• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1994년도 춘계학술발표회
• /
• pp.43-48
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite which has very wide band frequency characteristics is proposed and discussed. The wide band electromagnetic wave absorber can be designed by the proposed equivalent material constants method for the regions varying spatially in the shape of ferrite. Furthemore the wide band ferrite electromagnetic wave absorbers with taper which have not only excellent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity were designed.

• 한국항해학회지
• /
• 제18권2호
• /
• pp.151-158
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite, which has very wide band frequency characteristics, is proposed and discussed. The wide band electroma-gnetic wave absorber can be designed by the proposed equivalent material constants method for the re-gions varying spatially in the shape of ferrite. Futhermore, the wide band ferrite electromagnetic wave absorber with taper, which have not only exce-llent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity, were designed.

• 전자공학회논문지 IE
• /
• 제46권1호
• /
• pp.1-6
• /
• 2009

본 논문에서는 광대역 주파수 합성기의 구현을 위하여 주파수 검출 범위와 락킹 시간을 개선한 디지털 PLL의 구조 및 설계에 대하여 기술한다. 제안된 구조에서는 광대역의 고속 주파수 비교기를 위하여 광역 디지털 로직 직교상관기를 사용하였고, 2 비트 업-다운 카운터 및 시그마-델타 변조기를 적용하여 디지털 제어 발진기의 주파수가 제어되도록 하였다. 따라서 양자화에 의한 잡음으로부터 추가되는 위상 잡음을 감소시킬 수 있으며, 최근의 휴대용 멀티미디어 통신 단말기 등에서 요구되는 고속의 락킹 및 광대역 지원, 그리고 저전력 현에 적합하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.217-218
• /
• 2008

Since the digital TV signal band is very wide ($54{\sim}806MHz$), the VCO used in the frequency synthesizer must also have a wide frequency tuning range. Multiple LC VCOs have been used to cover such wide frequency band. However, the chip area increases due to the increased number of integrated inductors. A general method for achieving both reduced VCO gain(Kvco) and wide frequency band is to use the switched-capacitor bank LC VCO. In this paper, a scheme is proposed to cover the full band using only one VCO. The RF VCO block designed using a 0.18um CMOS process consists of a wideband LC VCO with reduced variation of VCO gain and frequency steps. Buffers, divide-by-2 circuits and control logics the simulation results show that the designed circuit has a phase noise at 100kHz better than -106dBc/Hz throughout the signal band and consumes $9.5{\sim}13mA$ from a 1.8V supply.

• 한국항해학회지
• /
• 제19권2호
• /
• pp.99-106
• /
• 1995

A wide band design method of an electromagnetic wave absorber with square ferrite cylinders in the second layer, which has very wide band frequency characteristics, is proposed and discussed. A theoretical model using the equivalent material constants method is also evaluated and proposed for its accuracy by comparison with Hashin-Shtrikman formulas. Based on the developed model, wide band electromagnetic wave absorbers with excellent reflective frequency characteristics in the frequency range of 30MHz to 3, 690MHz were designed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.431-432
• /
• 2007

A general method for both reduced VCO gain ($K_{vco}$) and wide frequency band is to use the switched-capacitor bank LC VCO. However, $K_{vco}$ can fluctuate widely in the wide oscillation frequency range of the VCO. In this paper, a design of wide-band VCO with improved frequency-voltage gain performance is presented. Optimized multiple varacter switching technique is used for reducing its frequency-voltage gain variation.

• 한국전자파학회논문지
• /
• 제7권4호
• /
• pp.346-352
• /
• 1996

초광대역 주파수 특성을 가지며, 제2층에 십자형 슬롯을 가지는 2층형 전파흡수체의 광대역 설계법을 제안하였다 이와같은 광대역 전파흡수체는 등가재료정수법을 적용한 이론 모델을 이용하여 설계할 수 있다. 제안한 모델을 바탕으로 30MHz~3,170MHz의 주파수 범위에서 우수한 반사감쇠 특성을 가지는 초광대역 전파흡수체를 설계하였다.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.8-16
• /
• 1997

A wide band design method of an electromagnetic wave absorber with using exponentially tapered ferritic is proposed and discussed. A theoretical model using the equivalent material constants method is also proposed to analyze the regions varying sptially in the shape of ferrite. Based on the developed model, wide band electromagnetic wave absorbers with excellent reflectivity frequency charaateristics in the freqency rang eof 30MHz to 2,150MHz or 2,430MHz were designed.

• 대한조선학회논문집
• /
• 제48권4호
• /
• pp.299-307
• /
• 2011

The offshore plants such as FPSO are subjected to combination loading of environmental conditions (swell, wave, wind and current). Therefore the fatigue damage is occurred in the operation time because the units encounter the environmental phenomena and the structural configurations are complicated. This paper is a research for frequency domain fatigue analysis of wide-band random loading focused on accuracy of fatigue damage estimation regarding the proposed methods. We selected ideal bi-modal spectrum. And comparison between time-domain fatigue analysis and frequency-domain fatigue analyses are conducted through the fatigue damage ratio. Fatigue damage ratios according to Vanmarcke's bandwidth parameter are founded for wide-band. Considering safety, we recommend that Jiao-Moan and Tovo-Benasciutti methods are optimal way at the fatigue design for wide-band response. But, it is important that these methods based on frequency-domain unstably change the accuracy according to the material parameter of S-N curve. This study will be background and guidance for the new frequency-domain fatigue analysis development in the future.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.415-420
• /
• 2005

To construct an anechoic chamber for EMI test satisfying some international standards, it has been recognized that the absorption characteristics of the EM wave absorber must have more than 20 dB over the frequency band from 30 MHz to 18 GHz. In this paper, an EM wave absorber with super wide-band frequency characteristics was proposed and designed in order to satisfy the above requirements by using the EMCM[1]. As a result, the proposed absorber has absorption characteristics more than 20 dB over the frequency band from 30 MHz to more than 20 GHz.