• The Journal of the Acoustical Society of Korea
• /
• v.8 no.4
• /
• pp.44-52
• /
• 1989

The UCERSS (Unit Circle Eigendecomposition Rational Signal Subspace) algorithm has extended MUSIC (MUltiple Signal Classification ) by using eigendecomposition on the unit circle in order to estimate incident angles of multiple wide band signals. The purpose of this thesis is to further extend the UCERSS to be able to estimate the direction of arrivals of multiple wide band signals in very low SNR . The wide band ESPRIT (Estimation of Signal Parameter via Rotational Invariance Technique) uses covariance difference matrices to reduce noise components. In this paper the wide band ESPRIT which combines the ideas of UCERSS and ESPRIT Is proposed. Computer simulation results Indicate that the performances of the proposed approaches are superior to those of the UCERSS in very low SNR.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.197-204
• /
• 2013

In this paper, we propose a new method for artificial bandwidth extension of narrow-band signal in frequency domain. In the proposed method, a narrow-band signal is decomposed into excitation signal and spectral envelope, which are extended independently in frequency domain. The excitation signal is extended such that low-band harmonic structure is maintained in high band, and the spectral envelope is extended based on sub-band energy using NMF. Finally, the spectral phase is determined based on signal correlation between frames in time domain, resulting in the final wide-band signal. The subjective evaluation verified that the wide-band signal generated by the proposed method has a higher quality than the original narrow-band signal.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.39-42
• /
• 2008

In this paper, we analyze the performance of ultra wide band (UWB) systems in indoor wireless channel in accordance with the number of pulses per bit at transmit signals and the decision types of receiver. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a. Two types of UWB signals are considered One is the pulse position modulation-time hopping (PPM-TH) signal. And the other is the pulse amplitude modulation-direct sequence (PAM-DS) signal. It is assumed that the receiver is an ideal receiver which can receive all signals of the multipath.

• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.969-977
• /
• 1996

본고에서는 여러가지 Wide Band-gap중에서 특히 최근에 많은 관심을 끌고 있는 GaN와 4H-SiC, 6H0SiC의 전자기적 물성을 소개하고 현재 이들로부터 제작된 prototype소자들의 성능을 비교함으로써 그 발전현황을 알아보기로 한다. 본고에서 관심을 두는 소자분야는 광전소자(optoelectronic devices)라기보다는 고주파 고출력용 전력소자임을 밝힌다. 아울러 GaN로부터 제작된 MESFET(MEtal Semiconductor Field-Effect Transistor)소자의 고주파 대역에서의 Large-Signal특성을 Device/Circuit Model을 통하여 실험치와 비교하여보고 이로부터 최적화된 channel 구조를 갖는 소자구조에서의 RF특성을 조사한다.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.217-218
• /
• 2008

Since the digital TV signal band is very wide ($54{\sim}806MHz$), the VCO used in the frequency synthesizer must also have a wide frequency tuning range. Multiple LC VCOs have been used to cover such wide frequency band. However, the chip area increases due to the increased number of integrated inductors. A general method for achieving both reduced VCO gain(Kvco) and wide frequency band is to use the switched-capacitor bank LC VCO. In this paper, a scheme is proposed to cover the full band using only one VCO. The RF VCO block designed using a 0.18um CMOS process consists of a wideband LC VCO with reduced variation of VCO gain and frequency steps. Buffers, divide-by-2 circuits and control logics the simulation results show that the designed circuit has a phase noise at 100kHz better than -106dBc/Hz throughout the signal band and consumes $9.5{\sim}13mA$ from a 1.8V supply.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.195-196
• /
• 2007

Since the digital TV signal band is very wide ($54{\sim}806MHz$), the VCO used in the frequency synthesizer must also have a wide frequency tuning range. Multiple LC VCOs have been used to cover such wide frequency band. However, the chip area increases due to the increased number of integrated inductors. In this paper, a scheme is proposed to cover the full band using only one VCO. The RF VCO block designed using a 0.18um CMOS process consists of a wideband LC VCO, five divide-by-2 circuits and several buffers. The simulation results show that the designed circuit has a phase noise at 10kHz better than -87dBc/Hz throughout the signal band and consumes 10mA from a 1.8V supply.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.1
• /
• pp.93-98
• /
• 2020

Research on underwater sensor networks is increasing due to such reasons as marine resource management, maritime disaster prediction and military protection. Many underwater sensor networks performs wireless communication using an acoustic sound wave band signal having a relatively low frequency. So the digital part of their modem can take charge of carrier band signal processing. To enable this, the sampling rate of the baseband band signal should be increased to a sampling rate at which carrier band signal processing is possible. In this paper, we designed a sampling rate increasing circuit based on a CIC interpolator for underwater sensor nodes. The CIC interpolator has a simple circuit structure. However, since the CIC interpolator has a large attenuation of the pass band and a wide transition band, an inverse sinc LPF is added to compensate for frequency response of the CIC interpolator. The proposed interpolator was verified in time domain and frequency domain using ModelSim and Matlab.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.64-68
• /
• 2007

This paper describes the development of RF front.end equipment of a wide band high precision satellite navigation receiver to be able to receive the currently available GPS navigation signal and the GALILEO navigation signal to be developed in Europe in the near future. The wide band satellite navigation receiver with high precision performance is composed of L - band antenna, RF/IF converters for multi - band navigation signals, and high performance baseband processor. The L - band satellite navigation antenna is able to be received the signals in the range from 1.1 GHz to 1.6 GHz and from the navigation satellite positioned near the horizon. The navigation signal of GALILEO navigation satellite consists of L1, E5, and E6 band with signal bandwidth more than 20 MHz which is wider than GPS signal. Due to the wide band navigation signal, the IF frequency and signal processing speed should be increased. The RF/IF converter has been designed with the single stage downconversion structure, and the IF frequency of 140 MHz has been derived from considering the maximum signal bandwidth and the sampling frequency of 112 MHz to be used in ADC circuit. The final output of RF/IF converter is a digital IF signal which is generated from signal processing of the AD converter from the IF signal. The developed RF front - end has the C/N0 performance over 40dB - Hz for the - 130dBm input signal power and includes the automatic gain control circuits to provide the dynamic range over 40dB.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3190-3192
• /
• 1999

A Novel wide-band wide-tunable current-mode (CM) gamma corrector for HDTV camera applications is proposed. The gamma corrector provides accurate gamma control in a wide range by simple electrical adjustment of weighting amplifiers' gain. It has wide signal bandwidth more than 40MHz sufficient for HDTV video signal processing and is implementable with simple integrated circuit with low power dissipation of 125mW.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.912-918
• /
• 2001

This paper presents a performance analysis of experimental observations of a uplink smart antenna system operating in a wide-band CDMA environment designed for a WLL (Wireless Local Loop) system. The numerical results shown in this paper have been obtained from practical experiments using commercially developed mobile terminals. The beam pattern provided by the weight vector and the resultant BER (Bit Error Rate) are observed in both indoor and outdoor signal environments. From the experimental observations, it is concluded that the proposed smart antenna system provides significant improvements in receiving both indoor and outdoor signal environments.