.77-87
• /
• 2017

In this study, we investigated the physical form of planting foundation of the parks and green spaces in the waterside of Korea and classified them into groups showing common features. It was clssified into 7 kinds of parks and green spaces of 27 waterside parks in Korea including landscape, ecology, art, shields, site boundaries, windbreaks, and soundproofing. As a result, the study was carried out on the detailed type and size estimation through the sampling survey of planting foundation of landscape and ecological type mounding which can be statistically analyzed. Landscape and ecological mounding have the characteristics of securing the ecological stability of the waterside planting areas and the diversity of planting landscape. It is possible to create a green landscape through various terrain changes such as enclosing, focusing, and panoramic view. The physical characteristics of ecological and landscape type mounding can be expressed as height, width, and length And physical data can appear in various forms and sizes depending on the purpose and function of the buffer effect of the land use in the waterside planting areas, the landscape creation, the ecological buffer. In this study, the range of the physical scale for landscape and ecological mounding of waterside parks and green spaces was calculated. The range of the mounding height was analyzed to be less than 1.25m and more than 1.25m and the average height was 0.74~1.08m and 1.75~2.75m respectively. In addition, the range of width of mounding was less than 6.13m, 6.13~17.5m, and more than 17.5m, and the average width of each was 3.45~4.95m, 7.05~10.85m and 31.54~51.54m respectively. The range for the length of mounding was less than 50m, 50~500m, and more than 500m. The mean length of each mounding was 34.0m, 116.3m and 955.8m. It is difficult to distinguish the difference between the waterside planting areas and the urban greenery in the purpose and function of landscape and ecological mounding. However, considering the average distance of 60m from the waterside and the average height of 1.26m, we can conclud that opened planting foundation is prefered to high mounding designs in waterside planting areas. It is expected that the results presented for the improvement of the logical and spatial value of the waterside parks and green areas planting foundation design can be served as the basic data helpful for practical application in landscape architecture planning and design.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.123-129
• /
• 2013

Among various manual materials handling tasks, pushing/pulling was known to be one of the risk factors for the low back and shoulder musculoskeletal disorders (MSDs). This study was conducted to find out an optimal solution set of the handle height and distance for 4-wheel cart with two vertical handles. Ten male college students participated in the pushing force measurement experiment. The face-centered cube design, one of the central composite designs, was applied for the experiment, and the isometric voluntary pushing force was measured in 9 treatment conditions. The second order response surface model was predicted by using the pushing strength as a response variable, and the handle height and distance as independent factors. According to the 2nd order response model, the handle height and distance showed nonlinear relationship with the isometric pushing strength. To maximize the 2nd order response model (pushing force), the handle height and distance were optimized. The optimal handle height was 'xyphoid process height - stature', and the optimal handle distance was '$1.25{\times}shoulder$ width'. When calculated using the anthropometric data of the subjects of this study, the optimal handle height was $115.4{\pm}3.4$ cm, slightly higher than the elbow height, and the handle distance was $52.9{\pm}2.3$ cm.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.20-21
• /
• 2019

The Joint Video Experts Team (JVET) has been working on the development of next generation of video coding standard called Versatile Video Coding (VVC). Position Dependent Intra Prediction Combination (PDPC) which is one of the major tools for intra prediction refines the prediction through a linear combination between the reconstructed samples and the predicted samples according to the sample position. In VVC WD6, nScale which is shift value that adjusts the weight is determined by the width and height of the current block. It may cause that PDPC is applied to regions that do not fit the characteristics of the current intra prediction mode. In this paper, we define nScale for each width and height so that the weight can be applied independently to the left and top reference samples, respectively. Experimental results show that, compared to VTM 6.0, the proposed method gives -0.01%, -0.04% and 0.01% Bjotegaard-Delta (BD)-rate performance, for Y, Cb, and Cr components, respectively, in All-Intra (AI) configuration.

• KIEAE Journal
• /
• v.2 no.3
• /
• pp.33-38
• /
• 2002

The intermediate range of temperatures($100{\sim}300^{\circ}C$) which can be achieved with CPCs(Compound Parabolic Concentrators) without tracking device provides both economic and thermal advantages for solar collector design. The present paper summarizes critical design considerations for CPC with cylindrical absorber and its optical performance using ray tracing program. Concentration ratios vary as acceptance half angle, ratio of reflector height to aperture width and ratio of reflector area to aperture area. This effects showed that the concentration ratio was increased as acceptance angle but optimum ratio of reflector height to aperture width existed at critical value. As a result of ray tracing, solar ray losses was maximized at acceptance half angle and this problem was solved by increasing absorber tube diameter. The concentrating flux distribution on the absorber surface was uniform but peak flux existed.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.3-11
• /
• 1984

In order to obtain the basic information for the successful breeding of aromatic tobacco (Nicotiana tabacum L.), the heterosis, combining ability and gene distributions in 28 Fl hybrids by diallel crosses between Korea local and Oriental varieties were investigated. The yield were higher, stalk height, leaf length and leaf width were larger and days to flower was shorter for the Fl hybrids when compared to mid-parent. Estimates of general combining ability were significant for all characters investigated, and specific combining ability were significant for yield, stalk height, leaves Per Plant, leaf width and days to flower. In vr-wr graph, partial dominane was exhibited by all characters investigated.

• Journal of architectural history
• /
• v.26 no.5
• /
• pp.19-26
• /
• 2017

This paper aimed to identify the architectural characteristics of the chimi excavated from ancient ruins, especially middle gate remains of Bunhwangsa Temple in the Unified Silla period. Middle gate had planned $3{\times}2$ with 295mm measuring unit and gabled building. Detailed study of the shape of chimi of the middle gate restored by related field experts reveals as follows. 1) Height of chimi is 4.5(130.6cm) of Tang's system of measurement classified as large one. 2) The front and back side square hole is made for transverse timber placement. 3) Position of chimi is not the end of the ridge of roof, it moved toward the center. 4) Construction method of chimi is structured with smaller beam and center column. 5) Width and height of the ridge is less than 38cm and 54cm to be approximately, Width and height of the gabled ridge is less than 38cm and 50cm. 6) This chimi is considered to be very unique when compared to existing ancient restored chimis, it is designed to be advantageous to the chimi construction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.11
• /
• pp.1502-1513
• /
• 2002

The purpose of this study was to find relations between construction factors and adaptability on the 5 available raglan sleeve patterns through the drafting method. Also it was to suggest a functional sleeve pattern according to appearance and adaptability test. Three women in her twenties who have standard figure was selected as subjects. Raglan sleeves of 5 experimental clothes were rated by the appearance test and adaptability test. The major conclusions of this study are as follows. 1. The construction factors of the raglan sleeve are sleeve slant, sleeve cap height, biceps line, breast width. Bicep lines increased and sleeve cap height decreased as the sleeve slant decreased. The higher adaptability scores of raglan sleeves were, the lower sleeve slants were. 2. According to the appearance evaluation, B type was recorded the highest score 3. According to the adaptability scores, A type was recorded the highest score. In the pulled length of the waist-line, A type was the lowest movements among the pattern type. In the pulled length of the sleeve-line, A type was the lowest movements among the pattern types. Therefore A type was evaluated by the bort functional sleeve pattern type. Through the experiments, it was known that appearance and adaptability of the raglan sleeve patterns were effected by construction factor.