• 한국해양환경ㆍ에너지학회지
• /
• 제9권2호
• /
• pp.92-97
• /
• 2006

수치계산을 통해 소형 고속선의 선형설계를 수행하였다. 선형변환 프로그램인 HCAD를 사용하고 차인형 선형을 기준선으로 하여 둥근바닥 선형을 설계하였다. WAVIS를 시용하여 두 가지 선형에 대한 선체주위의 유동장과 조파저항 계산 결과를 보였다. 차인형 선형의 저항특성이 둥근 바닥선형에 비해 다소 크게 나타났으나 소형 조선소의 건조비를 감안하여 차인형 선형의 선수부 개량과 선미 웨지의 설계를 통해 조파저항의 감소를 시도하였다. 수치계산 결과 선미 웨지의 적용에 의해 차인형 선형의 조파저항성능이 고속영역에서 개선되었음을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.945-948
• /
• 2008

내화 성능은 화재에 견디는 부재의 능력을 나타내는 하나의 척도이다. 콘크리트 기둥에서 내화성능은 많은 요인에 영향을 받는데, 주요 인자로는 강도, 밀도, 수분 상태, 화재 강도, 기둥의 크기 및 형상, 철근 상세, 하중 상태 및 골재 형태 등이 있다. 그런데, 고강도 콘크리트는 보통강도 콘크리트에 비하여 폭렬이 쉽게 발생하는 것으로 알려져 있다. 그리고 화재 시 고강도 콘크리트 기둥의거동은 이러한 폭렬에 큰 영향을 받는다. 따라서 폭렬제어를 위하여 PP섬유를 혼입하는 방법이 연구되고 있고 건설현장에서 성공적으로 적용되고 있다. 그런데 이러한 고강도 콘크리트의 내화 특성 향상뿐만 아니라 고강도 콘크리트 기둥의 내화 성능 평가 방법의 정립 또한 중요한 문제라고 할 수 있다. 따라서 본 연구에서는 폭렬이 제어된 고강도 콘크리트 기둥에 대하여 내화 성능 평가 방법에 따라 그 성능의 변화 양상에 대하여 연구를 수행하였다.

• Journal of Welding and Joining
• /
• 제27권1호
• /
• pp.65-70
• /
• 2009

Ir-192 radiation sealed sources are widely employed to the therapeutic applications as well as the non-destructive testing. Production of Ir-192 sources requires a delicate but robust welding technique because it is employed in a high radioactive working environment. A GTA(Gas Tungsten Arc) welding technique is currently well established for this purpose. However, this welding method requires a frequent replacement of the electrode, which results in the delay of the production to take a preparatory action such as to isolate the radiation sources from the working place before getting access to the welding machine. Hence, a resistance welding technique is considered as an alternative method of the GTA welding technique. The advantages of resistance welding are high welding speed and high-rate production. Also it has very long life of electrode comparing to GTA welding. In this study, the resistance welding system and proper welding conditions were established for sealing Ir-192 source capsule. As a results of various experiments, it showed that electrode displacement can be employed as a indicator to predict welding quality. We proposed two mathematical models(linear and curvilinear) to estimate electrode displacement with process parameters such as applied force, welding current and welding time by using regression analysis method. Predicting results of both linear and curvilinear model were relatively good agreement with experiment.

• 한국도로학회논문집
• /
• 제8권4호
• /
• pp.101-113
• /
• 2006

일반적으로 아스팔트 개질재의 경우 아스팔트 바인더의 고온 점성을 증가시킬 뿐만 아니라 믹싱 및 포설온도에서의 점도 또한 증가시켜 높은 생산온도 및 시공온도를 요구하게 된다. 이와 달리 Wax의 경우 아스팔트 바인더의 강성을 증가시키기도 하지만 일정 온도가 넘으면 물처럼 유동성을 확보해 믹싱 및 포설온도에서의 점도를 낮추어 작업성을 높이는 효과가 있다. 본 연구에서는 실내실험을 통해 PE Wax가 아스팔트 바인더에 첨가되었을 경우 그 특성을 분석하였다. 이를 위해 SBS, 폐타이어 고무분말 개질 아스팔트 바인더와 비교 분석하였다. 또한 Wax가 기존 개질재인 SBS, 폐타이어 고무분말과 함께 사용되었을 경우 그 효과를 분석하였다. 실험 결과, Wax type I은 내유동성 강화에 큰 효과가 있으며 작업성 개선에 약간의 효과가 있는 것으로 나타났다. Wax type II는 아스팔트 바인더의 작업성 개선에 크게 기여하고, 상온에서 부드러운 특성으로 균열에 대한 저항성을 증진시키는 것으로 나타났다.

• 대한소아치과학회지
• /
• 제24권2호
• /
• pp.405-421
• /
• 1997

The main purpose of this study was to evaluate the acid resistance and antimicrobial effect of fluoride-laser combined application. Recently extracted third molars were used. $5{\times}3mm$ of the buccal and lingual specimens were exposed and incipient artificial carious lesions were formed by keeping them in the artificial cariogenic solution for 5 days. They were divided into five groups and treated with fluoride and laser according to the predetermined regimen. The acid resistance was compared between groups by chemical quantitative analysis of the calcium and phosphorous released into the test solution after single or combined application of fluoride and laser. The antimicrobial effect of each group was analyzed by counting the number of colony forming units after microbial incubation. The results from the present study can be summarized as follows; 1. Experimental groups showed lower values in calcium and phosphorous contents as well as in $CFU/m{\ell}$(colony forming units) than control group. Combined application groups showed lower values than single application groups. 2. Acid resistance and antimicrobial effect by fluoride and laser treatment were confirmed in this study. 3. Based upon the above-mentioned results of this study, it can be assumed that the use of laser-fluoride combined application may provide the child and adolescent patient population with antimicrobial effect as well as acid resistance. Further studies using various materials and experimental conditions are being encouraged.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.566-570
• /
• 2001

Generally, grounding systems are responsible for the safe operation of a power system. Their performance guarantees equipment protection and personnel safety under condition of the limited ground potential rise and touch voltages as well as step voltages under ground fault conditions. Therefore, it is necessary to measure the ground resistance frequently for checking the performance of grounding system, In this paper the ground resistance measuring system using digital signal processor and high-performance L-C resonant band pass filter is presented. The signal current magnitude for measuring ground resistance in this system is $10^{-1}[A]\;to\;5\times10^{-2}[A]$ and the current frequency is 30[Hz].

• 수산해양기술연구
• /
• 제26권4호
• /
• pp.372-379
• /
• 1990

The effect of primary solidification phase on the solidification cracking sensitivity, corrosion resistance and toughness at cryogenic temperature was investigated for the austenitic stainless steel welds. The conclusions were summarized as follows; 1. Soldification crack sensitivity of austenitic stainless steel welds depends on the primary solidification mode. 2. Austenitic stainless steels were very susceptible to solidification cracking in case of solidification as primary ${\gamma}$ and immune when solidified as primary $\delta$. 3. When the ratio of Creq/Nieq is in the range of 1.46 to 1.55, the most resistance against solidification cracking was obtained. These results agreed well with the relationship between primary solidification mode, corrosion resistance and toughness at cryogenic temperature. 4. Optimum toughness, corrosion and solidification cracking resistance can be obtained when alloys having chemical compositions described above and solidifies as primary $\delta$ containing no ferrite at room temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.82-84
• /
• 2003

In case contact between point of contacts is not achieved well, contact resistance is grown, and by current concentration at current conducting contacts can weld. In order to decrease contact resistance between contacts in case of busbar, installing spring between fixed contact and moving contact. and then force on faying surface of contacts increase and contact resistance decrease. But, in case increase force of spring to widen contact area, operating force moving contact can grow, on the contrary force of spring is small, contact resistance becomes low. Therefore, need to optimize force and number of spring. position, and also need to examine force change on contact surface at point of contact moving. In this paper, dynamic kinetics analysis for force on faying surface of contacts is performed at unsteady state. It is showed to not uniform force on surface between contacts, and we can got more uniform force by means of change spring position.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.193-201
• /
• 1995

The role of thermal contact resistance between a casting and a metal mold as well as natural convection in the melt during solidification of a pure metal is numerically studied. Numerical simulation is performed for a rectangular cavity using the coordinate transformation by boundary-fitted coordinate and pure aluminum is used as the phase- change material. The influences of thermal contact resistance on the interface shape and position, solidified volume fraction, temperature field and local heat transfer are investigated.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.7-15
• /
• 2010

Recently, with the high performance and efficiency of machine, there have been required the multi-functions in various machine parts, such as the heat resistance, the abrasion resistance and the stress resistance as well as the strength. Fatigue crack growth tests were carried out to investigate the fatigue characteristics of high carbon steel (SM53C) experienced by high-frequency induction treatment. The Cam nose part of the Automobile's Cam shaft is strongly bumped with rocker arm or valve-lift. Therefore abnormal wear such as unfair wear and early wear occur in the surface. This abnormal wear causes a defect that bad timing open and close actions of the engine valve happen in the combustion chamber so the fuel gas will be combustion imperfect. Therefore, the cam shaft demands high hardness and wear resistance. In this study, high frequency heat treatment has been accomplished while wear test for material SM53C.