Structural Engineering and Mechanics

  • 제31권6호
  • /
  • Pages.679-696
  • /
  • 2009
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Stresses around an underground opening with sharp corners due to non-symmetrical surface load

  • Karinski, Y.S. (National Building Research Institute, Faculty of Civil and Environmental Engineering, Technion - IIT) ;
  • Yankelevsky, D.Z. (National Building Research Institute, Faculty of Civil and Environmental Engineering, Technion - IIT) ;
  • Antes, M.Y. (National Building Research Institute, Faculty of Civil and Environmental Engineering, Technion - IIT)
  • 투고 : 2007.11.20
  • 심사 : 2009.03.13
  • 발행 : 2009.04.20
⟨ 이전 논문 다음 논문 ⟩

초록

The paper aims at analyzing the stress distribution around an underground opening that is subjected to non-symmetrical surface loading with emphasis on opening shapes with sharp corners and the stress concentrations developed at these locations. The analysis is performed utilizing the BIE method coupled with the Neumann's series. In order to implement this approach, the special recurrent relations for half plane were proven and the modified Shanks transform was incorporated to accelerate the series convergence. To demonstrate the capability of the developed approach, a horseshoe shape opening with sharp corners was investigated and the location and magnitude of the maximum hoop stress was calculated. The dependence of the maximum hoop stress location on the parameters of the surface loading (degree of asymmetry, size of loaded area) and of the opening (the opening height) was studied. It was found that the absolute magnitude of the maximum hoop stress (for all possible surface loading locations) is developed at the roof points when the opening height/width ratio is relatively large or when the pressure loading area is relatively narrow (compared to the roof arch radius), and contrarily, when the opening height/width ratio is relatively small or when the surface pressure is applied to a relatively wide area, the absolute magnitude of the maximum hoop stress is developed at the bottom sharp corner points.

