• 한국군사과학기술학회지
• /
• 제22권3호
• /
• pp.332-340
• /
• 2019

Electronic warfare systems are needed to be advantageous in the modern war. Many radar threat signals with various frequency spectrums and complicated techniques exist. For detecting the threats, a receiver with wide and narrow-band digital processing is needed. To process a wide-band searching mode, a polyphase filter bank has become the architecture of choice to efficiently detect threats. A polyphase N-path filter aligns the re-sampled time series in each path, and a discrete Fourier transform aligns phase and separates the sub-channel baseband aliases. Multiple threats and CW are detected or rejected when the signals are received in different sub-channels. And also, to process a narrow-band precision mode, a direct down converter is needed to reduce aliasing by using a decimation filter. These digital logics are designed in a FPGA. This paper shows how to design and develop a wide and narrow-band digital receiver that is capable to detect the threats.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.359-366
• /
• 2012

This is the final one of the two companion papers dealing with accuracy of accumulated fatigue damage estimation under wide band process. It is stated that four kinds of wide band models exist: typed of equivalent stress, combined PDF, correction factor, and damage combination. For the idealized ESDs from full scale measurement data on an 8100TEU container vessel, fatigue damages are compared for a narrow band prediction model based on Rayleigh PDF and five wide band fatigue prediction models of Dirlik, Wirsching-Light, Jiao-Moan, Benasciutti and DNV. DNV model consistently overestimates fatigue damages regardless of variation of ESDs. Predictions by Jiao-Moan model, which is understood as standard method for design of offshore platforms, are also in conservative side. Best accuracy is found from the results by Dirlik and Benasciutti models, but Benasciutti model is preferred since it can easily combined with narrow band fatigue damage based on Rayleigh PDF.

• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.98-103
• /
• 2015

Power plant is that very high reliability when industrial and economic impact on the overall electric power system is required, it is essential to improve the reliability, especially the fault prediction diagnosis. Since an accident caused by the partial discharge in the power plant is above state has a faster response characteristic than the other indications in the case of any, the partial discharge generated in the power plant immediately detect the deterioration of insulation due to the accident of the power plant and the non-drawn It should prevent or reduce. Partial Discharge Measuring Systems for UHV SF6 Gas Insulated Switchgear and power transformer on site installed has some probability of abnormal recognition in case of non-flexible deal with on site noise. Many methode to eliminate these kinds of noises, UHF Detection System is chosen as purchase description in Korea, but this system having a bandwidth between 500MHz 1.5GHz wide band. Initial install periods(about 20 years ago), this band had no strong signal source, but in these days this wide band have strong signals, such as LTE. So, module described in this paper is designed as simultaneously use with wide and narrow band for solve this noise problem, and introduce this system.

• 전자공학회논문지
• /
• 제50권12호
• /
• pp.197-204
• /
• 2013

본 논문에서는 주파수 영역에서 협대역 신호를 광대역으로 확장하는 새로운 인공 대역 확장 기술을 제안한다. 제안한 기술은 협대역 신호를 여기 신호와 스펙트럼 포락선 성분으로 분리하고, 주파수 영역에서 각각 독립적인 방법으로 확장한다. 여기 신호는 저대역의 하모닉 구조가 고대역에서 유지되도록 확장하고, 스펙트럼 포락선은 부대역별 에너지를 기반으로 NMF방법으로 확장한다. 마지막으로 시간 축에서 프레임 사이의 상관관계를 기반으로 스펙트럼 위상을 결정하여 최종 광대역 신호를 생성한다. 주관적 청취 평가를 통하여 제안한 방법으로 대역 확장된 신호가 원 협대역 신호보다 음질이 향상된 것을 확인하였다.

• Wind and Structures
• /
• 제9권4호
• /
• pp.255-270
• /
• 2006

Several analytical procedures available in literature, for the evaluation of wind induced fatigue damage of structures, either assume the wide band random stress variations as narrow band random process or use correction factors along with narrow band assumption. This paper compares the correction factors obtained using the Rainflow Cycle (RFC) counting of the measured stress time histories on a lamp mast and a lattice tower, with those evaluated using different frequency domain methods available in literature. A Bi-modal spectral method has been formulated by idealising the single spectral moment method into two modes of background and resonant components, as considered in the gust response factor, for the evaluation of fatigue of slender structures subjected to "along-wind vibrations". A closed form approximation for the effective frequency of the background component has been developed. The simplicity and the accuracy of the new method have been illustrated through a case study by simulating stress time histories at the base of an urban light pole for different mean wind speeds. The correction factors obtained by the Bi-modal spectral method have been compared with those obtained from the simulated stress time histories using RFC counting method. The developed Bi-modal method is observed to be a simple and easy to use alternative to detailed time and frequency domain fatigue analyses without considerable computational and experimental efforts.

