• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1106-1110
• /
• 2005

We fabricated (110) silicon hard master by using anisotropic wet etching for embossing. The etching chemical for the silicon wafer was a TMAH $25\%$ solution. The anisotropic wet etching produces a smooth sidewall surface and the surface roughness of the fabricated master is about 3 nm. After spin coating an organic-inorganic sol-gel hybrid material on a silicon substrate, we employed hot embossing technique operated at a low pressure and temperature to form patterns on the silicon substrate by using the fabricated master. We successfully fabricated the multi-mode planar optical waveguides showing low propagation loss of 0.4 dB/cm. The surface roughness of embossed patterns was uniform for more than 10 times of the embossing processes with a single hydrophobic surface treatment of the silicon hard master.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권6호
• /
• pp.845-854
• /
• 2016

Characteristics and properties of gelatin from goat skin pretreated with NaOH solutions (0.50 and 0.75 M) for various times (1 to 4 days) were investigated. All gelatins contained ${\alpha}$-chains as the predominant component, followed by ${\beta}$-chain. Gelling and melting temperatures of those gelatins were $23.02^{\circ}C$ to $24.16^{\circ}C$ and $33.07^{\circ}C$ to $34.51^{\circ}C$, respectively. Gel strength of gelatins increased as NaOH concentration and pretreatment time increased (p<0.05). Pretreatment for a longer time yielded gelatin with a decrease in $L^*$-value but an increase in $b^*$-value. Pretreatment of goat skin using 0.75 M NaOH for 2 days rendered the highest yield (15.95%, wet weight basis) as well as high gel strength (222.42 g), which was higher than bovine gelatin (199.15 g). Gelatin obtained had the imino acid content of 226 residues/1,000 residues and the gelatin gel had a fine and ordered structure. Therefore, goat skin gelatin could be used as a potential replacer of commercial gelatin.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.740-744
• /
• 2001

The $Y_2SiO_5:Ce$ phosphors were synthesized by sol-gel technique in order to improve the performance of blue emitting phosphors for field emission display(FED). The resulted$Y_2SiO_5:Ce$ phosphors enhanced the emission intensity. In addition, calcination temperature of sol-gel technique(1300~140$0^{\circ}C$) was lower than that of the solid state reaction(>1$600^{\circ}C$). Under 365 nm and low voltage electron excitations. $Ce^{3+}$ -activated $Y_2SiO_5$phosphors showed blue emission band with a range of 400~ 430nm. Especially, 2mol% $Ce^{3+}$ doped $Y_2SiO_5:Ce$phosphors showed the maximum emission intensity. We have also controlled drying temperature of wet gel, pH, and $H_2O$/TEOS molar ratio for the optimum condition of TEOS hydrolysis.

• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.800-805
• /
• 2017

Randomly patterned and wet chemical etching processes were used to treat anti-glare of display cover glasses. The surface and optical properties of grain size and surface morphology controlled by randomly patterned etching and wet chemical solution etching were investigated. The surface morphology and roughness of the etched samples were examined using a spectrophotometer and a portable surface roughness (Ra) measuring instrument, respectively. The gloss caused by reflection from the glass surface was measured at $60^{\circ}$ using a gloss meter. The surface of the sample etched by the doctor-blade process was more uniform than that obtained from a screen pattern etching process at gel state etching process of the first step. The surface roughness obtained from the randomly patterned etching process depended greatly on the mesh size, which in turn affected the grain size and pattern formation. The surface morphology and gloss obtained by the etching process in the second step depended primarily on the mesh size of the gel state etching process of the first step. In our experimental range, the gloss increased on decreasing the grain size at a lower mesh size for the first step process and for longer reaction times for the second step process.

• 대한금속재료학회지
• /
• 제47권8호
• /
• pp.516-521
• /
• 2009

In this study we report a rapid synthesis of nanoporous organo-functional silica (OFS) with unimodal and bimodal pore structures encompassing pores ranging from meso-to macroscale. The problems of tediousness and high production cost in the conventional syntheses are overcome by co-condensation of an inexpensive inorganic precursor, sodium silicate with an organosilane containing trimethyl groups. The insitu covalent anchoring of the non-polar trimethyl groups to the inner pore walls prohibits irreversible shrinkage of the wet-gel during microwave drying at ambient pressure and thus larger size pores (from ca. 20 to ca. 100 nm) can be retained in the dried silica. The drying process of the silylated wet-gels at an ambient pressure can be greatly accelerated upon microwave exposure instead of drying in an oven or furnace. Using this approach, anoporous and superhydrophobic silicas showing a wide variation in texture and morphology can be readily synthesized in roughly two hours. The effects of various sol-gel parameters solely on the textural properties of the organo-functional silica (OFS) have been investigated and discussed.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.892-896
• /
• 1991

The cyrstallization behavior of lead titanate powders prepared by sol-gel and coprecipitation techniques was investigated. The lead titanate precursors were derived from a mixed solution of lead nitrate and titanium tetrachloride at 4$0^{\circ}C$ to 43$^{\circ}C$ and pH of 9.00 to 9.75. The X-ray diffraction patterns of the dried gel and coprecipitated powders showed it to be amorphous. DTA runs of the powders indicated crystallization to occur at 475~48$0^{\circ}C$. However, the amorphous powders were partially crystallized at 400~45$0^{\circ}C$ with sufficient annealing time. The room temperature Raman spectra from heat-treated powders changed continuously from amorphous to crystalline state with increasing heat-treating temperature. By annealing coprecipitated powders, a dramatic change in the Raman spectra due to the structural relaxation as the annealing temperatures increased, was clearly visible. i.e., coprecipitated, gel, and crystalline structure, in turn.

