• The Korean Journal of Mycology
• /
• v.45 no.3
• /
• pp.246-250
• /
• 2017

Sclerotium rot was observed on mungbean (Phaseolus radiatus L.) plants cultivated in the exhibition field of Gyeongsangnam-do Agricultural Research and Extension Services in September 2015. The progression of rot was initially observed as water-soaked lesions on several parts of the affected plant. Severely infected plants were blighted and eventually died. White mycelial mats spread over the lesions and numerous sclerotia formed on stems near the soil line. The sclerotia were globoid in shape, 1~3 mm in size, and white to brown in color. The optimum temperature for mycelial growth and sclerotia formation on potato dextrose agar (PDA) was $30^{\circ}C$ and the hyphal width was $4{\sim}8{\mu}m$. Typical clamp connections were observed on the hyphae of fungus grown on PDA. For molecular identification, the complete internal transcribed spacer (ITS) ribosomal DNA (rDNA) of the causal fungus was sequenced and analyzed. Based on the mycological characteristics, ITS rDNA sequence analysis, and pathogenicity to host plants, the fungus was identified as Sclerotium rolfsii. This is the first report of Sclerotium rot on mungbean caused by S. rolfsii in Korea.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.4
• /
• pp.3897-3920
• /
• 1975

Since the most of Korean dairy and cattle raising farms are too small to introduce western mechanized farming, it is necessary to develope small size equipments. This study has been carried to develop a rotary mower as on attachment of 8 to 10 horse powertiller which is widely spread in rural area. It will not ony be helpfull for the farmers to harvesting hay grass but also desirable to increase the power tiller utility. The protto type rotary mower designed through the fundamental investigations, has been modified and improved through the field trials, and a series of field tests has been carried to investigate its performance and economic feasibility comparing with existing vailable harvesting equipments. The results are as follows; 1. To increase the stability, two guide wheels are attached to both side of the protto type rotary mower. 2. To prevent the clinging of tall grasses, the vertical driving shafts are covered with cylindrical protectors. 3. The cutting height is adjustable in 8 steps from 2.5 to 20 centimeters by changing the length of guide wheel legs. 4. The practical Critical cutting speed were always higher than theoretical value in both case of single cutting blade and three when the cutting depth was 25 millimeter. 5. The peripheral speed of cutting blade was varied in response to the change of engine speed, mean while the peripheral speed was adequate as it was changhed from 25 to 35 meter per second when the power tiller is operated in proper working ground speed. 6. The time requirement to harvest 10 a were 88.7, 54.6 and 41.4 minutes for the first, second and third stage of ground speed respectively, and because of the difficulty of delivery, it was observed that operating with fourth stage of ground speed was not recomanendable when the grass height is taller than 90 centimeters. 7. The performance of rotary mower were 1.1-1.7, 1.4-4.0, 3.8-11.8 and 7.4-22.0 times of reciprocating mower, portable disc type cutter, hay scythe and ordinary sickle respectively. 8. When the slope exceeds, 20 degree the downward harvesting operation was impossible because of the excessive front end weight, while less than 5 degree of land slope did not effect in field operation. 9. Increased traveling spee caused higher cutting height and slight cutting failure, but seems not to effect to the gross yield, and the efficiency of cutting width were from 83 to 94 precent. 10. Tn rank of economy were rotary mower (3,2 stage operation), reciprocating mower, hay scythe, portable disc type cutter and sickle in order when the annul operation exdeeds 100 hours. From the above results, it is convinced that the protto type rotary mower is good enough to the livestock farmers as a hay harvesting equipment because of its economy, hardiness in operating and its out standing performance and hopefully it will contribute to the extension of Korean livestock farming.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.153-160
• /
• 2010

We modified the optical system of 500 mm wide-field telescope of which point spread function showed an irregularity. The telescope has been operated for Near Earth Space Survey (NESS) located at Siding Spring Observatory (SSO) in Australia, and the optical system was brought back to Korea in January 2008. After performing a numerical simulation with the tested value of surface figure error of the primary mirror using optical design program, we found that the surface figure error of the mirror should be fabricated less than root mean square (RMS) $\lambda$/10 in order to obtain a stellar full width at half maximum (FWHM) below $28\;{\mu}m$. However, we started to figure the mirror for the target value of RMS $\lambda$/20, because system surface figure error would be increased by the error induced by the optical axis adjustment, mirror cell installation, and others. The radius of curvature of the primary mirror was 1,946 mm after the correction. Its measured surface figure error was less than RMS $\lambda$/20 on the table of polishing machine, and RMS $\lambda$/15 after installation in the primary mirror cell. A test observation performed at Daeduk Observatory at Korea Astronomy and Space Science Institute by utilizing the exiting mount, and resulted in $39.8\;{\mu}m$ of stellar FWHM. It was larger than the value from numerical simulation, and showed wing-shaped stellar image. It turned out that the measured-curvature of the secondary mirror, 1,820 mm, was not the same as the designed one, 1,795.977 mm. We fabricated the secondary mirror to the designed value, and finally obtained a stellar FWHM of $27\;{\mu}m$ after re-installation of the optical system into SSO NESS Observatory in Australia.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.3
• /
• pp.281-288
• /
• 2016

