• Archives of design research
• /
• v.16 no.1
• /
• pp.281-288
• /
• 2003

Beyond the millennium industrial development affects all of our life, and the growth of the automobile among them provides us with convenience of the living. One, however, was regarded as important to recognize the safety of the parking rather today than any past, getting together with the increasing auto population into the popularization gradually. It was needed to develope an active system and safety equipment in order to protect against an accident because there were so many accidents during the parking about which one felt relief. The objectives of this study was to develop a supporting structure with high static friction, adapt to various road environments, such as an unpaved road, a wet paved road, controling an angle, considering a portable and moveable device in order to prevent an accident during parking. As it mentioned above, the novel supporting structure had four strengths rather than a previous supporting structure, a practical new design (1998 084336 B60C) The implication of the study was the inspiration from warning of the parking accident almost 10 % of the total traffic accident in Korea, tries to find a solution to a problem in order to decrease the parking accident, in addition, makes it regulation ,and it was implied to the orientation about the popularization and the practical use of the new supporting structure which was developed

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.945-953
• /
• 1997

Aromatic polyetherimide membranes were prepared by dry/wet phase inversion method and investigated regarding the pervaporation characteristic of water-alcohol mixtures by using the permselective property of imide group and the structure modification of skin layer of the membrane. The membrane selectivity increased with the reaction time of surface-modification, to some extent, and the density of top layer tends to increases with increasing the reaction time. In the case of dense membrane, the separation factor was 160 and 2000 for 90wt% ethanol mixture and 90wt% isopropanol solution, respectively, which implies that aromatic polyetherimide has a high permselectivity. The temperature dependence of permeation flux seems to follow an Arrhenius type at the temperature range of ($40^{\circ}C-70^{\circ}C$).

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.3
• /
• pp.39-45
• /
• 2010

When the ground temperature drops below $0^{\circ}C$, wet soils expand due to the ice formation in their porous space. This results in frost heave which causes structural stability problems. Frost heave is attributed by several factors such as physical soil properties and heat transfer including pore water phase change. Due to the complex physical phenomena, reliable and verified multi-dimensional numerical models for frost heave problems are still in a research stage. This study presents an efficient and simple method of overcoming numerical problems associated with sudden jump of heat capacity due to the phase change from water to ice in the pore space. This paper proposes heat transfer equation and finite element method when the saturated soils or porous rocks are subjected to freezing. Numerical analyses using the proposed method agree well with the known closed form solution and the laboratory test results.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.4
• /
• pp.251-258
• /
• 2016

PURPOSE. This study was undertaken to investigate whether use of an adhesive penetration enhancer, dimethyl sulfoxide (DMSO), improves bond stability of fiber posts to root dentin using two two-step etch-and-rinse resin cements. MATERIALS AND METHODS. Forty human maxillary central incisor roots were randomly divided into 4 groups after endodontic treatment and post space preparation, based on the fiber post/cement used with and without DMSO pretreatment. Acid-etched root dentin was treated with 5% DMSO aqueous solution for 60 seconds or with distilled water (control) prior to the application of Excite DSC/Variolink II or One-Step Plus/Duolink for post cementation. After micro-slicing the bonded root dentin, push-out bond strength (P-OBS) test was performed immediately or after 1-year of water storage in each group. Data were analyzed using three-way ANOVA and Student's t-test (${\alpha}$=.05). RESULTS. A significant effect of time, DMSO treatment, and treatment${\times}$time interaction were observed (P<.001). DMSO did not affect immediate bonding of the two cements. Aging significantly reduced P-OBS in control groups (P<.001), while in DMSO-treated groups, no difference in P-OBS was observed after aging (P>.05). CONCLUSION. DMSO-wet bonding might be a beneficial method in preserving the stability of resin-dentin bond strength over time when fiber post is cemented with the tested etch-and-rinse adhesive cements.

