• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.6
• /
• pp.85-96
• /
• 2000

It is necessary that fully differential operational amplifier circuit should drive an external load in the VLSI design such as SCF(Switched Capacitor Filter), D/A Converter, A/D Converter, Telecommunication Circuit and etc. The conventional CMOS operational amplifier circuit has many problems according to CMOS technique. Firstly, Capacity of large loads are not able to operate well. The problem can be solve to use class AB stages. But large loads are operate a difficult, because an element of existing CMOS has a quadratic functional relation with input and output voltage versus output current. Secondly, Whole circuit of dynamic range decrease, because a range of input and output voltages go down according as increasing of intergration rate drop supply voltage. The problem can be improved by employing fully differential operational amplifier using differential output stage with wide output swing. In this paper, we proposed new current mirror has large output impedance and good current matching with input an output current and compared with characteristics for operational amplifier using cascoded current mirror. To obtain large output swing and low power consumption we suggest a fully differential operational amplifier. The circuit employs an output stage composed new current mirror and two amplifier stage. The proposed circuit is layout and circuit of capability is inspected through simulation program(SPICE3f).

• 한국해양학회지
• /
• v.27 no.2
• /
• pp.154-163
• /
• 1992

Bacterial abundance, production, and environmental parameters were investigated three times to study distribution of bacterial variables and to examine how estuarine mixing would influence the distribution of bacterial variables in the euphotic zone of the estuarine system of the Mankyung river and Dongjin river during a period of October, 1990-August, 1991. Although a limited number of investigations were made, bacterial abundance and production showed large variations from 0.4 to 5.8${\times}$10/SUP 9/ 1/SUP -1/ and from 0.1 to 22.2 ug C 1/SUP -1/ d/SUP -1/, respectively. The wide ranges of bacterial variables indicated very dynamic changes in conditions of bacterial growth in the estuary. Interestingly, bacterial abundance substantially increased with depth in most stations f shallow depth. but bacterial production remarkably decreased with depth. We propose that the observed distribution of bacterial abundance and production would be explained by estuarine mixing in the estuary. Analyses of mixing diagrams showed that estuarine mixing would mix conservatively bacteria and bacterial production. Further, estuarine mixing often seemed to cause an increase in bacterial abundance and reduction of bacterial production presumably due to resuspension of sediment. This suggests that roles of estuarine mixing would be significant in the distribution of bacterial abundance and production, and thus in biogeochemical cycles in the estuary.

• 한국해양학회지
• /
• v.19 no.2
• /
• pp.141-152
• /
• 1984

In order to investigate the circulation dynamics of the Keum River estuary, 300velocity fields obtained at six sites over two tidal cycles by using instantaneous profiling technique were analyzed in detail. In this investigation, the variability of shear velocity, bottom shear stress, drag coefficient, and roughness length scale were confirmed. The measured values of the bottom boundary drag coefficient show wide range of variations, i.e., C$\_$100/=6.78${\times}$10$\^$-5/∼1.15${\times}$10$\^$-1/, and the mean of 300 measurements is 1.6${\times}$10$\^$-2/. The relationship between U* and C$\_$100/ also show the scatter in values. However, overall mean values over two tidal cycles at 6 stations show that if U* 1cm/s, C$\_$100/ is unpredictable, if U* 1cm/s, C$\_$100/ increase with U*. The values of Re$\_$100/ and C$\_$100/ have scatter. But the overall mean values over two tidal cycles show that if Re$\_$100/ 3.6${\times}$10$\^$5/, C$\_$100/ is unpredictable, if Re$\_$100/ 3.6${\times}$10$\^$5/, C$\_$100/=1.4${\times}$10$\^$-2/. Finally the flow regime of the Keum River estuary was classified as "subcritical fully turbulent" flow.

• Journal of Korea Soil Environment Society
• /
• v.1 no.1
• /
• pp.89-102
• /
• 1996

An integrated model is presented to describe underground flow and mass transport, using a multicomponent multiphase approach. The comprehensive governing equation is derived considering mass and force balances of chemical species over four phases(water, oil, air, and soil) in a schematic elementary volume. Compact and systemati notations of relevant variables and equations are introduced to facilitate the inclusion of complex migration and transformation processes, and variable spatial dimensions. The resulting nonlinear system is solved by a multidimensional finite element code. The developed code with dynamic array allocation, is sufficiently flexible to work across a wide spectrum of computers, including an IBM ES 9000/900 vector facility, SP2 cluster machine, Unix workstations and PCs, for one-, two and three-dimensional problems. To reduce the computation time and storage requirements, the system equations are decoupled and solved using a banded global matrix solver, with the vector and parallel processing on the IBM 9000. To avoide the numerical oscillations of the nonlinear problems in the case of convective dominant transport, the techniques of upstream weighting, mass lumping, and elementary-wise parameter evaluation are applied. The instability and convergence criteria of the nonlinear problems are studied for the one-dimensional analogue of FEM and FDM. Modeling capacity is presented in the simulation of three dimensional composite multiphase TCE migration. Comprehesive simulation feature of the code is presented in a companion paper of this issue for the specific groundwater or flow and contamination problems.

