• Journal of Forest and Environmental Science
• /
• v.27 no.3
• /
• pp.151-156
• /
• 2011

Seeds of Xanthoceras sorbifolia Bunge were collected from two plantations and two superior trees in Inner Mongolia: and one plantation and one superior tree in Liaoning, China in late August, 2011. Yellowhorn or goldenhorn is an important tree species, from the aspects of source of edible oil and biodiesel and pioneering capacity of degraded and desert land. Characteristics investigated were seed length, width, and weight: weight and volume of 1,000 seeds: and weight and volume of one-liter seeds. The seeds of Qingsonglingxiang No. 1, growing alone in an open space, showed the highest values in seed length (16.08 mm), width (14.48 mm) and weight (1.40 g), while those of Tree No. 160 in Ar Khorqin Banner were the lowest ones: that is, 11.48mm for length, 11.81 mm for width, and 0.73 g for weight, respectively. Traits of seeds varied quite much between trees and among areas; for example, Tree No. 38 and No. 160 produced quite different seeds in several traits, although they are adjacent to each other in the same farm. Weight of 1,000 seeds varied from 718.0 g to 1,010.1 g and volume from 0.76 L to 1.52 L. Weight of one-liter seeds were 522.3 g to 688.2 g, while the number of seeds were 603 to 935. Seeds which were soaked in the water at $4^{\circ}C$ for 2 days showed the highest germination rate (89%) in a 30-day test, which was about 10% to 40% higher than those of non-treatment and dipping treatment at $36^{\circ}C$ followed by keeping under room temperature for 2 days. 81% of seeds in the wet sand at room temperature germinated, while 23% of seeds deprived of seed coat germinated. It is necessary to understand seed traits to select superior clones or provenances for the increased, unfluctuating production of seed.

• Composites Research
• /
• v.31 no.6
• /
• pp.317-322
• /
• 2018

In various industry, the composite is tried to be applied to products and thermoplastic based composite is in the spotlight because this composite can be recycled. The use of continuous fiber thermoplastic (CFT) method increased gradually than long fiber thermoplastic (LFT). In this study, tensile, flexural, and impact test of different array types of glass fiber (GF)/thermoplastic composites were performed to compare with GF array. Impregnation property between GF mat and thermoplastic was determined using computed tomography (CT). At CFT method, thermoplastic film is not wet into GF roving and many voids are appeared into composite. This phenomenon affects to decrease mechanical properties. Plain pattern GF mat was the best mechanical and impregnation properties that distance between two roving was set closely to $100{\mu}m$.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.12
• /
• pp.49-55
• /
• 2019

Slope failure analysis entails proper understanding of various factors as well as the characteristics of ground conditions, which are difficult to achieve due to technological limits. Despite a number of past studies to clarify possible factors triggering slope failures, the impact of rainfall characteristics and infiltration rate, which are the key to estimation of slope stability in wet condition, on slope failures still remains unclear. This study has estimated permeability against various unit weights of soil based on constant head permeability tests using Jumunjin standard silica sand. One dimensional infiltration tests were conducted to estimate the infiltration capacity and the amount of infiltration taking into account the permeability and rainfall intensity. The applicability of existing empirical equations for the estimation of infiltration to granular soils was verified on the basis of the test results.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.963-978
• /
• 2020

Earthquakes can induce a large number of landslides and cause very serious property damage and human casualties. There are two issues in study on earthquake-induced landslides: (1) slope stability analysis under seismic loading and (2) debris flow run-out analysis. This study aims to review technical studies related to the development and application of earthquake-induced landslide models (seismic slope stability analysis). Moreover, a pilot application of a physics-based slope stability model to Mt. Umyeon, in Seoul, with several earthquake scenarios was conducted to test regional scale seismic landslide mapping. The earthquake-induced landslide simulation model can be categorized into 1) Pseudo-static model, 2) Newmark's dynamic displacement model and 3) stress-strain model. The Pseudo-static model is preferred for producing seismic landslide hazard maps because it is impossible to verify the dynamic model-based simulation results due to lack of earthquake-induced landslide inventory in Korea. Earthquake scenario-based simulation results show that given dry conditions, unstable slopes begin to occur in parts of upper areas due to the 50-year earthquake magnitude; most of the study area becomes unstable when the earthquake frequency is 200 years. On the other hand, when the soil is in a wet state due to heavy rainfall, many areas are unstable even if no earthquake occurs, and when rainfall and 50-year earthquakes occur simultaneously, most areas appear unstable, as in simulation results based on 100-year earthquakes in dry condition.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.893-899
• /
• 2018

In the present study, we investigated the sulfur poisoning of the Ni anode in solid oxide fuel cells (SOFCs) as a function of operating conditions. Anode supported cells were fabricated, and sulfur poising tests were conducted as a function of current density, $H_2S$ concentration and humidity in the anode gas. The voltage drop was significant under the higher current density (${\sim}714mA/cm^2$) condition, while it was much reduced under the lower current density (${\sim}389mA/cm^2$) condition, at 100 ppm of $H_2S$. A secondary voltage drop, which occurred only at the high current density, was attributed to Ni oxidation in the anode. Thus, operation at high current density with high $H_2S$ concentration may lead to permanent deterioration in the anode. The effect of water content (10%) on the sulfur poisoning was also investigated through a constant current test (${\sim}500mA/cm^2$) at 10 ppm of $H_2S$. The cell operating with 10% wet anode gas showed a much smaller initial voltage drop, in comparison with a dry anode gas. The present study indicates that operating conditions, such as gas humidity and current density, should be carefully taken into account, especially when fuel cells are operated with $H_2S$ containing fuel.

