• Korean Journal of Medicinal Crop Science
• /
• v.17 no.3
• /
• pp.161-164
• /
• 2009

This study was conducted to investigate the weight of crown part effect on growth and bolting response of Ostericum koreanum Kitagawa. Bolting rate with crown part weight was represented 0%, 0%, 4.1%, 12.9%, 25.1%, 34.9% corresponding to each crown part weight 5 g, 10 g, 20 g, 30 g, 40 g, 50 g. The heavier the crown part weight was the higher the direction rate rose and the flowering time came earlier. The dried root amount was the highest at 30 g and crown part number, the length of root, and crown diameter showed all the highest figures at 30 g. The relation between amount per 10 g and outcrop weight increased on secondary regression formula as weight increased and reached its peak at 29.7 g and then decreased over 29.7 g.

• 한국약용작물학회:학술대회논문집
• /
• 2007.05a
• /
• pp.99-100
• /
• 2007

• Korean Journal of Environment and Ecology
• /
• v.28 no.3
• /
• pp.326-330
• /
• 2014

Flowering characteristics and acorn production of Quercus acuta were studied in a Quercus acuta forest at Wando island, Korea. Three sample trees were cut and measured to investigate flowering characteristics during flowering season. Eight $20m{\times}25m$ quadrats were set up and three $1m{\times}1m$ seed traps were established within each quadrat to investigate acorn production. There were no significant differences in number of female and male inflorescence per bearing shoot among crown positions, but these values decreased from the upper part to the lower part of crown. The number of female flowers was 5,025 flowers/tree, and of the total number, 60.3% was in the upper part, 28.4% was in the middle part and 11.3% was in the lower part of crown. The number of male flowers was 7,063 flowers/tree and increased from the lower part to the upper part of crown. Acorn production of total 24 seed traps was 947 acorns/$24m^2$, and of total acorn production, 11.0% was sound, 61.9% was damaged, 25.1% was decayed and 2.0% was empty. Monthly acorn production was 240 acorns/$24m^2$ in August, 632 acorns/$24m^2$ in September, 56 acorns/$24m^2$ in October, 17 acorns/$24m^2$ in November and 2 acorns/$24m^2$ in December. Acorns fallen in October showed higher mean length, diameter and weight than those of other months.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.44-50
• /
• 2006

The mono steel forged piston was improved a mechanical strength of an aluminum piston and reduced the weight of a articulated piston. The mono steel forged piston was composed of forged crown part and forged skirt part and was completed by friction welding process of two forged parts. Forging process analysis and friction welding analysis was done by finite element simulation using numerical package DEFORM. The preform shape and the initial billet dimension were decided by maximum stress of the die, amount of the flash and filling of die. The upset length of friction welding variable was decided by the shape of the flash that was created by friction welding analysis. Through this research, we developed a forging process of the mono steel forged piston, and decided the design variables of friction welding.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.283-289
• /
• 2011

This study was conducted to examine the effects of defoliation treatment on the growth and yield of strawberry ($Fragaria{\times}ananassa$ cv. Maehyang and Seolhyang) during nursery period. Leaves of strawberry plantlet had been removed except two, three and four fully expanded leaves until planting date. As the intensity of defoliation was strong, the petiole length was reduced and overgrowth of strawberry plantlet was suppressed. Outer diameter of crown in defoliation treatments significantly decreased but inner diameter of crown was not significant. Number of primary roots of the 3 leaves or 4 leaves defoliation treatment generally tended to increase, but there was not significantly different among treatments. Fresh weight and leaf area in the defoliation treatments significantly decreased and the root weight were higher in partial 3 leaves or 4 leaves defoliation treatment but was not significantly different among treatments. Because T/R ratio decreased significantly as growth inhibition of above-ground part compared to underground part, it is considered easy to take rooting after plantlet plating. As the intensity of defoliation was strong, chlorophyll contents tended to decrease significantly. Reduction of the endogenous nitrogen by defoliation effectively led to promote floral differentiation at low temperature and short day condition. This promoted timing of budding and flowering and also induced uniform flowering after plantlet planting. Marketable fruit yield of 3 leaves defoliation treatment tended to be higher than the control.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.338-345
• /
• 2001

