• Korean Journal of Pharmacognosy
• /
• v.19 no.2
• /
• pp.141-151
• /
• 1988

The sedative, antipyretic, analgesic and anticonvulsive action, action on the isolated ileum in mice, retricting action on edema, action on blood pressure and respiration of Sipmidojuksan were evaluated. The results were as follows; sedative effects were recognized by the unbalanced effects of spontaneous momentum by wheel cage method, muscle relaxing action by rotor rod method and prolongation of sleeping hours. In mice, a significant antipyretic effect to endotoxin was recognized. Significant anagesic effects by acetic acid and Randall-Sellito method were recognized. Significant anticonvulsive effects to strychnine and picrotoxin were recognized. Spontaneous momentum of isolated ileum in mice was restricted, and relaxing effects on smooth muscle of digestive organ were noted by anti-acetylcholine, anti-barium chloride and anti-histamine effects. Significant antiedemic effects to carrageenin and histamine were recognized. Dilatation of blood vessels and decrease of blood pressure were noted.

• Korean Journal of Pharmacognosy
• /
• v.17 no.1
• /
• pp.12-18
• /
• 1986

In order to investigate experimentally the clinical effects of Choweesungchung-Tang that has been widely used in the cardiovascular and neuropsychogenic disease, experimental studies with experimental animals were carried out. The results of these studies were summarized as follows; Suppressive action was not shown on the convulsion induced by strychnine, but significant effect was noted on the convulsion induced by picrotoxin and caffeine. In acetic acid method, analgesic effect was noted. By the rotor rod and wheel cage method, sedative action was noted. A prolongation of hypnotic time induced by pentobarbital-Na was obtained. Relaxing action was noted remarkably on the ileum of mice, also about mice and guinea-pigs, the same effect was recognized on the smooth muscle of the ileum. The expansion of blood vessels by relaxation of smooth muscle and hypotensive action were noted.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.791-796
• /
• 2012

This paper presents the various analysis of the power system for operating the new SIHWA tidal power plant. In the analysis of the power system, summer load condition of 2011 is used. Especially, power flow, fault current, voltage and contingency of SIHWA tidal power plant area are analyzed by using PSS/E and there is no problem for the dynamic stability simulation. The new SIHWA tidal power plant is located in near metropolitan area where about 43% amount of the system load is consumed. Therefore, transmission losses are reduced. In addition, system marginal price can be lowered by generating the new SIHWA tidal power plant. The generation pattern of the SIHWA tidal plant is analyzed and the changes of generation are presented for various water levels by control of the rotor angle alpha and beta in water wheel generator.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.3
• /
• pp.334-339
• /
• 2010

The development of high-speed spindle have been studied extensively for micro machining in advanced industrial countries. The research of miniaturized high-speed air spindle is important part which needs for the micro machining process of high quality. So, This study was to carry out results about design characteristics of miniaturized high-speed air spindle. We had designed 4type turbines and shaft. They were simulated in use the computer simulation programs. We made them as products. They measured RPM (revolutions per minute). As a result of experiments, there was a contrast among 4type Turbines. it reached 384,000rpm in 4.5bar of air pressure. And, We tried to compare the results of measurement whit the results of computer simulation.

• Journal of the Korean Society of Costume
• /
• v.59 no.3
• /
• pp.109-130
• /
• 2009

This study examines the rotor characteristics of Guybang culture (women's living in Joseon) relics which the life images and mental world of women in Joseon if expressed to prepare rotor data to be utilized in modern design and information for color identity establishment of Korean women culture. The result of this study is as following: 1. From 176 pieces of relic photos, total of 1380 color chips were extracted. For color analysis, 1368 units (99.1%) of color data excluding achromatic 12 units (0.9%) among 1380 units of colors were used. With the standard of 10 color wheel of Munsell Color System, the result of studying distributions according to frequency, red was the highest by 25.9%, yellow was 21.4% in women's goods in Joseon period which the ratio of red and yellow was 473%. Other than that, GY 14.6%, YR 11.3% and RP 11.1% followed next which is studied that the warm colors that conveys enjoyable and glamorous feelings composed 84.3%; 2. As a result of tone analysis, high value low chroma ltg color showed highest distribution of 20% and d was 12.2%, b was 11.7% and sf was 8.8%. Generally, it showed high frequency in high value cocors such as ltg, sf and b of 40.5%t and in low chroma (ltg) and medium chroma (d, sf) of 41% and colors in bright and calm image was used the most. 3. As a result of analyzing relationship between hue & tone, the ltg tone of Y close to white in traditional color sensibility showed the highest frequency of 9.6% and ltg tone of GY(6.4%), b tone of RP(6.1%), and v(5.4%), b(5.4%), dp(5.3%) of R followed next. 4. As a result of analyzing the characteristics of coloring, it showed that in case of coloring contrasting hues, it is adjusted similar tones and in case of coloring less contrasting hue, the difference in tone is adjusted to be rather large to make harmonized coloring. Moreover, in case of coloring similar hues, the ratio of using same tone and similar tone was large which the coloring of calm image and dynamic image is all used.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.183-188
• /
• 2003

