• Structural Engineering and Mechanics
• /
• 제57권6호
• /
• pp.989-1014
• /
• 2016

This paper deals with the analysis of the natural frequencies, mode shapes of an axially loaded beam system carrying ends consisting of non-concentrated tip masses and three spring-two mass sub-systems. The influence of system design and sub-system parameters on the combined system characteristics is the major part of this investigation. The effect of material properties, rotary inertia and shear deformation of the beam system is included. The end masses are elastically supported against rotation and translation at an offset point from the point of attachment. Sub-systems are attached to center of gravity eccentric points out of the beam span. The boundary conditions of the ordinary differential equation governing the lateral deflections and slope due to bending of the beam system including developed shear force frequency dependent terms, due to the sub.system suspension, have been formulated. Exact formulae for the modal frequencies and the modal shapes have been derived. Based on these formulae, detailed parametric studies are carried out. The geometrical and mechanical parameters of the system under study have been presented in non-dimensional analysis. The applied mathematical model is presented to cover wide range of mechanical, naval and structural engineering applications.

• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.18-26
• /
• 2004

지하공사비는 전체공사비를 결정짓는 중요한 요소로서 일반적으로 동일한 층고의 지상공사비의 2${\~}$2.5배에 해당한다. 본 연구에서 지하주차장 층고를 대폭적으로 감소할 수 있는 일방향 슬래브 구조도와 최소깊이 U형보를 제안하였다. 최적설계에 의해 제안된 U형보는 기존의 직사각형 단면보다 보깊이를 최소 12${\~}$34cm 까지 감축이 가능할 것으로 예상된다. 본 연구에서 두 개의 대표적인 실물크기 U형보를 실험하였다. 이 실험에서 U형보는 설계하중과 공칭강도를 상회하는 휨강도에서 최종 파괴되었다. 그러나 토핑콘크리트가 굳기전 단순지지 상태에서 시공 하중에 의한 휨균열이 발생할 가능성이 있는 것으로 판단되었으므로 보중앙에 가설 시공지주를 사용하는 것이 요구된다.

• 한국통신학회논문지
• /
• 제33권10B호
• /
• pp.911-918
• /
• 2008

본 논문에서는 방향성 안테나를 이용하여 3섹터 구조를 갖는 Narrow-Beam Trisector Cell (NBTC)과 Wide-Beam Trisector Cell (WBTC) 구조의 WiBro 시스템에 IEEE802.16j 기반의 멀티홉 중계기를 도입하여 커버리지를 확장하는 새로운 형태의 NBTC와 WBTC 구조를 제안한다. 제안한 구조는 최적화 모델을 통해 트래픽 분포에 따른 최적 배치된 기지국과 멀티홉 중계기의 수, 각 기지국의 확장되는 커버리지, 그리고 설치비용 등을 기지국만 배치하는 기존의 전형적인 구조와 비교 분석하였다. 분석 결과를 통해 주어진 전체면적에 중계기를 효율적으로 배치한다면 절약되는 설치비용을 알 수 있었고, 제안하는 멀티홉 중계기가 도입된 NBTC와 WBTC 방식 중에서 트래픽 분포가 높은 지역에서는 WBTC 방법을 이용하고, 트래픽 분포가 적은 지역에서는 NBTC 방법을 이용한다면 커버리지 확장과 설치비용 절약 측면에서 보다 효율적임을 알 수 있었다.

• 한국통신학회논문지
• /
• 제34권2B호
• /
• pp.170-177
• /
• 2009

본 논문에서는 본 논문에서는 BS(Base Station, 기지국)와 RS(Relay Station, 중계기)가 지향성 안테나를 갖는 multi-tier 기반의 NBTC (Narrow-Beam Trisector Cell)와 WBTC (Wide-Beam Trisector Cell) 구조를 제안하고, 두 시스템에서 동일 채널 간섭 (Co-channel interference)에 의한 용량을 두 개의 채널 모델을 적용하여 분석하였다. 분석을 통해 $2^{nd}$ tier로 구성한 한 클러스터에서 발생하는 총 용량은 LOS(Line of Sight)의 존재 여부에 따라 NBTC 구조 셀과 WBTC 구조 셀의 총 용량이 달라짐을 알 수 있었다. 본 논문의 결과는 향후 차세대 이동통신 및 와이브로 시스템에서 간섭을 고려한 멀티 홉 RS 도입 시에 참고할 만한 가이드라인을 제시할 수 있을 것이다.

• Structural Engineering and Mechanics
• /
• 제84권3호
• /
• pp.311-321
• /
• 2022

In the buildings with long spans and high floors, such as logistics warehouses and semiconductor factories, it is difficult to install supporting posts under beams during construction. Therefore, the size of structural members becomes larger inevitably, resulting in a significant increase in construction costs. Accordingly, a prestressed hybrid wide flange (PHWF) beam with hollowed steel webs was developed, which can reduce construction costs by making multiple openings in the web of the steel member embedded in concrete. However, since multiple openings exist and prestress is introduced only into the bottom flange concrete, it is necessary to identify the shear resistance mechanism of the PHWF beam. This study presents experimental shear tests of PHWF beams with hollowed steel webs. Four PHWF beams with cast-in-place (CIP) concrete were fabricated, with key variables being the width and spacing of the steel webs embedded in the concrete and the presence of shear reinforcing bars, and web-shear tests were conducted. The shear behavior of the PHWF beam, including crack patterns, strain behavior of steel webs, and composite action between the prestressed bottom flange and CIP concrete, were measured and analyzed comprehensively. The test results showed that the steel web resists external shear forces through shear deformation when its width is sufficiently large, but as its width decreased, it exerted its shear contribution through normal deformation in a manner similar to that of shear reinforcing bars. In addition, it was found that stirrups placed on the cross section where the steel web does not exist contribute to improving the shear strength and deformation capacity of the member. Based on the shear behavior of the specimens, a straightforward calculation method was proposed to estimate the web-shear strength of PHWF beams with CIP concrete, and it provided a good estimation of the shear strength of PHWF beams, more accurate than the existing code equations.

• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.160-164
• /
• 2005

자동차 번호판 자동인식에서 어두운 조명에서나 날씨가 좋지 않을 경ㅇ 차량의 형상이 왜곡 될 수 있고, 번호판을 식별하는데 어려움이 있다. 이에 본 논문에서는 움직이는 차량의 영상에서 흔들림이 없고, 밝은 햇빛에서 어두운 조명상태까지의 다양한 환경을 수용할 수 있는 자동차 번호판 인식방법을 제안하였다. 제안한 방법은 투시광선을 서로 다른 세기를 갖는 두 개의 빔(beam)으로 분리한 다음 CCD 카메라를 사용하여 두 개의 포착된 이미지를 조합하여 물체가 움직일 때도 동요 없는 이미지를 산출하였다. 실험결과로써 466 개의 움직이는 차량영상을 이용한 결과 98.7%의 인식률을 얻을 수 있었다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.91-94
• /
• 1999

A new type of high-T$_c$ superconducting Josephson junctions has been prepared by Ar ion beam etching and electron beam lithography. YBa$_2Cu_3O_{7-x}$ (YBCO) films deposited on (001) SrTiO$_3$ single crystal substrate by pulsed laser deposition were patterned by Ar ion milling with photolithography. The narrow slit with a electroresist mask, about 1000 ${\AA}$ wide, was constructed over a 3 ${\sim}$ 5 ${\mu}$m bridge of a 1200-${\AA}$-thick YBCO film by electron beam lithography. The slit was then etched by the Ar ion beam to form a damaged 600-${\AA}$-thick YBCO. Thus prepared structure forms an S-N-S (YBCO - damaged YBCO - YBCO) type Josephson junctions. Those junctions exhibit RSI-like I-V characteristics at 77 K. The properties of the Josephson junctions such as I$_c$ R$_N$, and J$_c$ were characterized.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.581-584
• /
• 2008

A generation of a particle beam is the key technique in a flow cytometry that measures the fluorescence and light scattering of individual cell and other particulate or molecular analytes in biomedical research. Recent methods performing this function require a laborious and time-consuming assembly. In the present work, we propose a novel device for the generation of an axisymmetrical focusing beam of microparticles (3-D focusing) in a single capillary without sheath flows. This work uses the concept that the particles migrate toward the centerline of the channel when they lag behind the parabolic velocity profile. Particle focusing of spherical particles was successfully made with a beam diameter of about 10 ${\mu}$m. Proposed device provides crucial solutions for simple and innovative 3-D particle focusing method for the applications to the MEMS-based micro-flow cytometry. We believe that this device can be utilized in a wide variety of applications, such as biomedical/ biochemical engineering.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2812-2818
• /
• 1996

A cantilever beam with a mass and a spring at the end can be use to model a miniature flexible arm. It is necessary to know the natural frequencies and mode shapes to discuss its free vibration, especially when modal analysis is employed. A beam is clamped-free. In this paper we look at the lateral vibration of beams that have step changes in the properties of their cross sections. The frequency equation is derived by Bernoulli-Euler formulation and is sloved by the separation of variable. The parameters of the beam, 'mass and spring stiffness' are defined as nondimensionalized parameters for wide application of the results. According to the change of eigenvalues and mode shape are presented for this beam. The results presented are the eigenvalues and the natural frequencies for the first three modes of vibration. Results show that the parameters have a significant effect on the natural frequency.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.98-99
• /
• 2012

Deposition of thin films using magnetron sputtering plasmas is a well-developed, classical technology. However, detailed investigations using advanced diagnostics are insufficient in magnetron sputtering, in comparison with plasma-aided dry etching and plasma-enhanced chemical vapor deposition. In this talk, we will show examples of diagnostic works on magnetron sputtering employing metal targets. Diagnostic methods which have fine spatial resolutions are suitable for magnetron sputtering plasmas since they have significant spatial distributions. We are using two-dimensional laser-induced fluorescence spectroscopy, in which the plasma space is illuminated by a tunable laser beam with a planer shape. A charge-coupled device camera with a gated image intensifier is used for taking the picture of the image of laser-induced fluorescence formed on the planer laser beam. The picture of laser-induced fluorescence directly represents the two-dimensional distribution of the atom density probed by the tunable laser beam, when an intense laser with a relatively wide line-width is used. When a weak laser beam with a relatively narrow linewidth is used, the laser-induced fluorescence represents the density distribution of atoms which feel the laser wavelength to be resonant via the Doppler shift corresponding to their velocities. In this case, we can obtain the velocity distribution function of atoms by scanning the wavelength of the laser beam around the line center.