• Journal of Mechanical Science and Technology
• /
• 제16권2호
• /
• pp.175-181
• /
• 2002

A new polariscope system involving two rotating optical elements and a digital camera for whole field fringe analysis allows automated data to be acquired quickly and efficiently. The developed phase measuring technique that uses eight images through a circular polariscope is presented for the digital measurement of isochromatics and isoclinics, respectively, from photoelastic fringes in a circular disk under diametric compression. Isochromatics can directly be obtained using wrapped isoclinic phases calculated by the arc tangent operator which is the four-quadrant operator from -$\pi$ to $\pi$. It is not required to unwrap isoclinic phases for the calculations of isochromatics. Unwrapped isoclinics are directly determined from isochromatic parameters. Distributions of digitally determined isoclinics are in close agreement to manual measurements. The errors which would appear in unwrapping process of isoclinics can be avoided in the determination of isochromatics.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.59-65
• /
• 2007

This study is to propose the basic data for deciding remodeling of wornout educational facilities. In order of it, the indoor environmental standard, the actual conditions of thermal environment and sound insulation of walls were examined through field measurement in the subjected open elementary school(J school) and modernization model of elementary school(Y school) which they are located in Seoul. As the result, standard for indoor environmental factors of educational facilities which is established by Ministry of Education is not subdivided into indoor environmental performances considering usages and characteristics of classrooms for comfortable indoor environment. The vertical temperature difference in general classroom and in open classroom showed to be $11.2^{\circ}C$ and $12.1^{\circ}C$ respectively, while indoor temperature of special classroon was, on the whole, higher than that of any other classroom due to its specific heat flux of wall materials. The sound insulation performance of the masonry brick wall of classroom satisfied the minimum standard of AIJ, Architectural Institute of Japan, in the open elementary school and the modernization model of elementary school. That is to say, the movable partition wall between the classroom and the corridor disturbed students in their class in the open school.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.125-128
• /
• 2004

Chemical Mechanical Polishing(CMP) in semiconductor production is characterized its output property by Removal Rate(RR) and Non-Uniformity(NU). Some Previous works shows that RR is determined by production of pressure and velocity and NC is also largely affected by velocity of flow-field during CMP. This study is about the direct measurement of velocity of slurry during CMP and reconstruction whole flow-field by Particle Image Velocimetry(PIV) Techniques. Typical PIV system is tuned adequately for inspecting CMP and Slurry Flow-field is measured by changing both Pad RPM and Carrier RPM. The results show that velocity is majorly determined not by Carrier RPM, but by Pad RPM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.239-242
• /
• 2001

Electronic Speckle Pattern Interferometry(ESPI) was proposed in the 1970's as a method of producing the interferogram without using traditional holographic technique. ESPI is more faster than Holography method, because the interferometric image is recorded and updated by the video camera every 1/30 second and whold-field inspection possibly. In this study using a non-contact optical technique that is suited for in-plane and out-of-plane deformation measurement. Thin plate with crack was analyzed by ESPI to determine the characteristics of vibration mode shape and natural frequency. Also, results of the experiment were compared with Finite Element Method(FEM).

• 한국전자파학회논문지
• /
• 제28권3호
• /
• pp.246-249
• /
• 2017

본 논문에서는 저항 부하를 갖는 소형 다이폴을 이용하여 3축 등방성 전기장 측정 프로브를 설계하였다. 특히, 상용 저항소자와 PCB를 이용함으로써 상용화에 장점이 있다. 설계된 전기장 측정 프로브는 저항 부하로 인한 광대역 특성으로 100 kHz에서 3 GHz까지의 광대역 특성을 갖는다. 제작 결과 광대역에 걸쳐 ${\pm}0.39dB$ 이내의 등방성 특성, 0.1 V/m의 수신감도 특성, 3 dB 이내의 주파수 응답 특성을 얻었다. 특히 250 kHz에서 3 GHz까지의 주파수 응답 특성은 ${\pm}1.4dB$의 우수한 특성을 보여 기존 전기장 프로브에 비해 우수한 특성 개선을 보였다.

• 복식
• /
• 제55권5호
• /
• pp.55-64
• /
• 2005

The concern with three-dimensional measurement has been growing in recent years. And over the last few years, several studies have been made on three-dimensional measurement. Some of the studies using a three-dimensional measurement have focused on type of form of human body and evaluation of fitness. But there has been no study about applications of three-dimensional measurement system for shape analysis. So, the purpose of this study was to investigate about application of three-dimensional mea-surement system lot shape analysis. The instrument and tools for three-dimensional measurement was Whole Body 3D scanner(model name: Exyma-WBS2H). Analysis program used in experiment is Rapid Form 2004 PPI (INUS technology, Int, Korea). The following results were obtained; 1. The point data using three-dimensional measurement system built 3D model. 2. The three-dimensional data were used to analyze length and curvature of shape. 3. The shape using three-dimensional measurement system could be used in variety field.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권4호
• /
• pp.10-13
• /
• 2005

Transport current and magnetic field which is generated by transport current make AC current - AC mag-netic field condition(AC-AC condition) in AC power application system using HTS tape. Therefore, characteristics of AC loss under the AC-AC condition are necessary to estimate AC loss of power device with accuracy such as HTS transformer. In this paper, we researched transport current loss, magnetization loss by perpendicular magnetic field and total loss which is represented as summation of both losses under the AC-AC condition in single HTS tape. As a result, magnetization loss showed increasing behavior under 65mT and decreasing behavior upper 65mT by influence of transport current. Transport current loss was increased continuously through out whole measurement ranges in the AC-AC condition. Total loss in HTS tape was dominated entirely by magnetization loss.

• Smart Structures and Systems
• /
• 제30권3호
• /
• pp.273-286
• /
• 2022

In recent years, vision-based monitoring has received great attention. However, structural identification using vision-based displacement measurements is far less established. Especially, simultaneous identification of structural systems and unknown excitation using vision-based displacement measurements is still a challenging task since the unknown excitations do not appear directly in the observation equations. Moreover, measurement accuracy deteriorates over a wider field of view by vision-based monitoring, so, only a portion of the structure is measured instead of targeting a whole structure when using monocular vision. In this paper, the identification of structural system and excitations using vision-based displacement measurements is investigated. It is based on substructure identification approach to treat of problem of limited field of view of vision-based monitoring. For the identification of a target substructure, substructure interaction forces are treated as unknown inputs. A smoothing extended Kalman filter with unknown inputs without direct feedthrough is proposed for the simultaneous identification of substructure and unknown inputs using vision-based displacement measurements. The smoothing makes the identification robust to measurement noises. The proposed algorithm is first validated by the identification of a three-span continuous beam bridge under an impact load. Then, it is investigated by the more difficult identification of a frame and unknown wind excitation. Both examples validate the good performances of the proposed method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.402-406
• /
• 1995

The shadow moire is one the optical techniques which able to give contour lines of an object with respect to a master grating plane. The moire patterns are issued from the superposition of a grating and its shadow projected on the surface of an object. But in the conventional shadow moire method the reference grating and deformed grating are mutually dependent, it is impossible to obtain uniform phase shifts on the whole field by moving the reference grating. Here we propose ane trial to apply phase shifting to conventional shadow moire. When, in the conventional arrangement, Phase-shifting that is sctually constant regardless of fringe orders is achieved by moving the grating and the light source. Finally we obtained a better result by using this procedure and applied the phase shifting shadow moire to three dimensional measurement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.96-100
• /
• 1997

The shadow moire is one of the optical techniques which is able to give contour lines of an object with respect to a master grating plane. The moire patterns are issued from the superposition of a master grating and its shadow projected on the surface of an object. In case of the classical shadow moire method, the sensitivity was a few tenths millimeters. generally, it is difficult to use a phase shift method in shadow moire because it is impossible to obtain uniform phase shifts on the whole field. But in this study we use the fact that if the depth of object is much less than the distance between the observer and the master grating, and the object is displaced perpendicularly to the grating plane, phase shifts are almost uniform. Finally we obtained a better resolution by using a phase shift procedure and applied the phase shifting shadow moire to three dimensional shape measurement.