• Nuclear Engineering and Technology
• /
• v.44 no.6
• /
• pp.623-638
• /
• 2012

The volume of fluid (VOF) model of FLUENT and the lattice Boltzmann method (LBM) are used to simulate two-phase flows. Both methods are validated for static and dynamic bubble test cases and then compared to experimental results. The VOF method does not reduce the spurious currents of the static droplet test and does not satisfy the Laplace law for small droplets at the acceptable level, as compared with the LBM. For single bubble flows, simulations are executed for various Eotvos numbers, Morton numbers and Reynolds numbers, and the results of both methods agree well with the experiments in the case of low Eotvos numbers. For high Eotvos numbers, the VOF results deviated from the experiments. For multiple bubbles, the bubble flow characteristics are related by the wake of the leading bubble. The coaxial and oblique coalescence of the bubbles are simulated successfully and the subsequent results are presented. In conclusion, the LBM performs better than the VOF method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.685-693
• /
• 1990

The heat transfer coefficients were calculated numerically to see the effects of radiation around the porous medium put on the flat plate at a distance from the leading edge of flat plate for the two-dimensional laminar flows. To verify the analytical model developed and invoke the heat/mass transfer analogy, an experiment was carried out using naphthalene sublimation technique. From the effects of the wake, Sherwood number is maximum around the region where the porous medium is attached. The theoretical results correspond well with the experimental results at small Darcy number. Permeability of ceramic blocks used for experiment was also measured and the Forchheimer equation is applicable in our measurement range.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.2
• /
• pp.116-123
• /
• 1994

The E- $\varepsilon$ turbulence numerical model was applied to a flow around triangular ridge in neutral boundary layer. Scale of cavity region, mean velocity, Reynolds stress and eddy diffusivity were investigated. The height of cavity region was in satifactory agreement with the wind tunnel data while the length of cavity region was underestimated. The man wind velocities outside the cavity region were well Predicted by the model, however in cavity region the mean wind velocities of wind tunnel data were larger than the model results Reynolds stress of cavity region was overestimated by the model. The eddy diffusivity of wake region was strongly modified under the influence of triangular ridge. The local minimum of the eddy diffusivity was occured in the lee of the ridge top.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.3
• /
• pp.1-7
• /
• 2004

Using WAsP, which is PC-program for the vertical and horizontal extrapolation of wind data, annual energy production as well as wind energy density has been predicted for Haengwon wind farm in Jeju island. The predicted results were compared with real data derived from wind turbines in Haengwon wind farm. As the results, in order to produce more electric power, new wind turbines should be located along coastal line, which has comparatively high wind energy density. Also, the roughness length should be inputted to the Map Editor program for better agreement with real annual energy production.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.1 no.1
• /
• pp.29-38
• /
• 2009

A ship's screw-propeller produces thrust by rotation and, at the same time, generates rotational flow behind the propeller. This rotational flow has no contribution to the generation of thrust, but instead produces energy loss. By recovering part of the lost energy in the rotational flow, therefore, it is possible to improve the propulsion efficiency. The contra-rotating propeller (CRP) system is the representing example of such devices. Unfortunately, however, neither a design method nor a full-scale performance prediction procedure for the CRP system has been well established yet. The authors have long performed studies on the CRP system, and some of the results from the authors' studies shall be presented and discussed.

• Biomolecules & Therapeutics
• /
• v.26 no.3
• /
• pp.268-273
• /
• 2018

Sleep is the most basic and essential physiological requirement for mental health, and sleep disorders pose potential risks of metabolic and neurodegenerative diseases. Tryptic hydrolysate of ${\alpha}_{S1}$-casein (${\alpha}_{S1}-CH$) has been shown to possess stress relieving and sleep promoting effects. However, the differential effects of ${\alpha}_{S1}-CH$ on electroencephalographic wave patterns and its effects on the protein levels of ${\gamma}$-aminobutyric acid A ($GABA_A$) receptor subtypes in hypothalamic neurons are not well understood. We found ${\alpha}_{S1}-CH$ (120, 240 mg/kg) increased sleep duration in mice and reduced sleep-wake cycle numbers in rats. While ${\alpha}_{S1}-CH$ (300 mg/kg) increased total sleeping time in rats, it significantly decreased wakefulness. In addition, electroencephalographic theta (${\theta}$) power densities were increased whereas alpha (${\alpha}$) power densities were decreased by ${\alpha}_{S1}-CH$ (300 mg/kg) during sleep-wake cycles. Furthermore, protein expressions of $GABA_A$ receptor ${\beta}_1$ subtypes were elevated in rat hypothalamus by ${\alpha}_{S1}-CH$. These results suggest ${\alpha}_{S1}-CH$, through $GABA_A$ receptor modulation, might be useful for treating sleep disorders.

• New & Renewable Energy
• /
• v.7 no.4
• /
• pp.50-57
• /
• 2011

A wind turbine simulation program for the coupled dynamics of aerodynamics, elasticity, multi-body dynamics and controls of turbine is newly developed by combining an aero-elastic code and a multi-body dynamics code. The aero-elastic code, based on the blade momentum theory and generalized dynamic wake theory, is developed by NREL(National Renewable Energy Laboratory, USA). The multi-body dynamics code is commercial one which is capable of accounting for geometric nonlinearity and twist deflection. A turbulent wind load case is simulated for the NREL 5-MW baseline wind turbine model by the developed program and FAST. As a result, the two results agree well enough to verify the reliability of the developed program.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.9
• /
• pp.1129-1138
• /
• 1999

This paper presents a systematic two-zone modeling for reliable performance prediction of centrifugal compressors. In order to improve the predictive capability, a modified jet slip factor is developed and new corrections for the wake flow deviation and mass fraction are suggested based on the comprehensive experimental data of the three Eckardt impellers. The proposed two-zone modeling is tested against nine sets of measured data of centrifugal compressors. The results are also compared with those obtained by the mean streamline analysis. It was found that the predictions by the present two-zone modeling agree fairly well with experimental data for a variety of centrifugal compressors over the wide operating conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.1
• /
• pp.30-38
• /
• 2008

As a follow-up of our previous studies on flow-induced forces on two identical nearby circular cylinders immersed in the cross flow at Re=100 and flow patterns past them,$^{(1,2)}$ we present Reynolds-number effects on the forces and patterns by further computing flows with Re=40, 50, 160. We consider all possible arrangements of the two circular cylinders in terms of the distance between the two cylinders and the angle inclined with respect to the main flow direction. Collecting all the numerical results obtained, we propose contour diagrams for mean force coefficients and their rms of fluctuation as well as for flow patterns and Strouhal number for each Re. These diagrams shed light on a comprehensive picture on how the wake interaction between the two cylinders alters depending on Re.

• Sleep Medicine and Psychophysiology
• /
• v.19 no.2
• /
• pp.59-62
• /
• 2012

Borderline personality disorder (BPD) is characterized by identity and interpersonal problem, affective dysregulation and pervasive severe impulsivity. Although sleep disturbances are not primary symptoms of BPD, they are important aspects of this disorder. However, clinicians and researchers did not give much attention to the sleep symptoms of BPD yet. Measured by nocturnal polysomnography, increased sleep latency as well as reduced total sleep time and sleep efficiency, and 'depression-like' REM abnormalities (i.e., reduced REM latency and increased REM density) are found in BPD patients. Co-morbid sleep disorders such as chronic insomnia, nightmare disorder or circadian rhythm sleep disorder associated with BPD have been reported. Clinicians should focus on the sleep complaints of BPD patients, and carefully manage such symptoms with sleep hygiene education, cognitive psychotherapy or light therapy.