• Korean Journal of Childcare and Education
• /
• v.8 no.4
• /
• pp.5-31
• /
• 2012

The purpose of this study was to examine major journals of early childhood education and childcare in an effort to determine research trends in early childhood education and childcare policies between 1995 and 2011. One hundred twenty-six papers included in journals that registered with Korea Research Foundation were analyzed to keep track of research trends in early childhood education and childcare policies. A research trend in another area that early childhood education and childcare policies were linked to each other in a broad sense was explored as well. Specifically, the year of the papers, their research themes, purposes, data gathering methods, form of research, number of researchers and financial assistance were analyzed. As a result, it was found that a lot of papers were presented in and after the mid-2000s, and that the most dynamic research efforts were channeled into childcare policies. As for research theme, a wide variety of themes were covered every year. The most dominant type of research was literature review, and the most common purpose of the studies was to examine the state of national policies. Literature analysis was the most prevailing data collection methods, and the most dominant form of research was case studies. In terms of the number of researchers and financial aid, the largest number of the papers was conducted by individuals and without any financial assistance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.18-18
• /
• 2011

Climate change is impacting and will increasingly impact both the quantity and quality of the world's water resources in a variety of ways. In some areas warming climate results in increased rainfall, surface runoff, and groundwater recharge while in others there may be declines in all of these. Water quality is described by a number of variables. Some are directly impacted by climate change. Temperature is an obvious example. Notably, increased atmospheric concentrations of $CO_2$ triggering climate change increase the $CO_2$ dissolving into water. This has manifold consequences including decreased pH and increased alkalinity, with resultant increases in dissolved concentrations of the minerals in geologic materials contacted by such water. Climate change is also expected to increase the number and intensity of extreme climate events, with related hydrologic changes. A simple framework has been developed in New Zealand for assessing and predicting climate change impacts on water resources. Assessment is largely based on trend analysis of historic data using the non-parametric Mann-Kendall method. Trend analysis requires long-term, regular monitoring data for both climate and hydrologic variables. Data quality is of primary importance and data gaps must be avoided. Quantitative prediction of climate change impacts on the quantity of water resources can be accomplished by computer modelling. This requires the serial coupling of various models. For example, regional downscaling of results from a world-wide general circulation model (GCM) can be used to forecast temperatures and precipitation for various emissions scenarios in specific catchments. Mechanistic or artificial intelligence modelling can then be used with these inputs to simulate climate change impacts over time, such as changes in streamflow, groundwater-surface water interactions, and changes in groundwater levels. The Waimea Plains catchment in New Zealand was selected for a test application of these assessment and prediction methods. This catchment is predicted to undergo relatively minor impacts due to climate change. All available climate and hydrologic databases were obtained and analyzed. These included climate (temperature, precipitation, solar radiation and sunshine hours, evapotranspiration, humidity, and cloud cover) and hydrologic (streamflow and quality and groundwater levels and quality) records. Results varied but there were indications of atmospheric temperature increasing, rainfall decreasing, streamflow decreasing, and groundwater level decreasing trends. Artificial intelligence modelling was applied to predict water usage, rainfall recharge of groundwater, and upstream flow for two regionally downscaled climate change scenarios (A1B and A2). The AI methods used were multi-layer perceptron (MLP) with extended Kalman filtering (EKF), genetic programming (GP), and a dynamic neuro-fuzzy local modelling system (DNFLMS), respectively. These were then used as inputs to a mechanistic groundwater flow-surface water interaction model (MODFLOW). A DNFLMS was also used to simulate downstream flow and groundwater levels for comparison with MODFLOW outputs. MODFLOW and DNFLMS outputs were consistent. They indicated declines in streamflow on the order of 21 to 23% for MODFLOW and DNFLMS (A1B scenario), respectively, and 27% in both cases for the A2 scenario under severe drought conditions by 2058-2059, with little if any change in groundwater levels.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.4
• /
• pp.250-254
• /
• 2003

In this study, the IR drop theory was adopted to explain the initiation of crevice corrosion in the framework of IR drop in crevice electrolyte. Furthermore, the electrochemical polarization was measured to study the mechanism of crevice corrosion for type STS430 stainless steel. lest method adopts under condition that the size of specimen is $10\times20\times5mm,\;in\;1N\;H_2SO_4+0.1N\;NaCl$ solution, and the artificial crevice gap sizes are three kinds, the Micro capillary tube size is inner diameter 0.04 mm, outer diameter 0.08 mm. Crevice corrosion is measured under the applied voltage of passivation potential -200mV/SCE, resulted from anodic potentio-dynamic polarization to the external surface along the crevice. The potential difference was measured by depth profile by Micro capillary tube which inserted in the crevice. The obtained results of this study showed that 1) As artificial crevice gap size became narrow, the current density was increased, whereas no crevice corrosion was found in the crevice gap size $3\times0.5\times16mm\;in\;1N\;H_2SO_4+0.1N\;NaCl\;solution\;at\;20^{\circ}C$ 2) potential of the crevice was about from -220 to -358mV which is lower than that of external surface potential of -200mV The results so far confirmes that the potential drop(so-called IR drop) in the crevice is one of the major mechanisms the process of crevice corrosion for 430 stainless steel.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.18-27
• /
• 2010