The present work was conducted to build a propulsion system for an airship. For this purpose, free shaft gas-turbine was modified to produce electrical power. he experiments were carried out to analyze the driving rotor condition at various power shaft loads. From this analysis, an appropriate damping device was required, and the changeable inertial moment from the fly-wheel was applied. Without the appropriate damping device, instability was found, and it was resulted as power loss. Also the amount of inertial moment was certified by the performance of dynamic transient effects from the engine test results. Knowledge gained from this research could benefit the propulsion and power conversion community by increasing the better understanding of shaft loads and inertial effects.

• Korean Journal of Pharmacognosy
• /
• v.17 no.2
• /
• pp.113-122
• /
• 1986

In order to investigate the pharmacological activities of the combined preparation of crude drugs, Chunghyulgangki-Tang was studied. Chunghyulgangki-Tang has been widely used to cerebral apoploxy, hypertension and arteriosclerosis, etc. In this study, water extract of Chunghyulgangki-Tang was conducted in attempt to investigate for analgesic, sedative, antipyretic, isolated ileum and heart, blood vessels and blood pressure action in mice, frogs, rats, guinea-pigs and rabbits. The following results were obtained; Analgesic action by the acetic acid stimulating method in mice was recognized. Sedative activities by the wheel cage method and rotor rod method in mice were shown. Prolonged action against the hypnotic duration induced by thiopental-Na was significantly noted in mice. The effect of antipyretic in endotoxin febrile rats was significantly recognized. Spontaneous motility of the isolated ilem of mice was suppressed and contractions of the isolated ileum of mice and guinea-pigs induced by acetylcholine chloride, barium chloride and histamine were remarkably inhibited. Acceleration of isolated heart motility was shown in frogs. Vaso-dilating and hypotensive actions were recognized in rabbits. According to the above results, effects based on the oriental medicinal references were approximate to the actural experimental results.

• Tribology and Lubricants
• /
• v.37 no.3
• /
• pp.91-98
• /
• 2021

This paper presents a hydrostatic bearing design and rotordynamic analysis of a turbo expander for a hydrogen liquefaction plant. Th~e turbo expander includes the turbine and compressor wheel assembled to a shaft supported by two hydrostatic radial and thrust bearings. The rated speed is 75,000 rpm and the rated power is 6 kW. For the bearing operation, we use pressurized air at 8.5 bar as the lubricant that is supplied to the bearing through the orifice restrictor. We calculate the bearing stiffness and flow rate for various gauge pressure ratios and select the orifice diameter providing the maximum bearing stiffness. Additionally, we conduct a rotordynamic analysis based on the calculated bearing stiffness and damping considering design parameters of the turbo expander. The predicted Cambell diagram indicates that there are two critical speeds under the rated speed and there exists a sufficient separation margin for the rated speed. In addition, the predicted rotor vibration is under 1 ㎛ at the rated speed. We conduct the operating test of the turbo expander in the test rig. For the operation, we supply pressurized air to the turbine and monitor the shaft vibration during the test. The test results show that there are two critical speeds under the rated speed, and the shaft vibration is controlled under 2.5 ㎛.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.463-466
• /
• 2017

The purpose of this paper is to develop a module capable of all-directional driving different from conventional wheeled robots, and to solve the problems of the conventional mobile robot with side driving performance degradation, It is possible to overcome the disadvantages such as an increase in the time required for the unnecessary driving. The all - direction spherical wheel drive module for driving a ball - balancing robot is required to develop a power transfer mechanism and a driving algorithm for driving the robot in all directions using three rotor casters. 3DoF (Axis) A driver with built-in forward motion algorithm is embedded in the module and a driving motor module with 3DoF (axis) for driving direction and speed is installed. The movement mechanism depends on the sum of the rotation vectors of the respective driving wheels. It is possible to create various movement directions depending on the rotation and the vector sum of two or three drive wheels. It is possible to move in different directions according to the rotation vector field of each driving wheel. When a more innovative all-round spherical wheel drive module for forward movement is developed, it can be used in the driving part of the mobile robot to improve the performance of the robot more technically, and through the forward-direction robot platform with the drive module Conventional wheeled robots can overcome the disadvantage that the continuous straightening performance is lowered due to resistance to various environments. Therefore, it is necessary to use a full-direction driving function as well as a cleaning robot and a mobile robot applicable in the Americas and Europe It will be an essential technology for guide robots, boarding robots, mobile means, etc., and will contribute to the expansion of the intelligent service robot market and future automobile market.