• Korean Journal of Metals and Materials
• /
• v.49 no.8
• /
• pp.596-600
• /
• 2011

Thermal degradation behavior of a $WO_3-TiO_2$ monolithic catalyst was investigated in terms of structural, morphological, and physico-chemical analyses. The catalyst with 4 wt.% $WO_3$ contents were prepared by a wet-impregnation method, and a durability test of the catalysts were performed in a temperature range between $400^{\circ}C$ and $800^{\circ}C$ for 3 h. An increase of thermal stress decreased the specific surface area, which was caused by grain growth and agglomeration of the catalyst particles. The phase transition from anatase to rutile occurred at around $800^{\circ}C$ and a decrease in the Brønsted acid sites was confirmed by structural analysis and physico-chemical analysis. A change in Brønsted acidity can affect to the catalytic efficiency; therefore, the thermal degradation behavior of the $WO_3-TiO_2$ catalyst could be explained by the transition to a stable rutile phase of $TiO_2$ and the decrease of specific surface area in the SCR catalyst.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.237-246
• /
• 2021

With climate change, debris flow has been increasing due to the collapse and erosion of shallow slopes caused by extreme rainfall. It is preferred to an economical and eco-friendly method rather than reinforcement of soil slopes with the earth anchor or nailing method. In this study, a soil improvement agent was developed by utilizing insitu soil, leaf mold, and used harbal medicine to help sufficient vegetation. In addition, to prevent surface erosion, shear strength of the soil was increased by using micro cement and hemihydrate gypsum as additives. The optimum mix ratio of the mixture is determined by increasing the shear strength by checking the erosion progress of the ground surface layer due to rainfall through an laboratory test. The safety factor of soil slope has been improved on the slope surface reinforced by the improvement agent, and the strength of erosion has been increased, making it efficient to cope with heavy rain during wet season.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.109-114
• /
• 2021

We investigated the effects of atmospheric hydrogen plasma treatment on Cu-Cu direct bonding. Hydrogen plasma was effective in reducing the surface oxide layer of Cu thin film, which was confirmed by GIXRD analysis. It was observed that larger plasma input power and longer treatment time were effective in terms of reduction and surface roughness. The interfacial adhesion energy was measured by DCB test and it was observed to decrease as the bonding temperature decreased, resulting in bonding failure at bonding temperature of 200℃. In case of wet treatment, strong Cu-Cu bonding was observed above bonding temperature of 250℃.

• Development and Reproduction
• /
• v.25 no.4
• /
• pp.257-268
• /
• 2021

Phthalates and their metabolites are well-known endocrine disrupting chemicals. Di-(2-ethylhexyl) phthalate (DEHP) has been widely used in industry and the exposing possibility to adult is high. In this study, DEHP was treated (133 ㎍/L and 1,330 ㎍/L in drinking water) according to the OECD test guideline 443 to mature female mice and their adrenal gland were examined for histological characteristics and steroidogenic gene expression. The wet weight of the adrenal gland was increased in all administrated groups compared to control. The diameter of zona fasciculata (ZF) was increased by DEHP in both outer ZF and inner ZF but there was no difference in morphology of the cells and arrangements into zona between groups. In addition, the arrangement of extracellular matrix was not different between control and DEHP groups. CYP11B1 was mainly localized at ZF and the intensity was not different between groups. DAX1 was localized in zona glomerulosa (ZG) and ZF, and its expression levels were decreased by DEHP administration. Its level was lower in DEHP133 group than DEHP1330 group. On the other hand, CYP17A1 was localized in ZG of DEHP1330 group. These results suggest that chronic low-dose DEHP exposing may modify the microstructure and function of the adrenal cortical cortex.

• Fisheries and Aquatic Sciences
• /
• v.26 no.8
• /
• pp.491-499
• /
• 2023

Lake Tinisu Abaya is home to some fish species. The lake's native fish species include Barbus and Tilapia zilli. Tilapia fish (Oreochromis niloticus L.) were stocked in Lake Tinishu Aabaya in 1997. This study aimed to investigate the feeding behaviors of O. niloticus in Lake Tinishu Abaya to develop an appropriate fisheries management approach in the lake. 428 O. niloticus fish samples (2.5 to 30.9 cm and 1.1 to 475 g) were collected to calculate the diet composition. Out of the total of 428 gut contents examined, 55 (12.85%) were found to be empty and 373 (87.15%) to be containing one or more food items. The diet behavior of the stocked fish in the study lake revealed that phytoplankton (39.5% by volume) and macrophytes (25.81% by volume) were the most noteworthy food items followed by detritus (14.39%) and zooplankton (12.95%). With increasing fish size, the importance of phytoplankton, macrophytes, and detritus increased while the contribution of zooplankton, insects, and other foods with an animal origin decreased. Seasonal variation in the diet composition of fish was evident (t-test; p < 0.05). Macrophytes, zooplankton, and detritus were the dominating food items during the wet season, while phytoplankton predominated during the dry season. This study demonstrated that O. niloticus had phytoplanktivores that primarily consumed phytoplankton and that the seasons and fish size had a significant impact on their feeding preferences. The diet of O. niloticus in Lake Tinishu Abaya comprised foods with both plant and animal origins. It concludes that the dietary habit of O. niloticus in the lake is, generally, the omnivorous type.