• 대한토목학회논문집
• /
• 제6권2호
• /
• pp.85-91
• /
• 1986

심해나 해상조건이 나쁜 지점에서 운영될 해양구조물의 설계시에는 파랑하중에 대한 구조물의 피로수명예측이 매우 중요하다. 본 논문에서는 랜덤파랑하중에 의해 해양구조물에 발생되는 응력의 bandwidth가 구조물의 피로수명예측 결과에 주는 영향에 대하여 연구하였다. 구조물의 동적거동해석은 비선형 점성저항력의 선형화를 통한 주파수영역해법을 사용하여 수행되었으며, 랜덤응력스펙트럼을 구하고 이를 바탕으로 피로해석을 수행하였다. 피로손상의 예측을 위한 랜덤응력 cycle의 산정은 narrow band cycle 산정법과 함께 wide band process 에 대하여 더 적정한 rainflow cycle 산정법을 사용하였다. 수심이 다른 지점에 위치한 2개의 구조물을 택하여 예제해석을 수행하였으며, 두 응력 cycle 산정법에 의해 얻은 피로해석 결과들을 비교하고 응력의 bandwidth의 영향을 분석하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.316-319
• /
• 1998

RPWM(Random Pulse Width Modulation) is a switching technique to spread the voltage and current harmonics on the wide frequency area. Using randomly changed switching frequency of the inverter, the power spectrum of the electromagnetic acoustic noise cab be spread to the wide-band area. The wide-band noise is much more comfortable and less annoying than the narrow-band one. So RPWM have been attracting an interest as an excellent method for the reduction of acoustic noise on the inverter drive system. In this paper a new RPPWM (Random Position PWM) is proposed and implemented. Each of three pulses is located randomly in each switching interval. Along with the randomization of PWM pulses, the space vector modulation is executed in the C167 microcontroller also. The experimental results show that the voltage and current harmonics were spread to wide band area and that the audible switching noise was reduced by proposed RPPWM method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.119-123
• /
• 2003

본 논문에서는 광대역 무선통신에서 협대역 간섭을 제거할 수 있는 새로운 OFDM(Orthogonal frequency Division Multiplexing) 방식인 IS(Interference Suppressing)-OFDM을 소개한다. 이 IS-OFDM 방식은 직교 Hadamard 계열을 이용하여 분리할 수 있는 여러 단의 기존 OFDM의 병렬 연결로 구성되는 시스템으로 각 서브 캐리어는 전송된 모든 심볼을 포함하며 수신측에서는 동일 서브 캐리어에 존재하는 서로 다른 심볼들을 직교 Hadamard 계열을 이용하여 복조되도록 한다. IS-OFDM 시스템의 성능을 분석하고, 검토하기 위하여 Monte-Carlo 시뮬레이션을 이용하여 협대역 채널 환경에서 기존 OFDM 시스템과 비교하였으며 성능 개선 효과가 있음을 보였다.

• 전자공학회논문지B
• /
• 제32B권1호
• /
• pp.127-135
• /
• 1995

The diffusion neural network forms a Gaussian distribution by transferring an excitation to the surround. A DOG(difference of two Gaussians) is obtained by the diffusion neural network. This type of the DOG, which can detect the intensity changes of an image, has the same shape as a LOG(Laplacian of a Gaussian:${\Delta}^2$G) and narrow band pass characteristics. In this paper we show that another type of the DOG which has a very narrow Gaussian for the excitatory and a very wide Gaussian for the inhibitory, can be formed by the diffusion process of this network, This type of the DOG has a wide band width in spatial frequency domain and can be used efficiently in detecting special type of edges.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.208-213
• /
• 2004

Methods for estimation of the effective stress intensity factor range (${\Delta}K_{eff}$) are evaluated for narrow and wide band random loading crack growth test data of 2024-T351 aluminum alloy. Three methods of determining $K_{op}$, visual measurement, ASTM offset compliance method, and the neural network method proposed by Kang and Song, and three methods of estimating ${\Delta}K_{eff}$, conventional, the 2/PI0 and 2/PI methods proposed by Donald and Paris, are compared in a quantitative manner by using the results of fatigue crack growth life prediction under random loading. For all $K_{op}$ determination methods discussed, the 2/PI0 and 2/PI methods of estimating ${\Delta}K_{eff}$ provide better results than conventional method for narrow and wide band random loading data.