키워드

참고문헌

  1. Andersen, L. and Jones, C.J.C. (2006), "Coupled boundary and finite element analysis of vibration from railway tunnels – a comparison of two- and tree-dimensional models", J. Sound Vib., 293(3-5), 611-625 https://doi.org/10.1016/j.jsv.2005.08.044
  2. Antes, M.Y., Karinski, Y.S. and Yankelevsky, D.Z. (2007), "On the BIEM solution for a half space by neumann series", Commun. Numer. Meth. Eng., 23(3), 197-211 https://doi.org/10.1002/cnm.890
  3. Antes, M.Y., Karinski, Y.S. and Yankelevsky, D.Z. (2007), "The modifiened shanks transform for the solution of elastic problems by Boundary Integral Equation (BIE) method", Communications in Numerical Methods in Engineering, (in press) https://doi.org/10.1002/cnm.958
  4. Antonio, J. and Tadeu, A. (2002), "3D seismic response of a limited valley via bem using 2.5D analytical green's function for an infinite free-rigid layer", Soil Dyn. Earthq. Eng., 22(8), 659-673 https://doi.org/10.1016/S0267-7261(02)00057-X
  5. Brebbia, C.A. and Walker, S. (1980), The Boundary Element Techniques in Engineering. London: Newnes-Butterworths
  6. Bulichov, N.S. (1989), Mechanics of Buried Structures. Moscow
  7. Cavalcanti, M.C. and Telles, J.C.F. (2003), "Biot's consolidation theory – application of bem with time independent fundamental solution for poro-elastic saturated media", Eng. Anal. Bound. Elem., 27(2), 145-157 https://doi.org/10.1016/S0955-7997(02)00092-9
  8. Chen, Y.Z. (1994), "Multiply circular hole problem for an elastic half-plane", Comput. Struct., 52(6), 1277-1281 https://doi.org/10.1016/0045-7949(94)90191-0
  9. Cruse, T.A. (1973), "Application of boundary integral equation method to three-dimensional stress analysis", Comput. Struct., 3, 509-527 https://doi.org/10.1016/0045-7949(73)90094-1
  10. Dajapakse, R.K.N. and Senjuntichi, T. (1995), "Dynamic response of a multi-layered poroelastic medium", J. Earthq. Eng. Struct. Dyn., 24, 703-722 https://doi.org/10.1002/eqe.4290240507
  11. Fernando, N.S.M. and Carter, J.P. (1998), "Elastic analysis of buried pipes under surface patch loadings", J. Geotech. Geoenviron. Eng., 124(9), 720-728
  12. Fernando, N.S.M., Small, J.S. and Carter, J.P. (1996), "Elastic analysis of buried structures subject to threedimensional surface loadings", Int. J. Numer. Anal. Meth. Geotmech, 20, 331-349 https://doi.org/10.1002/(SICI)1096-9853(199605)20:5<331::AID-NAG825>3.0.CO;2-9
  13. Guzina, B.B., Fata, S.N. and Bonnet, M. (2003), "On the stress-wave imaging of cavities in a semi-infinite solid", Int. J. Solids Struct., 40(6), 1505-1523 https://doi.org/10.1016/S0020-7683(02)00650-9
  14. Hatzor, Y.H., Talesnick, M. and Tsesarsky, M. (2002), "Continuous and discontinuous analysis of the bell-shaped caverns at bet guvrin", Israel. Int. J. Rock Mech. Mining Sci., 39(7), 867-886 https://doi.org/10.1016/S1365-1609(02)00071-0
  15. Hurty, W.C. and Rubinstein, M.F. (1964), Dynamics of Structures, London: Prentice-Hall
  16. Kantorovich, L.V. (1958), Approximate Methods of Higher Analysis. NY: Interscience https://doi.org/10.1063/1.3056800
  17. Karal, F.C. and Keller, J.B. (1964), "Elastic, electromagnetic and other waves in random medium", J. Math. Phy., 3(4), 537-547
  18. Karinski, Y.S., Dancygier, A.N. and Leviathan, I. (2003), "An analytical model to predict static contact pressure on a buried structure", Eng. Struct., 25(1), 91-101 https://doi.org/10.1016/S0141-0296(02)00120-7
  19. Karinski, Y.S., Shershnev, V.V. and Yankelevsky, D.Z. (2004), "The effect of an interface boundary layer on the resonance properties of a buried structure", Earthq. Eng. Struct. Dyn., 33(2), 227-247 https://doi.org/10.1002/eqe.346
  20. Karinski, Y.S., Shershnev, V.V. and Yankelevsky, D.Z. (2007), "Analytical solution of the harmonic waves diffraction by a cylindrical lined cavity in poroelastic saturated medium", Int. J. Numer. Anal. Meth. Geomech. (in press) https://doi.org/10.1002/nag.554
  21. Kim, M.K., Lim, Y.M. and Rhee, J.W. (2000), "Dynamic analysis of layered half planes by coupled finite and boundary elelments", Eng. Struct., 22, 670-680 https://doi.org/10.1016/S0141-0296(98)00141-2
  22. Kumar, P. (1985), "Static Infinite Element Formulation", J. Struct. Eng., 111(11), 2355-2372 https://doi.org/10.1061/(ASCE)0733-9445(1985)111:11(2355)
  23. Kupradze, V.D., Gegelia, T.G., Baseleisvili, M.O. and Burculadze, T.V. (1979), Three-Dimentional Problems of Theory of Elasticity and Thermoelasticity. Amsterdam, NY, Oxsford: North-Holland Series in Applied Math. and Mech., 25, 1-929
  24. Manolis, G.D. (2003), "Elastic wave scattering around cavities in inhomogeneous continua by the BEM", J. Sound Vib., 266(2), 281-305 https://doi.org/10.1016/S0022-460X(03)00175-5
  25. Melan, E. (1932), "Der Spannungszustand der Durch Eine Einzelcraft im Innert Deanspruchten Halbscheibe", Z. Angew. Math. Mech., 12, 343-346 https://doi.org/10.1002/zamm.19320120603
  26. Mikhlin, S.G. (1965), Multidimensional Singular Integrals and Integral Equations. Oxford: Pergamon
  27. Moore, I.D. (1987), "Response of buried cylinders to surface loads", J. Geotech. Eng., 113(7), 758-773 https://doi.org/10.1061/(ASCE)0733-9410(1987)113:7(758)
  28. Moore, I.D. and Branchman, R.W. (1994), "Three-dimensional analysis of flexible circular culverts", J. Geot. Eng., 120(10), 1829-1844 https://doi.org/10.1061/(ASCE)0733-9410(1994)120:10(1829)
  29. Moser, A.P. (2001), Buried Pipe Design. McGraw-Hill
  30. Parton, V.Z. and Perlin, P.I. (1984), "Mathematical methods of the theory of elasticity", Parts 1,2. Moscow: MIR
  31. Rogier-Hendrik, De-Zutter D. (2002), "A fast technique based on perfectly matched layers to model electromagnetic from wires embedded in substrates", Radio Science, 37(2), 101-106 https://doi.org/10.1029/2000RS002624
  32. Schnack, E. and Tuerke, K. (1997), "Domain decomposition with BEM and FEM", Int. J. Numer. Meth. Eng., 40(14), 2593-2610 https://doi.org/10.1002/(SICI)1097-0207(19970730)40:14<2593::AID-NME175>3.0.CO;2-N
  33. Shanks, D. (1955), "Non linear transformation of divergent and slowly convergent series", Math. Phys., 34, 1-42 https://doi.org/10.1002/sapm19553411
  34. Small, J.C. and Wang, H.K.W. (1988), The use of integral transforms in solving three-dimensional problems in geomechanics", Comput. Geotech., 6, 199-216 https://doi.org/10.1016/0266-352X(88)90046-8
  35. Surjadinata, J., Hull, T.S., Carter, J.P. and Poulos, H.G. (2006), "Combined finite-and boundary-element analysis of the effects of tunneling on single piles", Int. J. Geomech., 6(5), 374-377 https://doi.org/10.1061/(ASCE)1532-3641(2006)6:5(374)
  36. Szechny, K. (1973), The Art of Tunneling. Budapest
  37. Talles, J.C.F. (1983), The Boundary Element Method Applied to Inelastic Problems. Springer

피인용 문헌

  1. Stress state around cylindrical cavities in transversally isotropic rock mass vol.6, pp.3, 2014, https://doi.org/10.12989/gae.2014.6.3.213
  2. A BIEM approach to a time-harmonic analysis of saturated soil–structure interaction with elastic-type contact conditions vol.53, 2015, https://doi.org/10.1016/j.enganabound.2014.12.002
  3. Numerical study of performance of soil-steel bridge during soil backfilling vol.42, pp.4, 2009, https://doi.org/10.12989/sem.2012.42.4.571