• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.68-78
• /
• 1997

A numerical study on the transient vapor flow and heat transfer is performed to investigate the ideal switching operation of heat source in a high temperature heat pipe. The cylindrical 2-dimensional compressible laminar vapor flow is assumed for the vapor space and the conjugate heat transfer for the heat pipe wall, wick and vapor space is calculated. The different boundary conditions such as constant heat flux, convective or radiative boundary at the outer wall are used respectively to compare the influence of boundary conditions on the transient operation. The transient temperature profile and the internal flow of the entire pipe for the switching operation are described as a result. The results show that the transient time is not significantly affected by the boundary conditions at the outer wall in present study. During the transition, two independent flows are observed temporarily on the right side and left side of the heat pipe. It is also found that the trend of temperature variation in the vapor region is different from the variation in the wick and wall region.

• 한국지반공학회지:지반
• /
• 제13권3호
• /
• pp.5-20
• /
• 1997

본 연구에서는 유한변형률 이론에 근거하여 3차원 압밀 지배 방정식을 유도하였다. 이 방정식은 비교적 압밀층의 두께가 두꺼운 경우, 비선형 물성치, 공극비에 따른 비선형 투수계수를 갖는 지반에 적합하다. 기존의 유한차분 수치해석 기법(FTCS)은 지배 방정식이 비선형 이며 복잡한 경우 안정된 해를 얻을 수 없기 때문에 본 연구에서는 특수 유한 차분 기법을 도입하였다. 이 수치해석 기법을 지배 방정식에 적용하면 시간에 따른 압밀량을 예측할 수 있다. 본 해석기법에 의해 구해진 값들을 윅드레인을 설치한 여러 가지 고압축성 토질에서의 실험 결과와 비교한 결과, 최종 압밀량과 시간에 따른 압말량이 잘 일치하고 있다.

• 대한기계학회논문집
• /
• 제9권1호
• /
• pp.47-55
• /
• 1985

본 논문에서는, 긴 단열부를 갖는 열파이프에 있어서, 단열부에 유동저항이 매우 작은 접힌판재의 그루우브 wick를 넣은 구조에 대한 이론적, 실험적 연구를 다 루었다. 본 논문의 목적은, 위에서 설명한 열파이프의 근본적인 상반기능을 해결해 줄 수 있는 하나의 열파이프 구조를 제공할 뿐만 아니라, 더 나아가 접힌 판재의 그루 우브라는 새로운 형태의 wick의 가능성을 암시하는 데 있는 것이다.

• 태양에너지
• /
• 제9권2호
• /
• pp.31-41
• /
• 1989

The purpose of this research is to study the utility of prediction program like a F.E.M. analysis for energy recovery of heat exchanger with heat pipe which uses arbitrary groove wick. The program is based on the utility by the experimental and applytical method of the single heat pipe. It is also expanded and applied in the prediction program of the heat exchanger. The results are as follows; 1) The effective thermal conductivity of the groove wick with arbitrary shape is counted by the thermal resistance change. 2) The more the number of rows, the more the effect energy recovery changing by the number of rows, the bigger the free velocity, the smaller the effect of energy recovery. 3) The effect of energy recovery increases according to the value of the rate of mass flow (Me/Mc) and also number of rows. 4) The comparison between calculated and data shows good agreement within 2.5% error, therefore the F.E.M. analysis of the study is useful to predict the performance of heat pipe-heat exchanger.

• 열처리공학회지
• /
• 제22권3호
• /
• pp.162-168
• /
• 2009

A horizontal tube furnace with a wide uniform-temperature zone was developed using isothermal characteristics of a heat pipe. The heat pipe heating system consists of a concentric annular shaped stainless-steel container, sodium as a working fluid and a screen mesh wick structure. The performance test of the heat pipe revealed that temperature changes along seven consecutive positions of the heat pipe outer wall were less than${\pm}0.1^{\circ}C$, thereby ensuring the high isothermal property. The isothermal property of the heat pipe-adapted tube fumace was investigated and compared to a conventional non-heat pipe type tube furnace. The temperature distribution measurement showed that the uniform temperature zone, in which temperature change is less than${\pm}$1$^{\circ}$C, of the heat pipe employed tube furnace system was about three times longer compared to the conventional tube furnace system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.175-180
• /
• 2008