In u-GIS environment, GeoSensor environment requires that dynamic data captured from various sensors and static information in terms of features in 2D or 3D are fused together. GeoSensors, the core of this environment, are distributed over a wide area sporadically, and are collected in any size constantly. As a result, storage space could be exceeded because of restricted memory in DSMS. To solve this kind of problems, a lot of related studies are being researched actively. There are typically 3 different methods - Random Load Shedding, Semantic Load Shedding, and Sampling. Random Load Shedding chooses and deletes data in random. Semantic Load Shedding prioritizes data, then deletes it first which has lower priority. Sampling uses statistical operation, computes sampling rate, and sheds load. However, they are not high accuracy because traditional ones do not consider spatial characteristics. In this paper 'Pre-Filtering based Post Load Shedding' are suggested to improve the accuracy of spatial query and to restrict load shedding in DSMS. This method, at first, limits unnecessarily increased loads in stream queue with 'Pre-Filtering'. And then, it processes 'Post-Load Shedding', considering data and spatial status to guarantee the accuracy of result. The suggested method effectively reduces the number of the performance of load shedding, and improves the accuracy of spatial query.

• Korean Journal of Community Nutrition
• /
• v.3 no.5
• /
• pp.729-738
• /
• 1998

In order to investigate the types of enteral nutrition formulas currently used in hospitals and evaluate and categorize the commercially prepared enteral nutrition formulas formulas available in the domestic market, we asked dietitians working in 6 hospitals in Seoul to complete the questionnaire and obtained compositional characteristics of 12 commercially prepared enteral nutrition formulas. The average proportion of patients receiving the commercially prepared enteral nutrition formulas(60.6%) was greater than that of patients receiving the in-hospital preparations(31.9%). In the group of patients receiving the in-hospital prepared formulas, the enteral feeding was mainly administered orally, whereas, in the group of patients receiving the commercially prepared formulas, tube feeding was the primary route of formula administration. In both groups, however, a greater proportion of patients received the formulas as total replacements of their meals and for the purpose of dietary supplementation. On the basis of major criteria for evaluation of the commercially prepared enteral nutrition formulas, the 6 products out of the 9 nutritionally complete products formulated for the purpose of dietary supplementation were grouped into the same category(standard protein, caloric density of 1kcal/ml, and tube/oral), so they were considered therapeutically comparable. However, the remaining 3 products were different in protein content(high protein) or route of administration(tube only). Of the 3 nutritionally complete products formulated specifically for the purpose of dietary therapy, 2 products were formulated for patients with renal disease, and the one product was formulated for diabetic patients. Therefore, the data in this study showed that the commercially prepared enteral nutriton formulas became an important part of the enteral nutrition for hospitalized patients in Korea, but the domestic market has not yet generated a wide variety of the formulas, not providing many choices for clinicians to manage the diets for their patients. The results of this study would be helpful for clinicians in choosing appropriate products for their patients, for manufactures in developing new products, and for regulatory authorities to establish the regulation for the broad group of heterogeneous products that are marketed and will be developed as medical foods. In addition, the process of maintaining the categories for evaluation of the commercially prepared enteral nutrition formulas should be dynamic because new products may not reasonably fit any of the existing categories.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.223-228
• /
• 2012

In this study, a fiber-optic pH sensor based on a pH sol-gel film is fabricated. The sol-gel film is made by co-polymerizing tetramethoxysilane, trimethoxymethylsilane, ethanol and distilled water. As a pH indicator, a neutral red is immobilized in a thin porous film formed by the sol-gel process. The pH change in a sensing probe gives rise to a change in the color of the pH sol-gel film, and the absorbance of reflected light through the pH sol-gel film is also changed. By using a spectrometer, therefore, the spectra of reflected lights in the sensing probe with different pH values are measured. Also, the relationships between the pH values and the absorbance are analyzed on the basis of the color variations of the pH sol-gel films. In repeated experiments, the fiber-optic pH sensor shows that it has reversibility, a high reproducibility and a wide absorbance change in a pH range from pH 5 to 9. Also, we confirmed that the fabricated pH sol-gel film exhibits a fast response time, little or no pH indicator leaching and a dynamic range of 2.04 dB from pH 5 to 9. Based on the results of this study, a fiber-optic pH sensor can be developed for the pH monitoring in the harsh environments.