• 공업화학
• /
• 제7권5호
• /
• pp.832-842
• /
• 1996

성질이 서로 다른 그물 구조형 이온교환수지인 Amberlyst-15, Amberlyst-15(wet)와 Amberlyst XN-1010을 가지고 고정층 상압 유통식 반응장치에서 옥탄가 향상제인 TAME 합성반응을 행하였다. Amberlyst-15가 Amberlyst-15(wet)와 Amberlyst XN-1010에 비해 활성이 좋았는데 그 이유는 겔형 미세입자 내부 활성점의 반응참여 정도가 크기 때문으로 생각되며, TAME 합성반응의 최적 조건들은, 반응온도=$135^{\circ}C$, 반응물 몰비(MeOH/I.A.A.)=1.0~4.0, W/F=2.0~4.0 gr.-cat. hr/gr.-mole일 때이었다. X-ray 회절 분석결과 $2{\theta}=20$에서 styrene divinyl benzene이 가교결합을 나타냈으며, DSC 분석결과 열적 안정성의 순서로는 Amberlyst-15, Amberlyst-15(wet) 및 Amberlyst XN-1010이였다. 본 실험에서 구한 TAME 합성의 겉보기 활성화 에너지 값은 Amberlyst-15:Ea=12.36 kcal/mole, Amberlyst-15(wet):Ea=12.46 kcal/mole 및 Amberlyst XN-1010:Ea=14.72 kcal/mole이였다.

• 한국식품영양과학회지
• /
• 제34권3호
• /
• pp.414-419
• /
• 2005

실온 이상의 온도(40, 50, 50℃)에서 햅쌀과 저장 쌀을 가온 수침하여 습식제분한 쌀가루의 특성을 조사하였다. 습식처리한 쌀가루는 모두 30% 이상의 수분을 지니고 있었으며, 60℃에서 수침을 한 쌀가루가 40℃, 50℃수침에 비해 수분 함량이 높게 나타났다 쌀가루의 L값은 햅쌀로 제조한 쌀가루에서 약간 높았으며 황색도를 나타내는 b값은 저장 쌀이 햅쌀 백미로 만든 쌀가루보다 높게 나타났다. 햅쌀과 저장 쌀 모두에서 쌀가루의 WAI, WSI 및 gel consistency는 수침 온도가 증가함에 따라 증가하였다 Amylograph peak viscosity, hot paste viscosity, 그리고 cold paste viscosity 모두 수침온도가 증가함에 따라 증가하였으며 특히 저장 쌀 시료에서 보다 큰 폭으로 증가하였다. DSC호화개시온도 및 호화정점온도는 수침온도가 높아짐에 따라 증가하였고, 호화엔탈피는 감소하는 경 향을 보였다. 쌀가루의 입도 분석 결과 저장 쌀이 햅쌀로 제조한 쌀가루에 비해 작은 경향을 보여주었으며 햅쌀의 경우 수침온도가 60℃, 50℃, 40℃순으로 입도분포가 큰 경향을 보여주었다. SEM에 의한 쌀가루의 미세구조 관찰 결과 수침 온도의 증가에 따라 입자 크기의 증가와 손상된 쌀가루 표면이 관찰되었다.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.574-582
• /
• 2009

$UO_2$ microsphere particles, core material of HTGR(High Temperature Gas Reactor) nuclear fuel, were prepared using by the GSP(Gel Supported Precipitation) method which is a modified-method of the wet sol-gel process. The spherical shape of initial liquid ADU droplets from the vibration nozzle system was continuously kept till the conversion to the final $UO_2$ microsphere. But the size of a final $UO_2$ microsphere was shrunken to about 25% of an initial ADU droplet size. Also, we found that the composition of dried-ADU gel particles was constituted of the very complicated phases, coexisted the U=O, C-H, N-H, N-O, and O-H functional groups by FT-IR. The important factors for obtain the no-crack $UO_2$ microsphere during the thermal treatment processes must perfectly wash out the remained-$NH_4NO_3$ within the ADU gel particle in washing process and the selections of an appropriate heating rate at a suitable gas atmosphere, during the calcining of ADU gel particles, the reducing of $UO_3$ particles, and the sintering of $UO_2$ particles, respectively.

• 한국전기전자재료학회논문지
• /
• 제29권1호
• /
• pp.40-43
• /
• 2016

Transparent color coating films were fabricated on a glass substrate by using sol-gel hybrid binder and organic dye. Sol-gel hybrid binder coating film fabricated with PTMS of 0.03 mole showed a very high pencil hardness of 9 H. As the withdrawal speed increased from 1.0 mm/s to 5.0 mm/sec, The yellowness ($b^*$) of coating glass also gradually increased. The transmittance of yellow color coating glass was 82.6% and the haze of coating glass was 0.35%. Red and blue color coating glasses also showed the high transmittance of 62.4% and 80.6% respectively. The surface hardness of color coating films was 6 H.