This paper is dedicated to the development of cooling devices such as mLHP with Fan-Fin system limited by noise and vibration. As we know, Heat pipe has the limitation of cooling capability to cool down the electronics. It is bounded by capillary and thermal limitation but heat load that it has to deal with is increasing. Especially Today's electronic technology has a tendency to integrate lots of function into the small piece of a processor like Dual core having 35W heat load for mobile and desktop computer respectively. There is an optimum operating condition of temperature, below $70^{\circ}C$, during the maximum heat load, 35W. There is the motivation needed to develop the new type of cooling devices and we can discuss about the new challenge beyond heat pipe.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권2호
• /
• pp.79-86
• /
• 2004

An analytical and experimental study has been conducted to determine the optimal charging mass of working fluid for the maximum heat transport capacity of heat pipe with axially grooved wick. When the heat pipe is operated in a steady state, the liquid-vapor meniscus recession of working fluid to the bottom of groove is occurred in the evaporator region. In this work, the optimal charging mass of working fluid was obtained by considering the meniscus recession from the axial variation of capillary pressure, the radius of curvature and wetting angle of meniscus of liquid-vapor interface. Experimental results were also obtained by varying the charging mass of working fluid within a heat pipe, and presented for the trend of maximum heat transport capacity corresponding to the operating temperature and the elevation of heat pipe. Finally, the analytical results of the optimal charging mass of working fluid were compared with those from the experiment, both of which were in good agreement with each other.

• 설비공학논문집
• /
• 제17권12호
• /
• pp.1139-1144
• /
• 2005

This study has been performed to investigate the thermal performance of variable conductance heat pipe (VCHP) with meshed wick. The length of condenser portion in a VCHP is varied by the expansion of inert gas with the operation temperature, and the heat transport capacity is thus varied with the operating temperature. In this study, numerical evaluation of the VCHP is made for the thermal performance of VCHP, based on the diffusion model of inert gas. Water is used as a working fluid and nitrogen as a control inert gas in the copper tube. As a result, the thermal performance of VCHP has been compared with that of constant conductance heat pipe (CCHP) according to the variation of operation temperature. Maximum heat transport capacity of VCHP is mainly presented for operation temperature and the variation of operation temperature is also presented for heat transfer rate of VCHP.

• 아시안잔디학회지
• /
• 제16권1호
• /
• pp.1-10
• /
• 2002

Creeping bentgrass 'Penn-Al', Perennial ryegrass 'Palmer ll', Kentucky bluegrass 'Nassou', Tall fescue 'Boonsai 2000'의 생육에 대한 칼슘의 영향을 온실에서 조사하였다. Creeping bentgrass 'Penn-Al', Kentucky bluegrass 'Nassou'와 Tall fescue'Boonsai 2000'의 shoot 생육은 Ca 4.0me/L에서, Perennial ryegrass 'Palmer II'는 Ca 2.0me/L.에서 가장 양호하였다. Creeping bentgrass 'Penn-Al', Perennial ryegrass 'Palmer II'와 Kentucky bluegrass 'Nassou'의 뿌리생육은 Ca 1.0me/L, Tall fescue'Boonsai 2000'는 Ca 4.0me/L에서 가장 양호하였지만 처리간에 큰 차이는 없었다. Creeping bentgrass 'Penn-Al'와 Kentucky bluegrass 'Nassou'의 분얼수는 Ca 4.0me/L., Perennial ryegrass 'Palmer II'는 Ca 1.0me/L에서 가장 많았으며, Tall fescue 'Boonsai 2000'의 분얼수는 Ca 4.0me/L에서 가장 많았지만 처리간 유의성은 없었다. 식물체 내 무기성분 함량은 Ca 처리 농도가 높을수록 Ca 함량이 많았고, 반대로 Mg 함량은 감소하였으며, Fe는 Ca 4.0me/L까지는 함량이 증가하였고, N, P, K, Zn는 큰 영향이 없었다. 식물 영양실험에 있어서 심지화분의 이용성은 정확도와 간편성이 탁월하여 앞으로의 연구에 많이 적용될 수 있음을 확인하였다.

• 대한수학회지
• /
• 제35권3호
• /
• pp.527-538
• /
• 1998

We study on kernel operators (Wick monomials) on symmetric Fock space. We give optimal conditions on kernels so that the corresponding kernel operators are densely defined linear operators on the Fock space. We try to formulate our results in the framework of white noise analysis as much as possible. The most of the results in this paper can be extended to anti-symmetric Fock space.