• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.459-465
• /
• 2012

본 연구에서 7,7'-(2,2'dimethoxy-1,1'-binaphthyl-3,3'-diyl) bis(4-(thiophen-2-yl) benzo[e] [1,2,5] thiadiazole (TBT) 라는 binaphthyl기를 기반으로 가지는 녹색 도판트 물질을 합성하였다. 추가적으로 인광 발광 물질인 iridium(III)bis[(4,6-di-fluoropheny)-pyridinato -N,C2]picolinate (FIrpic)을 홀 수송용 호스트 물질인 N,N'-dicarbazolyl-3,5-benzene (mCP)에 도핑하고, TBT와 bis(2-phenylquinolinato)-acetylacetonate iridium(III) (Ir(pq)2acac)를 전자 수송용 호스트 물질인 1,3,5-tris(N-phenylbenzimidazole-2-yl)benzene (TPBi)에 도핑하여 백색 빛을 발광하는 white organic light emitting diode (OLED)를 제작하였다. TBT를 사용하여 제작한 white OLED의 최대발광 효율과 외부 양자 효율은 각각 5.94 cd/A 과 3.23%를 나타냄을 알 수 있었다. Commission Internationale de I'Eclairage (CIE) 색 좌표의 값은 1000 nit에서 (0.34, 0.36)을 띄면서 순백색을 구현함을 확인하였다.

• 공업화학
• /
• 제27권5호
• /
• pp.455-466
• /
• 2016

유기 발광 다이오드(OLED)는 학문 및 산업분야에서 많은 관심을 받고 있다. OLED는 이미 휴대폰과 TV분야에서 상업화에 성공하고 있으며, 조명분야에서는 기존에 사용되어왔던 백열등, 형광등과는 다르게 면발광, 대면적, 초경량, 초박형, 유연성의 특징은 물론 낮은 에너지 사용 등의 차별성을 가지고 있기 때문에 최근 많은 관심을 받고 있다. 본 논문에서는 white organic light-emitting diode (WOLED)에 적용되는 대표적인 형광 및 인광 발광 재료들을 소개한다. 이렇게 선행 연구된 물질들을 이해하고 체계적으로 분류하는 것은 앞으로 새로운 발광 재료를 연구, 개발하는데 큰 도움을 줄 수 있을 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제18권7호
• /
• pp.641-646
• /
• 2005

To fabricate a single layer white organic light emitting diode (OLED), a novel non-conjugated blue emitting material PPPMA-co-DTPM copolymer was synthesized containing a perylene moiety unit with hole transporting and blue emitting ability and a triazine moiety unit with electron transporting ability. The devices were fabricated using PPPMA-co-DTPM $(PPPMA[70\;wt\%]:DTPM[30\;wt\%])$ copolymer by varying the doping concentrations of each red, green and blue fluorescent dye, by molecular-dispersing into Toluene solvent with spin coating method. In case of ITO/PPPMA-co-DTPM:TPB$(3\;mol\%):C6(0.04\;mol\%):NR(0.015\;mol\%)/Al$ structure, as they were molecular-dispersing into 30 mg/ml Toluene solvent, nearly-pure white light was obtained both (0.325, 0.339) in the CIE coordinates at 18 V and (0.335, 0.345) at 15 V. The turn-on voltage was 3 V, the light-emitting turn-on voltage was 4 V, and the maximum external quantum efficiency was $0.667\%$ at 24.5 V. Also, in case of using 40 mg/ml Toluene solvent, the CIE coordinate was (0.345, 0.342) at 20 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1587-1590
• /
• 2006

Through the engineering of recombination region and energy transfer in organic light emitting device, blue and red light emitting device with good color stability has been successfully obtained. A Color control layer (CCL), which emits green light through the energy transfer from the emission layers, has been introduced into the blue and red light emitting device for RGB white OLED. The RGB white OLED showed the current efficiency of 13 cd/A and the CIE coordinates of (0.33, 0.38) at $1000\;cd/m^2$. The device exhibited very stable spectrum with respect to operating current density and the CIE coordinates varied from (0.34, 0.38) to (0.31, 0.37) for $100-22000\;cd/m^2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.100-101
• /
• 2008

We have developed low voltage driving white organic light emitting diode with new electron transport layer. The with light emission was realized with a yellow dopant, rubrene and blue-emitting DPVBi layer. The new electron transport layer results in very high current density at low voltage, causing a reduction of driving voltage. The device with new electron transport layer shows a brightness of 1000 cd/m2 at 4.3 V.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.416-416
• /
• 2009