• ALGAE
• /
• v.23 no.4
• /
• pp.317-326
• /
• 2008

Marine algal flora and community structure were investigated seasonally at three sites in Ilkwang Bay on the southern east coast of Korea from May 2007 to February 2008. Total 103 species including 10 of green algae, 17 of brown algae, 76 of red algae were collected and identified. Among these species, 21 species were found throughout the year. Ulva pertusa, Enteromorpha linza, Grateloupia lanceolata, Chondracanthus intermedia and Caulacanthus ustulatus were distributed dominantly in upper intertidal zone. By contrast, crustose coralline algae, Grateloupia spp., Chondracanthus tenellus, Prionitis cornea and Sargassum spp. occurred predominantly in middle intertidal zone. Grateloupia spp., Sargassum spp., Ecklonia cava and Ulva pertusa were dominant in lower intertidal zone. Annual mean biomass in wet weight was 478.3 g m$^{-2}$. Maximum biomass was recorded in site 1 (731.8 g m$^{-2}$), and minimum was recorded in site 3 (78.5 g m$^{-2}$). The R/P, C/P and (R + C)/P value reflecting flora characteristics were 4.47, 0.59 and 5.06, respectively. Two groups produced by cluster analysis, one including sites 1, 2 and the other including site 3, showed meaningful difference in similarity, each other. Site 3 showed the limited species composition due to inflow of fresh water and absence of solid substratum. However, there was no significant difference between site 1 and site 2. In conclusion, the number of marine algae species and biomass in Ilkwang Bay were markedly reduced comparing with the previous studies. These suggest that a solution for reconstruction of the poor marine algal vegetation is considerably demanded.

• Korean Journal of Materials Research
• /
• v.23 no.2
• /
• pp.116-122
• /
• 2013

For fabricating silicon solar cells with high conversion efficiency, texturing is one of the most effective techniques to increase short circuit current by enhancing light trapping. In this study, four different types of textures, large V-groove, large U-groove, small V-groove, and small U-groove, were prepared by a wet etching process. Silicon substrates with V-grooves were fabricated by an anisotropic etching process using a KOH solution mixed with isopropyl alcohol (IPA), and the size of the V-grooves was controlled by varying the concentration of IPA. The isotropic etching process following anisotropic etching resulted in U-grooves and the isotropic etching time was determined to obtain U-grooves with an opening angle of approximately $60^{\circ}$. The results indicated that U-grooves had a larger diffuse reflectance than V-grooves and the reflectances of small grooves was slightly higher than those of large grooves depending on the size of the grooves. Then amorphous Si:H thin film solar cells were fabricated on textured substrates to investigate the light trapping effect of textures with different shapes and sizes. Among the textures fabricated in this work, the solar cells on the substrate with small U-grooves had the largest short circuit current, 19.20 mA/$cm^2$. External quantum efficiency data also demonstrated that the small, U-shape textures are more effective for light trapping than large, V-shape textures.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.5
• /
• pp.339-342
• /
• 2006

This study was designed to prepare an animal model for partial thickness bum wound which can be employed for testing topical therapy. We first evaluated whether rabbit ear and mouse back skin wound model could differentiate the wound healing process in terms of degree of re epithelialization, required days for complete wound closure, presence of scarring. $2^{nd}$ degree wet bum were prepared on mouse back skin and rabbit ear by applying 5 mL hot water($85{\pm}0.1^{\circ}C$) for 7 see followed by 5 mL ice-cold 0.5% acrynol solution for cooling and disinfecting the inflicted area. After removing the dead epidermis layer at 24 hr, tested dressings were applied for specified time and wound progression was investigated. In mouse model, wound contraction was the primary wound closing mechanism, which is quite different from human wound healing process. In rabbit ear model, epidermal regeneration was the major wound healing process rather than wound contraction and the difference in wound healing property among tested dressings could be clearly demonstrated. A rabbit ear model could differentiate the wound progression among open, occluded and epidermal growth factor(EGF) treated wound. Four sites of circular wound(diameter: 1 cm) on the anterior part of rabbit ear could be employed for the comparative wound healing study. For obtaining reproducible bum wound, degree of bum depth and bum sites should be carefully controlled in addition, employing rabbits of same strain and weight. The result suggests that rabbit ear could be employed as a reliable and human-resembled wound model.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.110-117
• /
• 2016