Purpose: The present study was aimed to investigate the change of optical quality in fully cured eyes from central serous chorioretionopathy(CSC) and CSC under treatment, respectively. Methods: A total of 136 eyes(68 subjects) was divided into CMC under treatment and its asymptomatic contralateral eye, fully cured eyes after being diagnosed with CMC and its contralateral eye, and normal eyes. Objective scattering index, cut-off value in modulation transfer function, focusing rate, PSF(Point Spread Function) width at 50%, 10% and the contrast sensitivity were measured and analyzed. Results: CMC under treatment showed statistically significant decrease in all evaluations of optical quality compared with asymptomatic contralateral eyes, fully cured eyes and normal eyes. Although there was no significant difference in optical quality between asymptomatic contralateral eyes of CMC under treatment and fully cured eyes, there was tendence in optical quality decreasing compared with normal eyes. Conclusions: From the study, it was revealed that the optical quality was different according to the treatment phase in CMC. The use of optical quality assessment for the decision of complete cure and the evaluation of prognosis in CMC is also proposed.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.407-410
• /
• 2002

Monochromatic x-ray CT has several advantages over conventional CT, which utilizes bremsstrahlung white x-rays from an x-ray tube. There are several methods to produce such monochromatic x-rays. The most popular one is crystal diffraction monochromatization, which has been commonly used because of the fact that the energy spread is very narrow and the energy can be changed continuously. The alternative method is the use of fluorescent x-ray, which has several advantages such as large beam size and fast energy change. We have developed a parallel-beam and a fan-beam monochromatic x-ray CT, and compared some characteristics such as accuracy of CT numbers between those systems. The fan beam monochromatic x-rays were generated by irradiating target materials by incident white x-rays from a bending magnet beam line NE5 in 6.5 GeV Accumulation Ring at Tukuba. The parallel beam monochromatic x-rays were generated by using a silicon double crystal monochromator at the bending magnet beam line BL-20BM in Spring-8. A Cadmium telluride (CdTe) 256 channel array detector with 512mm sensitive width capable of operating at room temperature was used in the photon counting mode. A cylindrical phantom containing eight concentrations of gadolinium was used for the fan beam monochromatic x-ray CT system, while a phantom containing acetone, ethanol, acrylic and water was used for the parallel monochromatic x-ray CT system. The linear attenuation coefficients obtained from CT numbers of those monochromatic x-ray CT images were compared with theoretical values. They showed a good agreement within 3%. It was found that the quantitative measurement can be possible by using the fan beam monochromatic x-ray CT system as well as a parallel beam monochromatic X-ray CT system.

• Explosives and Blasting
• /
• v.26 no.2
• /
• pp.38-44
• /
• 2008

Recently, planning road construction in South Korea is focused on upgrading of the existing road by rerouting or restructuring. For this, roads under current construction in Korea go for more straight in its alignments and routing. Straight routing makes it all the more required to construct many mountain tunnels and bridges in Korea where mountains are so widely spread. Some portal of mountain tunnel is not rarely planed at high steep slope of mountain valley where it is not easy to secure working space for tunnel excavation. Reverse excavation is an alternative measure for excavation of tunnel portal at high steep slope. Construction in reverse excavation method has three important points requiring careful consideration: 1)planning of pilot tunnel in proper width, height, and length etc., 2)measure against the effect of one-side earth pressure to the direction of tunnel portal, 3)securing tunnel safety against shallow ground condition at portal zone. This paper intends to suggest applicable range of pilot tunnel for reverse excavation at the portal zone located at high steep slope, and shows result of study on the appropriateness of a reverse excavation by means of 3D numerical analysis. Result of 3D numerical analysis for reverse excavation at high steep slope shows that pilot tunneling will be applicable to start from the point $20{\sim}25m$ before the portal from inside the tunnel.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.291-300
• /
• 2011

