• Wind and Structures
• /
• v.4 no.3
• /
• pp.197-212
• /
• 2001

Observations of extreme wind speeds in the United Kingdom from 1970 to 1980, corrected for the influence of upwind ground roughness and topography, have been analysed using the recently-developed "Improved Method of Independent Storms" (IMIS). The results have been used to compile two new maps of base wind speed and to confirm the climatic factors in current use. One map is 'irrespective' of wind direction and the other is 'equally weighted' by direction. The 'equally weighted' map is expected to be more consistently reliable and appropriate for use with the climatic factors for the design of buildings and structures.

• Communications for Statistical Applications and Methods
• /
• v.4 no.1
• /
• pp.21-32
• /
• 1997

Robust regression based on M-estimator reduces and/or bounds the influence of outliers in the y-direction only. Therefore, when several influential observations exist, diagnostics in the robust regression is required in order to detect them. In this paper, we propose influence diagnostics in the robust regression based on M-estimator and its one-step version. Noting that M-estimator can be obtained through iterative weighted least squares regression by using internal weights, we apply the weighted least squares (WLS) regression diagnostics to robust regression.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.726-729
• /
• 1996

A weighted impact ellipsoid normalized by maximum allowable angular velocity changes is defined and compared with conventional impact ellipsoids and impact polytopes. The results shows that the conventional impact ellipsoid may give false solution as far as the optimal direction of motion is concerned.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_1
• /
• pp.431-437
• /
• 2013

Landslides are caused by earthquakes or heavy rains. Recently the incidence of landslides has been increased. However, it is impossible to predict the occurrence of landslide exactly. The purpose of this research is that subdivide the classes of elements in the landslide management system by using spatial analysis technique and AHP method. The existing landslide management system is only comprised of weighted value the slope elements without weighted value about the slop direction elements. For the accuracy improvement in landslide occurrence point, weighted value about the slope direction should be considered. This research is focused on segmentation in slope direction three categories. If the direction of landslide does not affect the structure, I do not think the subject is worth considerating. Based on these results will discuss the improvements in Landslides management systems. Analysis results, segmentation on the slope and the slope direction are needed. Segmented categories about topography elements will be increase the accuracy of landslides management system. Also, since topography of the elements is only considered, segmentation of different elements is needed.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.39 no.1
• /
• pp.1-12
• /
• 2014

This article proposes a variable sampling interval (VSI) $\bar{X}$ control chart using weighted standard deviation (WSD) method for skewed populations. The WSD method decomposes the standard deviation of a quality characteristic into upper and lower deviations and adjusts control limits and warning limits of a control chart in accordance with the direction and degree of skewness. A control chart constant is derived for estimating the standard deviation of skewed distributions with the mean of sample standard deviations. The proposed chart is compared with the conventional VSI $\bar{X}$ control chart under some skewed distributions. Simulation study shows that the proposed WSD VSI chart can control the in-control average time to signal (ATS) as an adequate level better than the conventional VSI chart, and the proposed chart can detect a decrease in the process mean of a quality characteristic following a positively skewed distribution more quickly than the standard VSI chart.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.197-205
• /
• 2007

We have proposed a novel line detection method based on the estimated probability density function of gradient directions of edges. By estimating peaks of the density function, we determine groups of edges that have the same gradient direction. For edges in the same groups, we detect lines that correspond to peaks of the connectivity weighted distribution of the distances from the origin. In the experiments using the Data Matrix barcode images and LCD images, the proposed method showed better performance than conventional Methods in terms of the processing speed and accuracy.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.155-158
• /
• 2001

A new method for simultaneous multiple transmit focusing using orthogonal weighted FM chirp is proposed. Weighted chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in the approximate sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels, and the crosscorrellation function of any pair of the signals has smaller values than the sidelobe levels of each autocorrelation function. This means that each weighted chirp signal can be separately compressed into a short pulse, focused individually and combined with other focused beams to form a frame of image. Theoretically, any two chirp signals defined in two nonoverlapped frequency bands are mutually orthogonal. In the present work, however, a fractional overlap of adjacent frequency bands, by up to 25%, were permitted to design more chirp signals within a given transducer bandwidth. The crosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals. The simulation results show that this method can improve the lateral resolution of image without sacrifice in the frame rate compared with the conventional pulse system.

• Korean Journal of Materials Research
• /
• v.33 no.5
• /
• pp.205-213
• /
• 2023

This paper reports the results of an experimental examination using X-rays to test annealing materials for lapped bearing steel (STB2), to confirm the validity of the weighted averaging analysis method. The distribution behavior for the α_𝜓-sin²𝜓 diagram and the presence or absence of differences in the peak method, half-value breadth method, and centroid method were investigated. When lapping the annealed bearing steel (STB2) material, a residual stress state with a non-directional steep gradient appeared in the surface layer, and it was found that the weighted averaging analysis method was effective. If there is a steep stress gradient, the sin²𝜓 diagram is curved and the diffraction intensity distribution curve becomes asymmetric, resulting in a difference between the peak method, half-value breadth method, and centroid method. This phenomenon was evident when the stress gradient was more than 2~3 kg/mm²/㎛. In this case, if the position of the diffraction line is determined using the centroid method and the weighted averaging analysis method is applied, the stress value on the surface and the stress gradient under the surface can be obtained more accurately. When the stress gradient becomes a problem, since the curvature of the sin²𝜓 diagram appears clearly in the region of sin²𝜓 > 0.5, it is necessary to increase the inclination angle 𝜓 as much as possible. In the case of a lapping layer, a more accurate value can be obtained by considering 𝜎₃ in the weighted averaging analysis method. In an isotropic biaxial residual stress state, the presence or absence of 𝜎₃ can be determined as the presence or absence of strain for sin²𝜓≈0.4.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.11
• /
• pp.39-54
• /
• 2018

Purpose - To success, in spite of deficient resources, a start-up company has to check various circumstances. Many researchers proposed different appraisal methods for technology commercialization. But everybody agrees Merrifield is the first one, who is a pioneer of an appraisal model of technology commercialization. After he proposed it, many researchers and field workers developed a more complicated model, which called a BMO model. In this research, considering the circumstances of start-ups that lack available resources, it proposes a new appraisal method for technology commercialization, which is named a weighted-BMO model. Research design, data, and methology - For the new BMO-model, it studied the preceding studies. And it found that the success factors for start-ups were correlated with technology commercialization. After comparing the success factors for technology commercialization of start-ups with BMO appraisal factor, it withdraws the net BMO appraisal model: which we are calling the weighted-BMO model. Results - This study found a few things. First, actually, the BMO appraisal factors related with the success factors of technology commercialization. Second, the weighted-BMO model, which included the entrepreneur ability factor, was more accurately estimated the success of technology-based start-ups than the BMO model. Third, it overcame the weakness of the BMO-model, which did not include quantitative factors. In addition to evaluating the feasibility of the BMO model, we also presented a strategy for the future direction. But, still, it included a few shortcomings, which we are calling the arbitrage of weighted value. Sometimes, the intentional weighted value can deliberate the different valuation. Conclusitons - Due to this study, the weighted-BMO model included appraisal factors related with the success factors of technology commercialization and the entrepreneur ability factor, and quantitative factors. When evaluating the combined score of the existing Merrified BMO components, 35 points of the first pass criterion accounted for 29.17% of the total score, and 80 points of the merit score of the second rank criterion were 66.67% Considering that the weighted sum is taken into account, the baseline score of the weighted summing method for each component of the modified BMO model is 2.92 points, which is 29.17% of the weighted sum total of 10 points. The evaluation score was 6.67 points, 66.67% of the weighted total score of 10 points.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.93-99
• /
• 2012

This study aims to identify spatio-temporal land price change pattern in Gongju city including the area incorporated and surrounding area depending on the Multifunctional Administrative City Construction. For this, GIS data was built by calculating the average land price each 209 Dong and Ri by the time of the year 2000, 2005 and 2010 based on. The first, the change in the land price was to identify in the 5-year intervals through a kriging interpolation as a kind of geostatistical techniques. The second, a trend analysis was conducted to know directional change pattern of the east-west axis and the north-south axis. Finally, the weighted mean center was calculated by the land price at a weight to examine moving direction on the center point of land price, point of view. The result is that the land price change pattern appeared visible higher growth on the eastern built in the Multifunctional Administrative City, moving direction on the center point of the land price appeared that the phenomenon was concentrated in the northeastern area.