In the existing research, the ammonia aqueous solution was used in order to remove the Nitrogen dioxide using the scrubber. However, ammonia is poisonous and stench is extreme. So, the system application follows the difficulty. Experiments were conducted to find a substitute material ammonia. The sodium hydroxide(NaOH), sodium thiosulfate ($Na_2S_2O_3$), and urea were used with the substitute substance. The experimental condition proceeded as the optimum conditions in the existing ammonia use. The experimental result NaOH and $Na_2S_2O_3$ was available. NaOH showed the efficiency which is the highest in 2.5%. And $Na_2S_2O_3$ showed the efficiency which is the highest in 5.0%. The efficiency was not fixed and the urea was inappropriate with the substitute substance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.11
• /
• pp.841-845
• /
• 2013

We give a textured front on silicon wafer for high-efficiency solar cells by using micro contact printing method which uses PDMS (polydimethylsiloxane) silicon rubber as a stamp and SAM (self assembled monolayer)s as an ink. A random pyramidal texturing have been widely used for a front-surface texturing in low cost manufacturing line although the cell with random pyramids on front surface shows relatively low efficiency than the cell with inverted pyramids patterned by normal optical lithography. In the past two decades, the micro contact printing has been intensively studied in nano technology field for high resolution patterns on silicon wafer. However, this promising printing technique has surprisingly never applied so far to silicon based solar cell industry despite their simplicity of process and attractive aspects in terms of cost competitiveness. We employ a MHA (16-mercaptohexadecanoic acid) as an ink for Au deposited $SiO_2/Si$ substrate. The $SiO_2$ pattern which is same as the pattern printed by SAM ink on Au surface and later acts as a hard resist for anisotropic silicon etching was made by HF solution, and then inverted pyramidal pattern is formed after anisotropic wet etching. We compare three textured surface with different morphology (random texture, random pyramids and inverted pyramids) and then different geometry of inverted pyramid arrays in terms of reflectivity.

• Membrane and Water Treatment
• /
• v.7 no.1
• /
• pp.55-70
• /
• 2016

Microfiltration/ultrafiltration (MF/UF) Adsorptive polyamide-6 (PA-6) membranes were prepared using wet phase inversion process. The prepared PA-6 membranes are characterized by scanning electron microscopy (SEM), porosity and swelling degree. In this study, the membranes performance has examined by adsorptive removal of copper ions from aqueous solutions in a batch adsorption mode. The $PA-6/H_2O$ membranes display sponge like and highly porous structures, with porosities of 41-73%. Under the conditions examined, the adsorption experiments have showed that the $PA-6/H_2O$ membranes had a good adsorption capacity (up to 120-280 mg/g at the initial copper ion concentration ($C_0$) = 680 mg/L, pH7), fast adsorption rates and short adsorption equilibrium times (less than 1.5-2 hrs) for copper ions. The fast adsorption in this study may be attributed to the high porosities and large pore sizes of the $PA-6/H_2O$ membranes, which have facilitated the transport of copper ions to the adsorption. The results obtained from the study illustrated that the copper ions which have adsorbed on the polyamide membranes can be effectively desorbed in an Ethylene dinitrilotetra acetic acid Di sodium salt ($Na_2$ EDTA) solution from initial concentration (up to 92% desorption efficiency) and the PA-6 membranes can be reused almost without loss of the adsorption capacity for copper ions. The results obtained from the study suggested that the $PA-6/H_2O$ membranes can be effectively applied for the adsorptive removal of copper ions from aqueous solutions.