Archaeomagnetic dating method is used to assign a date to the archaeological remains in which burnt soil is found by measuring the changes in terrestrial magnetism with the thermal remanent magnetization retained in burnt soil. This method, in particular, is quite useful to determine an age of the archaeological remains in which no properties are found, which makes it difficult to assigning a date. Hemp kiln and lime kiln fall under remains of these features, and 21 and 5 archaeomagnetic data from both kilns respectively were obtained by measuring the- remanent magnetization in burnt soil samples that are extracted in hemp kilns and lime kilns in the country. The results of archaeomagnetic dating with these data show the age range of the hemp kilns is between the late 10th century A.D. and the middle of the 19th century, and that of the lime kilns is between the early 16th century A.D. and the middle of the 18th century. The factor that the number of data collected from the hemp kilns was comparatively more than those from the lime kilns might affect the result, however corresponding to the fact that hemp had been used for a long period of time, the period of hemp kiln are widely spread over the chronological table. And the archaeomagnetic dating of lime kiln, in view of archaeological periods, is not only in accord with the late Joseon period when the tombs with lime-soil mixture barrier in trend; this is also telling that its width of archaeological period is comparatively narrow.

• Research in Plant Disease
• /
• v.19 no.3
• /
• pp.229-232
• /
• 2013

Sclerotium rot of cucumber (Cucumis sativus L.) occurred at the experimental field of Gyeongsangnam-do Agricultural Research and Extension Services in July 2012. The typical symptoms included wilt, rot, and water-soaking on stems and fruits and severely infected plants eventually died. White mycelial mats spread over lesions, and then sclerotia were formed on fruit and near soil line. The sclerotia were globoid in shape, white to brown in color and 1-3 mm in size and the hyphal width was 4-8 ${\mu}m$. The optimum temperature for mycelial growth and sclerotia formation on PDA was $30^{\circ}C$. The typical clamp connections were observed in the hyphae of the fungus grown on PDA. For further identification, the complete internal transcribed spacer (ITS) rDNA region was amplified and sequenced. On the basis of mycological characteristics, ITS rDNA region comparison, and pathogenicity to host plants, this fungus was identified as Sclerotium rolfsii Saccardo. This is the first report of sclerotium rot on cucumber caused by S. rolfsii in Korea.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.477-486
• /
• 2020

The purpose of this study was to evaluate the effects of reconstruction filters, X-ray source trajectories and intervals in the quality of digital tomosynthesis (DT) images, and the results was clinically validated. The filtered back-projection was implemented by using Ramp, Shepp-Logan, Cosine, Hamming, Hann and Blackman filters, and the X-ray source trajectories were simulated with 1 × 36, 2 × 18, 3 × 12, 4 × 9 and 6 × 6 arrays. The X-ray source intervals were 5, 10, 20, 30 and 40 mm. The depth resolution, spatial resolution and noise of DT image were evaluated by measuring artifact spread function (ASF), full width at half maximum (FWHM) and signal-to-noise ratio (SNR), respectively. The results showed that the spatial resolution and noise properties of DT images were maximized by the Ramp and Blackman filters, respectively, and the depth resolution and noise properties of the DT images obtained with a 1 × 36 X-ray source trajectory were superior to the other trajectories. The depth resolution and noise properties of DT images improved with an increase of X-ray source intervals, and the high X-ray source intervals degraded the spatial resolution of DT images. Therefore, the characteristics of DT images are highly dependent on reconstruction filters, X-ray source trajectories and intervals, and it is necessary to use optimal imaging parameters in accordance with diagnostic purpose.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.607-614
• /
• 2015

This study aims to analyze the current status of timber production operation and the effects of the forestry mechanization projects on timber production. In order to increase the domestic timber production, it is necessary to propel forestry mechanization project, improve policy and institution, broaden forest-road network, enlarge the number of forest workers, enhance timber production and supply system, provide forestry machines, establish forest operation system, and train forest workers. In addition, the reestablishment of policy goals, the consistency of policy, and the rearrangement of laws and institution are considered more important. To improve the results and effects of forestry mechanization project, it is necessary to drive of forestry mechanization project, the spread of forestry machines, the cultivation of trainer ability, the development of training materials, and the teaching of field skill. In order to meet timber buyersí preference, timber needs to be produced through whole tree logging operation system. Expanding the proportion of domestic timber among total timber demand in Korea requires price competitiveness, and the supply ability of high quality product from the perspective of length and width.