• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.292-299
• /
• 1999

DC motors are widely used in many industrial fields as the actuator of the robot and the driving power motors of the electrical vehicle, Usually in the sensors of DC motors such as the encoder the tachogenerator and the potentiometer etc. are applied, But usage of these sensors results in the increased price and operating cost such that the application of the motors are limitted. To solve this problem another method to construct low cost control system is investigates. In this paper a new speed control method for DC motor is proposed. This method uses motor parameters instead of using speed or position sensors. In this way the angular velocity is estimated by the measure-ment values of the armature voltage and current instead of measuring the sensor signal. This paper presents an alorithm for estimating the angular velocity of DC motor The effectiveness of the proposed method is verified by experimental results. Also the applicability of the proposed method is presented by applying to the velocity contol of a wheeled mobile robot.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.469-475
• /
• 2010

This paper presents controller design of a two wheeled mobile inverted pendulum robot for one man transportation vehicle. Since the overall mass is varying with different drivers, suitable controller gains are obtained through experimental studies. Variation of the center of gravity due to different masses also affects stable balancing control. Thus, the desired balancing angle si required to be modified with respect to different masses. To measure masses for different drivers, a weight scale is used and those data are used for balancing control through communication. The gain scheduling method of using data obtained from experimental studies allows the robot to have stable balancing performances.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.5
• /
• pp.197-205
• /
• 2018

In this research, tricycle vehicle simulation based on multi-body environment has been introduced. Mathematical model of tricycle vehicle was developed. In this research the left and right wheel speed are calculated based on the rear steering angle and velocity. The kinematic model for the three - wheel drive system was completed and the results were analyzed using the actual vehicle drawings. Through simulink vehicle performance on linear and rotation movement were simulated. Using the mathematical model the control system can be applied directly to the tricycle vehicle. The simulation result shows that the proposed vehicle model is successfully represent the movement characteristics of the real vehicle. This model assists the vehicle developer to create the controller and understand the vehicle during the development process.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.57-66
• /
• 2009

In this paper, the steering characteristics of tracked vehicles are studied for the improvement of steering performance. The important design factor of military vehicles is high mobility. It is influenced by weight of a vehicle, engine capacity, power-train, and steering system. The military vehicle, which is equipped with caterpillar, has unique steering characteristics and is quite different from that of a wheeled vehicle. The steering of tracked vehicles is operated in the power pack due to different speeds of both sprockets. Under cornering conditions, power split and power regeneration are happened in the power pack. In case of power regeneration, power is transferred outside track after adding engine power and power inputted inside track from the ground. However, excessive power regeneration is transferred in the power pack. It damages mechanical elements. Therefore, it is necessary to analyze the steering system and check mentioned problem above. In this study, the detailed dynamic model of steering system is presented, which includes slippage between track and roadwheel, inertia force, and inertia moment. Finally, our model is compared with the Kitano model and we verified the validity of the model.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.975-979
• /
• 2008

Since tram has the advantages to reduce construction cost of infrastructure, to improve accessibility of passengers, and to offer visual pleasures, nowadays, it is one of light rails attracting public attention. Tram can be classified into two groups, one is a conventional steel-wheeled type, and the other is a rubber-tired type (bi-modal tram). The bi-modal tram propelled by the serial CNG hybrid propulsion unit has been developing since 2003 in Korea, which can realize both scheduled operation of railway and route flexibility of bus. Because the bimodal will be operated on both railway mode and bus mode, however, specific criteria and regulations for its design, certification, construction, operation and maintenance have not been determined definitely yet. In consideration of mobility enhancement for the old and the handicapped, motor vehicle safety standard and urban transit (railway vehicle) safety standard, several design specifications were proposed for car body and interiors of the bimodal tram vehicle. The design specifications proposed in this paper can be expected to promote passengers' comfort and safety, operation efficiency of the bimodal tram.

• Journal of Mechanical Science and Technology
• /
• v.19 no.9
• /
• pp.1720-1730
• /
• 2005

Automatic guided vehicle in the factory has an important role to advance the flexible manufacturing system. In this paper, we propose a novel object-transportation control algorithm of cooperative AGV systems to apply decentralized control to multiple AGV systems. Each AGV system is under nonholonomic constraints and conveys a common object-transportation in a horizontal plain. Moreover it is shown that cooperative robot systems ensure stability and the velocities of augmented systems convergence to a scaled multiple of each desired velocity field for cooperative AGV systems. Finally, the application of proposed virtual passivity-based decentralized control algorithm via system augmentation is applied to trace a circle. Finally, the simulation and experimental results for the object-transportation by two AGV systems illustrates the validity of the proposed virtual-passivity decentralized control algorithm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1447-1454
• /
• 1991

본 로봇은 wheeled type과 legged type의 장점을 함께 가지고 있으므로 주행 속도가 빠르며 환경적응력이 좋다. 기존 로봇과 비교할때 Y.Icihkawa등이 개발한 HLV와 가장 유사하지만 모터 3개로 6개의 바퀴-다리 유닛을 구동하므로 모터15개로 5개의 바퀴-다리유닛을 구동하는 Ichikawa HLV와 동력전달구조에서 많이 상이하다. 뿐만아니라 본 로봇은 3개의 모터만 사용했기 때문에 주행제어가 훨씬 간단하고 제작 비가 저렴하며 장애물 및 계단승강시 걸음새가 훨씬 간단하다.(Ichikawa HLV 경우 뒷 쪽 2개의 다리를 동시에 들 수 없기 때문에 계단 승강시 몸체 회전을 적절하게 섞어야 한다.)

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.124-131
• /
• 2011

There are many researches in unmanned vehicles such as UGV(Unmanned Ground Vehicle), AUV(Autonomous Underwater Vehicle). In these researches, differential wheeled mobile robots are mainly used to develop the experimental stage algorithm because of the simplicity of modeling and control. Usually a commercial product used in the study, but in order to operate a commercial product to the restrictions because there would need to use a fixed protocol. Using the microprocessor makes the internal sensors(encoder and INS) and external sensors(ultrasonic sensors, infrared sensors) operate and to determine commands for robot operation. This paper propose a mobile robot design for suitable purpose.

• Journal of Korea Multimedia Society
• /
• v.25 no.2
• /
• pp.325-334
• /
• 2022

Digital twin has the advantages of quality improvement and cost reduction, so it is widely applied to various industries. In this paper, a method to implement the major technologies of digital twin easily and quickly is presented. These include data management and relay servers, real-time monitoring applications including remote control interfaces, and direct connection protocols for video streaming. In addition, an algorithm for controlling a two-wheeled vehicle with a 2D interface is also proposed. The implemented system performs near real-time synchronization between the real environment and the virtual space. The delay time that occurs in remote control of the vehicle in the real environment was compared with the results of applying the proposed delay time reduction method. In addition, in the case of 2D interface-based control, an algorithm that can guarantee the user experience was implemented and applied to the actual environment and verified through experiments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.937-943
• /
• 2013

An independently driven electric corner module cannot be applied to an actual vehicle without some difficulty, because of vehicle safety problems in the case of malfunctions and degraded ride and handling performance owing to the increase in the unsprung mass. In this study, a simulator is developed to evaluate the vehicle driving performance in order to solve ride and handling problems. Component modeling of a small-sized electric vehicle with an independently driven electric corner module is performed using MATLAB/Simulink. The vehicle is modeled by using CarSim, which can be used to analyze the vehicle maneuvers with 27 DOFs. The control algorithm for the improvement of vehicle driving safety and ride and handling performance is validated by using the developed simulator.