• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.5
• /
• pp.314-321
• /
• 2021

In the existing whole ship analysis, topside was modeled as mass element. However recently, the topside is modeled as beam element due to the owner's requirement to improve the maturity of the whole ship FE model. To follow the owner'srequirement, detailed information for topside drawing and modeling, which may delay analysis schedule, is needed. However, it is hard to respond effectively to this matter due to the lack of study on the topside from the hull perspective. Therefore in this study, the effect of the topside on the hull is investigated when the topside is modeled as a mass element or beam element respectively. In addition, the interface modeling method is analyzed to verify modeling method used in the existing whole ship analysis. The results indicate that the interface and topside modeling method used in existing whole ship analysis are appropriate. This conclusion will be the technical basis for responding to owner's requirement about the topside modeling method.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.710-718
• /
• 2008

This paper presents a simple and fast approach to plan the arrangement of supports and to do a ship docking analysis. The unpredicted structural damages often happen from a docking works as the size of ships are getting larger and larger. In docking a ship, excessive reaction forces from supports are primary causes of the structural damage. The grillage analysis method is employed to simply calculate only the reaction forces at supports. The grillage modeling strategies are proposed to improve the accuracy. In this paper, the results obtained by the proposed approach are compared with those of the current whole-ship FEA for typical types of ships. Comparison shows that the results from the present grillage approaches are reasonably in a good agreement with the 3-D full F.E one. Finally, an integrated program developed for the ship docking analysis is described.

• Structural Engineering and Mechanics
• /
• v.50 no.6
• /
• pp.835-852
• /
• 2014

Despite the availability of other transport methods such as land and air transportations, marine transportation is the most preferred and widely used transportation method in the world because of its economical advantages. In service, ships experience cyclic loading. Hence, it can be said that fatigue fracture, which occurs due to cyclic loading, is one of the most critical failure modes for vessels. Accordingly, this makes fatigue failure prevention an important design requirement in naval architecture. In general, a ship structure contains many structural components. Because of this, structural modeling typically relies on Finite Element Analysis (FEA) techniques. It is possible to increase fatigue performance of the ship structures by using FEA in computer aided engineering environment. Even if literature papers as well as rules of classification societies are available to assess effect of fatigue cracks onto the whole ship structure, analytical studies are relatively scarce because of the difficulties of modeling the whole structure and obtaining reliable fatigue life predictions. As a consequence, the objective of this study is to improve fatigue strength of a mercantile vessel against fatigue loads via analytical method. For this purpose, the fatigue life of the mercantile vessel has been investigated. Two different type of fatigue assessment models, namely Coffin-Manson and Morrow Mean stress approaches, were used and the results were compared. In order to accurately determine the fatigue life of the ship, a nonlinear finite element analysis was conducted considering plastic deformations and residual stresses. The results of this study will provide the designer with some guidelines in designing mercantile vessels.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.2 s.146
• /
• pp.171-176
• /
• 2006

To improve ship's maneuverability high lift rudders like as Schilling rudder, flap rudder etc. were used. To predict the maneuverability of a ship with flap rudder HPMM tests are carried out. To analyze the test results modular model is used. To use modular model the forces of flap rudder must be measured separately from the hull forces. The flap rudder is made as independent system from the hull. To investigate the simulation results of modular model the tests results are analyzed by whole ship model, and simulated. The compared results of simulation show a good agreement except turning test. The reason is the different analysis result of flap rudder drag forces. From the present study it is possible to analyze HPMM tests of a ship with flap rudder by modular model.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.4
• /
• pp.275-281
• /
• 2016

One of the most important things for quality to meet ship-production schedule is an accuracy control. A ship is assembled by welding through whole production process, so it is important that loss by correction will not happen as much as possible by using some engineering skills like reverse design, reverse setting and margin for thermal shrinkage. These efforts are a quite effective in fabrication stages, but not in erection stages. If a ship block which consists of common steel is exposed to directional solar radiation, its dimensional accuracy will change high as time by its thermal expansion coefficient. Therefore, the measuring work would be often done at dawn or evening even with having a very accurate device. In this study, an FE analysis method is developed to solve this problem. It can change measured data affected by solar thermal distortion to ones not, even though ship-block is measured at an arbitrary time. It will use the time when measuring, the direction of block and the weather record by satellites. It is confirmed by a comparison between measured data of a ship-block and the result by suggested analysis method. Furthermore, a pre-processing system is also developed for fast application of the suggested analysis method.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.71-76
• /
• 2009

The research to predict the resistance performance of the ship using the CFD analysis is increasing. For the CFD numerical analysis the computational mesh, which is proper to computational model, has to be made before the analysis is begun. In the parametric study, even though the deformation of each case is not very sharp, the whole computational mesh should be regenerated according to the conventional way. Hence, lots of effort is needed to repeated mesh generation work. To solve these problems, the automatic mesh generation method using the macro function of commercial CAD program and mesh generation program is introduced in this study. First, in the CAD program, by using the macro function and putting the deformation rate of bow and stern in lengthwise, the repeated modeling work is performed automatically. Next, the generated geometries are read by the mesh generation program and the proper mesh for the geometry is created automatically also using the macro function. The hybrid mesh which has unstructured grid near the bow and stern and structured grid in the remaining part of domain is used. The verification of the developed method is done by applying the method to predict the resistance performance of the podded propulsion cruise ship of the Daewoo Shipbuilding & Marine Engineering (DSME) in the cases of different length of bow and stern and pod set in different position. The author believes that the introduced method can help to make the database to optimize the resistance performance of the ship in various cases can be constructed without difficulty.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.5
• /
• pp.510-519
• /
• 2009

Ship structure is composed of the welded mixture members which are plate and stiffeners. Ship structure is also influenced by variable loadings such as wave and inertia load. There have been several fatigue damage problems on the connection between longitudinal and transverse web due to wide usage of high tensile steel and adoption of wide web space to improve shipbuilding productivity. It is impossible to estimate the fatigue lives for all connection details through refined fatigue analysis. It is necessary to use the simplified approach for the fatigue life estimation of the connection details. PLUS analysis, which is suggested by the classification society, is one of the simplified approaches and is widely adopted to get fatigue lives for the connection details along whole cargo hold area. However, ship building yards still have difficulties to get fatigue lives due to large amount of calculation and time even if this approach reduce the time and amount of calculation. This paper treats the computing system developed to reduce efforts of estimating the fatigue lives. The influence factors of mean shear stress and local dynamic pressure are easily calculated and fatigue lives for all hot spots can be estimated automatically by the developed computing system. It is possible to reduce computing time and efforts to get the fatigue lives for the connection details between longitudinals and transverse webs along the ship. This system was applied to get fatigue lives on the connection details of a VLCC and verified the availability.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.4
• /
• pp.312-326
• /
• 2012

This paper considers a fully coupled 3D BEM-FEM analysis for the ship structural hydroelasticity problem in waves. Fluid flows and structural responses are analyzed by using a 3D Rankine panel method and a 3D finite element method, respectively. The two methods are fully coupled in the time domain using a fixed-point iteration scheme, and a relaxation scheme is applied for improve convergence. In order to validate the developed method, numerical tests are carried out for a barge model. The computed natural frequency, motion responses, and time histories of stress are compared with the results of the beam-based hydroelasticity program, WISH-FLEX, which was thoroughly validated in previous studies. This study extends to a real-ship application, particularly the springing analysis for a 6500 TEU containership. Based on this study, it is found that the present method provides reliable solutions to the ship hydroelasticity problems.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.65-72
• /
• 2004

This paper deals with an experimental study on the dynamical characteristics of ship motion during trawling job on the real sea. The experiments were carried out on the small stern trawler, and roll and pitch motion of the ship according to the wave directions were simultaneously recorded by P/C in the same sea conditions. From these data, the statistical properties and power spectra were obtained, and then the analysis of ship motion in trwal job was made. As a result, it was found that the pitch motions in trwal job were displayed low amplitudes on the whole, but the rolling motions were displayed high amplitudes relatively, and very high value on the beam and quartering sea especially. Also, the trial ship has a high extinction coefficient in the roll motion, compared with the rule of stability, but when wave height takes 2.5m over, it can induce the safety of ship to scare occasionally. Therefore, a usefull countermeasure for the safety of ship has to be made adequately.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.509-513
• /
• 2005

Ship maneuverability is mainly determined according to hull-propeller-rudder system of a ship and directly related to the ship safety during the operation in the ocean. Among hull-propeller-rudder system the rudder system had direct concern with the ship maneuverability and a special rudder has been recommended to improve the ship maneuverability. In this paper the study of flapped rudder's 2-dimensional section was accomplished Model tests had been carried out with different angles of attack of a main foil and flap's deflection angles to predict the performance of the flapped rudder and the 2 frame particle tracking method had been used to obtain the velocity distribution in the flow field during model tests. $Re=1.027{\times}10^4$ had been used during the whole experiments and measured results had been compared with each other.