• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.670-674
• /
• 2016

The control performance of hybrid PWM inverter using a phase current measurement is presented in this paper. The hybrid PWM technique consists of space vector pulse width modulation (SVPWM) and six-step voltage control operation. The SVPWM is performed to reduce the harmonic components in the low speed region, and the six-step modulation is applied to increase the maximum speed of the IPMSM in the high speed region. Therefore, it is possible to obtain a great performance in both the low speed range and high speed range. However, the six-step modulation cannot be completely implemented, since the inverter that includes the lag-shunt sensing method has an immeasurable current region. In this paper, a quasi-six-step modulation using a modified voltage vector is proposed. The validity and usefulness of the proposed PWM technique is verified by MATLAB/Simulink and experimental results.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.603-605
• /
• 1994

The Single-Phase induction motor is widely used in home appliances, especially refrigerator, air conditioner and washing machine. Recently many home appliances that use the motor require the speed control to get the various and convenient functions for the customers. Generally it is so hard to control the speed of the Single-Phase induction motor and to get the wide range of the speed variation. In this raper, the speed controller using P-I is designed for the Single-Phase induct ion Motor. The experimental results of the phase controller using P-I show the wide speed control of the Single-Phase induction motor and rebuff control to load change.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.278-281
• /
• 1995

In this paper, a instantaneous speed measurement methode using a three phase sinusoidal taco-generator is described and it's simulations are developed. The proposed methode can easily detect the motor speed by using that the output voltage of taco-generator is propotion to the motor speed. Because the proposed methode consists of some calculation, the proposed system can be implemented with analog devices or micro processor conveniently. From the simulation resualts, the proposed measurement methode can acculately detect the real motor speed over wide range.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.474-476
• /
• 1999

This paper presents the vector control of induction motor for traction drives. Especially, the PWM mode control method is well described to be selected as the change of speed to meet the wide speed range of the traction motor. Asynchronous space vector PWM mode and synchronous one pulse mode are basically used under the full speed range with the overmodulation PWM mode for the soft transfer between them. The validity of this proposed control scheme is verified with the simulation results.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.9-11
• /
• 1995

In order to achieve a essential requirement for the driving system of electric vehicles, that is, starting pick-up ability, a wound-type induction motor with double-rotor structure is proposed. Slip Power Recovery system is adopted to improve the efficiency in the low speed range and to control speed of this system. Theoretical analysis and experimental results from 300[W] prototype motor is presented to verify the improvement of pick-up ability and high-efficiency driving characteristics through the wide speed range, especially under the low speed range.

• Journal of Power Electronics
• /
• v.10 no.5
• /
• pp.477-484
• /
• 2010

A pulse width modulation-voltage source inverter (PWM-VSI) is used for variable speed permanent magnet synchronous motor (PMSM) drives. The PWM-VSI fed PMSM has two major disadvantages. Firstly, the PWM-VSI DC-link voltage limits the magnitude of the PMSM terminal voltage. As a result, the motor speed is restricted. Secondly, in a low speed range, the PWM-VSI modulation index declines. This is caused by a high DC-link voltage and a low terminal voltage ratio. As a result, the distortion of the voltage command and the stator current are increased. This paper proposes an optimal pulse amplitude modulation (PAM) control which can adjust the inverter DC-link voltage by using a buck-boost DC-DC converter. At a low speed range, the proposed system can reduce the distortion of the voltage command, which improves the stator current waveform. Also, the allowable speed range is extended. In order to verify the proposed method, experimental results are provided to confirm the simulation results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.16-21
• /
• 2013

This paper presents a DC link voltage control method to reduce the ripple current and the switching loss in the sinusoidal current drive system for the wide-speed range PMSM. The DC link voltage of the three phase inverter in the sinusoidal current drive system is designed by the back-EMF voltage at maximum speed of the PMSM. In general, the drive systems have used the constant DC link voltage without reference to the motor speed. The current ripple causes hysteresis loss and makes noise. In addition, the switching loss on the inverter increases in proportion to the rise in the DC link voltage. In this paper, we propose the variable DC link voltage control method to reduce the current ripple in the PMSM drive system. We show reduction effect of the current repple and the switching loss through simulation results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.324-328
• /
• 2012

A recovered jitter of CDR(Clock and Data Recovery) Circuit based on Dual-loop DLL(Delay Locked Loop) for data recovery in high speed serial data communication is changed by depending on the input data and reference clock frequency. In this paper, 2-step DPC which has constant jitter performance for wide-range input frequency is proposed. The designed prototype 2-step CDR using proposed 2-step DPC has operation frequency between 200Mbps and 4Gbps. Average delay step of 2-step DPC is 10ps. Designed CDR circuit was tested with 0.18um CMOS process.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.243-246
• /
• 2003

This paper presents a new motor design well suited for an advanced exercise bike. The advanced exercise bike setup high demands for performance and physical dimensions, which is high torque, wide speed range and a diameter/length ratio around 5. These requirements makes the new motor design called an E-core Transverse Flu Machine (ETFM) vev interesting because the segmented design of the stator and rotor poles enables high diameter without increasing the flux-path and since the ETFM is similar to the switched reluctance motor, high torque and wide speed range is possible. The design of the ETFM can be peformed using a developed design program, which is also introduced in the paper. A prototype of the exercise bike with the ETFM and a classical H-bridge converter with analog current control is constructed for verification of the concept.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.854-855
• /
• 2011

In this paper, Interior permanent magnet synchronous motor(IPMSM) with concentrated winding for 110cc electric motorcycle is introduced. Optimum design is performed so as to satisfy wide speed operation range. And output characteristics is analyzed according to shoe height in many variables. Because partial magnetic saturation in shoe affects the harmonics, output characteristics of motor could be confirmed that a significant change. As a result, the new shape and the optimal design parameters considering the partial magnetic saturation is obtained. Compared with the base model, wide operating range was confirmed.