• ETRI Journal
• /
• 제43권6호
• /
• pp.1093-1102
• /
• 2021

Microdisplays based on organic light-emitting diodes (OLEDs) have a small form factor, and this can be a great advantage when applied to augmented reality and virtual reality devices. In addition, a high-resolution microdisplay of 3000 ppi or more can be achieved when applying a white OLED structure and a color filter. However, low luminance is the weakness of an OLED-based microdisplay as compared with other microdisplay technologies. By applying a tandem structure consisting of two separate emission layers, the efficiency of the OLED device is increased, and higher luminance can be achieved. The efficiency and white spectrum of the OLED device are affected by the position of the emitting layer in the tandem structure and calculated via optical simulation. Each white OLED device with optimized efficiency is fabricated according to the position of the emitting layer, and red, green, and blue spectrum and efficiency are confirmed after passing through color filters. The optimized white OLED device with color filters reaches 97.8% of the National Television Standards Committee standard.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.379-385
• /
• 2006

A stacked white organic light-emitting diode (OLED) having a blue/orange emitting layer was fabricated by synthesizing nitro-DPVT, a new derivative of the blue-emitting material DPVBi on the market. The white-emission of the two-wavelength type was successfully obtained by using both nitro-DPVT for blue~emitting material, orange emission as a host material and Rubrene for orange emission as a guest material. The basic structure of the fabricated white OLED is glass/ITO/NPB$(200{\AA})$/nitro-DPVT$(100{\AA})$/nitro-DPVT:$Rubrene(100{\AA})/BCP(70{\AA})/Alq_3(150{\AA})/Al(600{\AA})$. To evaluate the. characteristics of the devices, firstly, we varied the doping concentrations of fluorescent dye Rubrene from 0.5 % to 0.8 % to 1.3 % to 1.5 % to 3.0 % by weight. A nearly pure white-emission was obtained in CIE coordinates of (0.3259, 0.3395) when the doping concentration of Rubrene was 1.3 % at an applied voltage of 18 V. Secondly, we varied the thickness of the NPB layer from $150{\AA}\;to\;200{\AA}\;to\;250{\AA}\;to\;300{\AA}$ by fixing doping with of Rubrene at 1.3 %. A nearly pure white-emission was also obtained in CIE coordinates of (0.3304, 0.3473) when the NPB layer was $250-{\AA}$ thick at an applied voltage of 16 V. The two devices started to operate at 4 V and to emit light at 4.5 V. The external quantum efficiency was above 0.4 % when almost all of the current was injected.

• 공업화학
• /
• 제26권3호
• /
• pp.247-250
• /
• 2015

유기 발광 다이오드(OLED)는 학문 및 산업 분야에서 많은 관심을 받아왔다. OLED는 기존에 사용되고 있는 광원들과는 달리 면 발광, 친환경적인 에너지 사용, 대면적, 초경량, 그리고 초박형 등의 차별화된 특징을 가지고 있기 때문에 최근 조명 시장에서 많은 관심을 받고 있다. 게다가, OLED 조명은 LED 형광등을 대체할 수 있는 차세대 조명으로써 주목되고 있다. 본 논문에서는 white OLED (WOLED)에 적용되고 있는 대표적인 인광 발광 재료들을 소개하며, 특히 yellow, orange, red 인광 물질들의 화학구조와 소자효율을 정리하였다. 이러한 선행연구의 물질들을 이해하고 인광 물질들을 체계적으로 분류함으로써 새로운 발광 재료를 연구하고 개발함에 있어서 많은 도움이 되리라고 생각한다.

• 전자공학회논문지 IE
• /
• 제43권2호
• /
• pp.1-6
• /
• 2006

Two-wavelength에 의한 백색 유기발광소자를 청색계열의 발광재료 DPVBi와 오렌지계열의 발광재료 Rubrene 물질을 사용하여 제작하였다. 소자의 구조는 glass/ITO/TPD$(225{\AA})$/DPVBi/Rubrene/BCP$(210{\AA})/Alq_3(225{\AA})/Al(1000{\AA})$로 하였다. 청색 발광층인 DPVBi와 오렌지색 발광층인 Rubrene층의 두께비율를 변화시켜 가면서 백색광을 구현하였다. 청색발광재료 DPVBi층의 두께가 210${\AA}$ 이고 오렌지색 발광재료의 Rubrene 층의 두께가 180${\AA}$일 때 구동전압 15V에서 $1000cd/m^2$ 휘도와 (0.29, 0.33)의 CIE 색좌표값을 갖는 백색광을 얻었다.