Browse > Article
http://dx.doi.org/10.5515/KJKIEES.2017.28.3.346

3-Axial Isotropic Electric-Field Probe Design with Resistor-Loaded Short Dipole  

Moon, Sung-Won (Sysdyne)
Jang, Byung-Jun (Department of Electronic Engineering, Kookmin University)
Publication Information
The Journal of Korean Institute of Electromagnetic Engineering and Science / v.28, no.3, 2017 , pp. 246-249 More about this Journal
Abstract
In this paper, we designed the 3-axis isotropic electric-field measurement probe using resistor-loaded short dipole with lumped chip resistors. The designed probe shows good isotropic characteristics as well as wideband and low sensitivity. The isotropic characteristics of ${\pm}0.39dB$ from 100 kHz to the 3 GHz band were derived and the reception sensitivity was 0.1 V/m. The frequency response is within 3 dB of the whole section, especially ${\pm}1.3dB$ from 150 kHz to 3 GHz, which is superior to the conventional electric field probe with short dipoles.
Keywords
Triaxial Isotropic Probe; Short Dipole; Electric-Field Strength Measurement; Resistor Loading;
Citations & Related Records
연도 인용수 순위
  • Reference
1 김혁제, 박동철, 이애경, 심환우, "소형 이극안테나를 이용한 전계강도 프로브의 설계 및 제작", 한국전자파학회논문지, 6(1), pp. 3-9, 1995년 3월.
2 김윤명, 이승배, 김기회, "전자파비흡수율(SAR) 측정용 전기장 프로브의 검파 전압 특성", 한국전자파학회논문지, 16(2), pp. 217-221, 2005년 2월.
3 K. Kalyanasundaram, K. Arunachalam, "A low cost broadband probe for electric field measurement", Proceeding of NDE2011, Dec. 2011.
4 M. Kanda, "Standard probes for electromagnetic field measurement", IEEE Trans. Antennas Propagate, vol. 41, pp. 1349-1364, 1993.   DOI
5 Motohisa Kanda, "A relatively short cylindrical broadband antenna with tapered resistive loading for picosecond pulse measurements", IEEE Trans. Antennas Propagate., vol. 26, pp. 439-447, 1978.   DOI
6 IEEE Std 1309-1996, "IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz".