• 제목/요약/키워드: Weight of Crown Part

검색결과 18건 처리시간 0.027초

노두무게에 따른 북강활의 생육 및 추대반응 (Effect of Weight of Crown Part on Growth and Bolting Response in Ostericum koreanum Kitagawa.)

  • 김수용;이상석;최효심;손형락;오세명
    • 한국약용작물학회지
    • /
    • 제17권3호
    • /
    • pp.161-164
    • /
    • 2009
  • This study was conducted to investigate the weight of crown part effect on growth and bolting response of Ostericum koreanum Kitagawa. Bolting rate with crown part weight was represented 0%, 0%, 4.1%, 12.9%, 25.1%, 34.9% corresponding to each crown part weight 5 g, 10 g, 20 g, 30 g, 40 g, 50 g. The heavier the crown part weight was the higher the direction rate rose and the flowering time came earlier. The dried root amount was the highest at 30 g and crown part number, the length of root, and crown diameter showed all the highest figures at 30 g. The relation between amount per 10 g and outcrop weight increased on secondary regression formula as weight increased and reached its peak at 29.7 g and then decreased over 29.7 g.

완도지역 붉가시나무의 개화특성과 종실생산 (Flowering Characteristics and Acorn Production of Quercus auta Thunb. in Wando Island, Korea)

  • 박인협;김소담;박종원;채경석;김갑태;엄태원
    • 한국환경생태학회지
    • /
    • 제28권3호
    • /
    • pp.326-330
    • /
    • 2014
  • 완도수목원내 백운로 상부의 붉가시나무림을 대상으로 붉가시나무의 개화특성과 종실생산을 조사하였다. 개화특성은 개화기인 5월에 평균 흉고직경급에 속하는 임목 중 개화가 충실한 임목 3주의 표본목을 선정 벌목하여 조사하였다. 종실생산은 $20m{\times}25m$ 방형구 8개를 설정하고, 가로 1m, 세로 1m, 높이 1.5m의 종자트랩을 방형구당 3개씩 총 24개 설치하여 조사하였다. 암꽃의 모지당 잎과 화서의 수, 수꽃의 모지당 화서의 수는 수관 상, 중, 하부간 유의적인 차이는 없었으나 수관 상부에서 하부로 갈수록 감소하는 경향이었다. 임목당 암꽃 수는 5,025개이었으며, 수관 상, 중, 하부에 각각 60.3%, 28.4%, 11.3% 분포하고 있었다. 임목당 수꽃의 화서 수는 7,063개이었으며 수관 상, 중, 하부에 각각 51.6%, 26.5%, 21.9% 분포하고 있었다. 종자트랩 24개 전체의 종실생산량은 947립/$24m^2$이었으며, 건전, 충해, 부후, 쭉정이 종실의 구성비는 각각 11.0%, 61.9%, 25.1%, 2.0%이었다. 월별 전체 종실량은 8, 9, 10, 11, 12월에 각각 240립/$24m^2$, 632립/$24m^2$, 56립/$24m^2$, 17립/$24m^2$, 2립/$24m^2$이었다. 건전 종실이 없는 12월을 제외한 8, 9, 10, 11월에 낙하된 건전 종실의 평균 길이는 각각 15.5mm, 16.5mm, 20.9mm, 19.1mm, 평균 지름은 각각 11.1mm, 10.6mm, 13.8mm, 10.8mm, 평균 무게는 각각 0.84g, 0.66g, 1.87g, 1.36g이었다. 붉가시나무는 9월에 종실 낙하량이 가장 많으며, 종실의 크기와 무게는 10월에 낙하한 종실이 최대치를 보였다.

디젤 엔진용 일체형 스틸 단조피스톤 공정 개발에 관한 연구 (A Study on the Process Development of Mono Steel Forged Piston for Diesel Engine)

  • 염성호;남경오;황두순;권혁선;홍성인
    • 한국자동차공학회논문집
    • /
    • 제14권3호
    • /
    • pp.44-50
    • /
    • 2006
  • The mono steel forged piston was improved a mechanical strength of an aluminum piston and reduced the weight of a articulated piston. The mono steel forged piston was composed of forged crown part and forged skirt part and was completed by friction welding process of two forged parts. Forging process analysis and friction welding analysis was done by finite element simulation using numerical package DEFORM. The preform shape and the initial billet dimension were decided by maximum stress of the die, amount of the flash and filling of die. The upset length of friction welding variable was decided by the shape of the flash that was created by friction welding analysis. Through this research, we developed a forging process of the mono steel forged piston, and decided the design variables of friction welding.

딸기 '매향'과 '설향'의 육묘기 자묘 적엽이 생육 및 수량에 미치는 영향 (Changes in Growth and Yield of Strawberry (cv. Maehyang and Seolhyang) in Response to Defoliation during Nursery Period)

  • 김대영;김태일;김운섭;강윤임;윤형권;최종명;윤무경
    • 생물환경조절학회지
    • /
    • 제20권4호
    • /
    • pp.283-289
    • /
    • 2011
  • 국내에서 육성된 딸기 품종인 '매향' 및 '설향'을 대상으로 비가림 포트 육묘 시 자묘 적엽에 따른 묘소질과 개화 및 수량에 미치는 영향을 조사하였다. 딸기 연결 포트에 자묘 받기를 완료한 후 7월 하순부터 정식 전까지 10일 간격으로 4~5회에 걸쳐 완전히 전개된 엽을 기준으로 2매, 3매, 4매를 남기고 적엽하였고 대조구로 무적엽구를 두어 실험을 수행하였다. 적엽의 강도가 강할수록 엽병장이 감소하여 자묘의 도장을 억제시킬 수 있었다. 관부 외경은 적엽 처리구에서 유의하게 감소하였으나 관부 내경은 유의한 차이가 없었다. 1차 근수는 3매 또는 4매 적엽 처리구에서 전반적으로 증가하는 경향을 보였지만 처리구 간에 유의한 차이는 없었다. 생체중, 엽면적은 적엽 처리구에서 유의하게 감소하였고 근중은 일부 3매 또는 4매 적엽 처리구에서 높게 나타났으나 처리구간에 유의한 차이를 보이지 않았다. 적엽은 지하부에 비해서 지상부의 생육을 억제하여 증산량 감소에 의한 정식 후 활착이 보다 용이할 것으로 생각된다. 엽록소 함량의 경우 적엽의 강도가 강할수록 유의하게 감소하는 경향을 보였는데, 적엽 시 체내 질소를 효과적으로 감소시킴으로 서 저온 단일 조건에서의 화아분화를 촉진하고 포장내 균일한 개화를 유도하였다. 상품과 수량은 3매 적엽 처리구에서 무적엽 처리구에 비하여 높은 경향을 보였다.

독일가문비나무(Picea abies [L.] Karst)의 지상부(地上部)와 지하부(地下部) 생체량(生體量)에 관(關)한 연구(硏究) : 흉고직경(胸高直徑)에 의한 뿌리생체량(生體量) 추정(推定) (Relationship Between Above-and Below-Ground Biomass for Norway Spruce (Picea abies) : Estimating Root System Biomass from Breast Height Diameter)

  • 이도형
    • 한국산림과학회지
    • /
    • 제90권3호
    • /
    • pp.338-345
    • /
    • 2001
  • 본 연구는 독일가문비나무의 지하부인 뿌리구조와 지상부인 수관과의 상호관계를 밝혀, 어렵게 뿌리를 굴취하거나 침엽 생체량을 측정하지 않고도 수고와 흉고직경에 의한 상대적인 뿌리와 침엽 생체량 추정을 위한 회귀식을 구하기 위하여 실시하였다. 독일 중부 Harz 지방의 Barbis 임분에서 30~40년생의 우세목 5본과 준우세목 3본을 선발한 후 조사목의 지상부에 대하여 수고, 흉고직경, 지하고, 침엽량, 가지량, 횡단면, 변재면 등을 조사하였다. 그리고 5본에 대해서는 지하부의 뿌리길이, 뿌리수, 뿌리무게, 뿌리횡단면 등을 수평과 수직뿌리로 구분하여 조사하였다. 조사된 염분에서 독일가문비나무의 지상부(수고, 흉고직경, 침엽량, 가지량 등)와 지하부(뿌리길이, 무게, 수, 횡단면 등) 생체량 사이에는 서로 밀접한 상관을 나타내었다. 측정이 용이한 흉고직경에 대한 지하부 뿌리생체량은 Y = 3.56X - 45.94의 관계식으로 결정계수가 0.96으로 매우 높은 상관관계를 나타내었다. 가지량, 침엽량과 수고에 있어서도 지하부 생체량과 높은 상관관계를 나타내었다. 본 연구에서 얻어진 회귀식은 30~40년생 독일 가문비나무 임분에서 흉고직경을 이용하여 지하부의 상대적인 뿌리 생체량을 추정하는데 유용하게 이용될 수 있을 것이다.

  • PDF

Comparison of the fit accuracy of zirconia-based prostheses generated by two CAD/CAM systems

  • Ha, Seok-Joon;Cho, Jin-Hyun
    • The Journal of Advanced Prosthodontics
    • /
    • 제8권6호
    • /
    • pp.439-448
    • /
    • 2016
  • PURPOSE. The purposes of this study are to evaluate the internal and marginal adaptation of two widely used CAD/CAM systems and to study the effect of porcelain press veneering process on the prosthesis adaptation. MATERIALS AND METHODS. Molar of a lower jaw typodont resin model was prepared by adjusting a 1.0 mm circumferential chamfer, an occlusal reduction of 2.0 mm, and a $5^{\circ}$ convergence angle and was duplicated as an abrasion-resistant master die. The monolithic crowns and copings were fabricated with two different CAD/CAM system-Ceramil and Zirkonzahn systems. Two kinds of non-destructive analysis methods are used in this study. First, weight technique was used to determine the overall fitting accuracy. And, to evaluate internal and marginal fit of specific part, replica technique procedures were performed. RESULTS. The silicone weight for the cement space of monolithic crowns and copings manufactured with Ceramil system was significantly higher than that from Zirkonzahn system. This gap might cause the differences in the silicone weight because the prostheses were manufactured according to the recommendation of each system. Marginal discrepancies of copings made with Ceramil system were between 106 and $117{\mu}m$ and those from Zirkonzahn system were between 111 and $115{\mu}m$. Marginal discrepancies of copings made with Ceramil system were between 101 and $131{\mu}m$ and those from Zirkonzahn system were between 116 and $131{\mu}m$. CONCLUSION. Marginal discrepancy was relatively lower in Ceramil system and internal gap was smaller in Zirkonzahn system. There were significant differences in the internal gap of monolithic crown and coping among the 2 CAD/CAM systems. Marginal discrepancy produced from the 2 CAD/CAM systems were within a reported clinically acceptable range of marginal discrepancy.

Light intensity inside plastic house influences the growth and nutrient uptake of daughter plants in nursery and early stages after transplanting in strawberry propagation

  • Gab Soon Park;Hyoung Je Yoo;Gil Hwan Bae;Seung Ho Jeong;In Sook Park;Jong Myung Choi
    • 농업과학연구
    • /
    • 제49권4호
    • /
    • pp.697-706
    • /
    • 2022
  • The effect of varied light intensities on the growth of daughter plants during propagation and after transplant to raised beds were examined in 'Sulhyang' strawberry. To this end, four treatments in controlling solar radiation inside a plastic house were made: 55% retractable shading and 35, 55, and 75% fixed shading. The plastic house was shaded only from 11:00 to 16:00 in June and 10:00 to 16:00 in July to September for the treatment of 55% retractable shading. The mean solar radiation inside the plastic house in the retractable 55% shading treatment was 317 W·m-2 and those in the 35, 55, and 75% fixed shading treatments were 183, 165, and 116 W·m-2, respectively, at 10 o'clock in the morning. The 55% and 75% fixed shading resulted in taller daughter plants with wider leaf areas than 55% retractable shading. The retractable shading also showed higher leaf numbers, crown diameters, root weights, and fresh weights compared to fixed shading treatments. Regarding the inorganic element contents, daughter plants grown under 75% fixed shading had 1.35% total nitrogen content followed by 1.19% in 35% fixed shading, 1.14% in 55% fixed shading, 1.14% in open culture, and 1.10% in 55% fixed shading. After 54 days following the transplant of daughter plants to a raised bed, the fresh weight of the aboveground part was the heaviest in the 55% retractable shading and non-shading treatments. The 75% fixed shading treatment had the lowest fresh weight of the aboveground plant parts. The results of this study could be used for the production of high-quality daughter strawberry plants.

잣나무넓적잎벌 피해(被害)가 잣나무생장(生長)에 미치는 영향(影響)에 관(關)한 연구(硏究) (Studies on the Effects of Black-tipped Sawfly, Acantholyda posticalis posticalis Matsumura on the Growth of the Korean White Pine, Pinus koraiensis S. et Z.)

  • 정상배;신상철
    • 한국산림과학회지
    • /
    • 제83권4호
    • /
    • pp.450-459
    • /
    • 1994
  • 본(本) 연구(硏究)는 최근(最近) 잣나무넓적잎벌의 피해(被害)가 급진적(急進的)으로 확산(擴散)되고있는 경기도(京畿道) 가평군(加平郡)과 강원도(江原道) 홍천군(洪川郡)의 2개(個) 피해임분(被害林分)에 대(對)한 피해해석(被害解析)을 통(通)하여 경제적(經濟的) 피해허용수준(被害許容水準)을 결정(決定)하고 해충(害蟲) 관리(管理)를 위한 종합적(綜合的) 체계수립(體系樹立)의 기초자료(基礎資料)를 얻고자 1984년(年)부터 4개년간(個年間) 실시(實施)하여 다음과 같은 결과(結果)를 얻었다. 1. 임목(林木)의 피해양상(被害樣狀)은 수관(樹冠) 하부(下部) 보다는 상부(上部)에서 심(甚)하게 나타나며 지상부(地上部) 건물질량(乾物質量)의 수직(垂直) 분포(分布)는 건전목(健全木)의 C형(型) 분포(分布)에서 피해(被害)가 증가(增加)할수록 L형(型) 분포화(分布化) 되었다. 2. 잣나무넓적잎벌 피해(被害)로 인(因)한 엽손실(葉損失)은 수고생장(樹高生長)과 직경생장(直徑生長)의 저해(沮害)를 동시(同時)에 일으키며 생장저해(生長沮害)는 엽손실율(葉損失率) 50% 수준(水準)에서 부터 일어나며 이때의 생장감소율(生長減少率)은 10% 내외(內外)였다. 3. 잣나무넓적잎벌 피해(被害)로 인(因)한 직경생장(直徑生長) 감소(減少)는 수관(樹冠) 상부(上部)에서 현저(顯著)하며 하부(下部)로 갈수록 낮은 감소율(減少率)을 보였다. 4. 엽손실(葉損失)에 의한 재적생장(材積生長) 손실(損失)은 피해발생(被害發生) 3년(年) 후(後)인 엽손실율(葉損失率) 50% 범위(範圍)에서 나타났으며 70% 및 90% 피해목(被害木)의 총재적(總材積) 손실율(損失率)은 건전목(健全木)에 비(比)하여 각각(各各) 9%와 20%였다.

  • PDF

딸기 '매향'과 '설향'의 육묘기 런너의 절단 시기가 생육 및 수량에 미치는 영향 (Effect of Runner Cutting Time on Growth and Yield during Nursery of Strawberry (cv. Maehyang and Seolhyang))

  • 김대영;김수;강윤임;윤형권;윤무경;김태일;최종명
    • 생물환경조절학회지
    • /
    • 제21권4호
    • /
    • pp.385-391
    • /
    • 2012
  • 국내에서 육성된 딸기 품종인 '매향' 및 '설향'을 대상으로 비가림 포트 육묘 시 런너의 절단 시기에 따른 자묘의 생육과 정식 후 수량을 2작기(2009년 및 2010년)에 걸쳐 검토하였다. 자묘는 정식일(2009년 9월 11일 및 2010년 9월 10일)을 기준으로 30일, 20일, 10일 및 5일 전에 모주로부터 런너를 절단하였다. 런너의 절단 시기가 늦을수록 모주에서 양수분이 육묘 후기까지 자묘로 공급되어 지상부 생체중, 관부직경 및 엽록소 함량은 증가하는 경향을 보였다. 반면에 근중 등 지하부 생육은 런너의 절단 시기가 빨라서 모주로부터 자묘의 독립 기간이 길수록 증가하였다. 모주에서 런너를 절단한 경우의 관수 요구량이 런너를 절단하지 않은 처리구에 비하여 29.7% 증가하였다. 또한, 런너를 절단하였을 경우에 런너를 통하여 탄저병이 침입한 경우가 런너를 절단하지 않은 처리구에 비하여 37.6% 높게 나타났다. 정식 후 정화방의 출뢰 및 개화 개시기는 런너 절단 시기가 늦을 경우 2~3일까지 지연되었으나 런너 절단 시기에 따른 조기 수량의 차이가 없으므로 런너 절단 시기를 정식일의 5~10일 전인 8월 하순 이후로 늦추어 실시하는 것이 탄저병 발생 경감 측면에서는 유리한 것으로 생각된다.