This study was conducted to elucidate the relationship between the root structure and the crown structure of Norway spruce(Picea abies [L.] Karst), and thereafter to obtain the regression equation for the estimation of relative root and needle biomass using the tree height and diameter at breast height(DBH) without measurement of root and needle biomass. The study site was Barbis stands of Harz region located in central part of Germany. Five dominant and three co-dominant trees of 30 to 40 year-old Norway spruce were selected and tree height, diameter at breast height, clear bole length, weight of total needle and branch, cross section and sapwood area at breast height for biomass of above ground part and also the length of root, the number of root, the weight of root, the cross section area of root etc. by dividing the horizontal and vertical roots for below ground part of tree were measured. The significantly correlation was shown between the biomass of most of variables of above ground parts and those of below ground parts. For the diameter of breast height to the weight of total root, regression equation was Y = 3.56X - 45.94 and decision coefficient was 0.96 showing highly correlation. The weight of total branches and needles, and the tree height etc. of above ground parts showed highly positive relationship with below ground biomass. The results obtained from this study can be used to the estimating of biomass of below ground using variables of above ground such as DBH in the 30 to 40 year-old Norway spruce stands.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.439-448
• /
• 2016

PURPOSE. The purposes of this study are to evaluate the internal and marginal adaptation of two widely used CAD/CAM systems and to study the effect of porcelain press veneering process on the prosthesis adaptation. MATERIALS AND METHODS. Molar of a lower jaw typodont resin model was prepared by adjusting a 1.0 mm circumferential chamfer, an occlusal reduction of 2.0 mm, and a $5^{\circ}$ convergence angle and was duplicated as an abrasion-resistant master die. The monolithic crowns and copings were fabricated with two different CAD/CAM system-Ceramil and Zirkonzahn systems. Two kinds of non-destructive analysis methods are used in this study. First, weight technique was used to determine the overall fitting accuracy. And, to evaluate internal and marginal fit of specific part, replica technique procedures were performed. RESULTS. The silicone weight for the cement space of monolithic crowns and copings manufactured with Ceramil system was significantly higher than that from Zirkonzahn system. This gap might cause the differences in the silicone weight because the prostheses were manufactured according to the recommendation of each system. Marginal discrepancies of copings made with Ceramil system were between 106 and $117{\mu}m$ and those from Zirkonzahn system were between 111 and $115{\mu}m$. Marginal discrepancies of copings made with Ceramil system were between 101 and $131{\mu}m$ and those from Zirkonzahn system were between 116 and $131{\mu}m$. CONCLUSION. Marginal discrepancy was relatively lower in Ceramil system and internal gap was smaller in Zirkonzahn system. There were significant differences in the internal gap of monolithic crown and coping among the 2 CAD/CAM systems. Marginal discrepancy produced from the 2 CAD/CAM systems were within a reported clinically acceptable range of marginal discrepancy.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.697-706
• /
• 2022

The effect of varied light intensities on the growth of daughter plants during propagation and after transplant to raised beds were examined in 'Sulhyang' strawberry. To this end, four treatments in controlling solar radiation inside a plastic house were made: 55% retractable shading and 35, 55, and 75% fixed shading. The plastic house was shaded only from 11:00 to 16:00 in June and 10:00 to 16:00 in July to September for the treatment of 55% retractable shading. The mean solar radiation inside the plastic house in the retractable 55% shading treatment was 317 W·m^-2 and those in the 35, 55, and 75% fixed shading treatments were 183, 165, and 116 W·m^-2, respectively, at 10 o'clock in the morning. The 55% and 75% fixed shading resulted in taller daughter plants with wider leaf areas than 55% retractable shading. The retractable shading also showed higher leaf numbers, crown diameters, root weights, and fresh weights compared to fixed shading treatments. Regarding the inorganic element contents, daughter plants grown under 75% fixed shading had 1.35% total nitrogen content followed by 1.19% in 35% fixed shading, 1.14% in 55% fixed shading, 1.14% in open culture, and 1.10% in 55% fixed shading. After 54 days following the transplant of daughter plants to a raised bed, the fresh weight of the aboveground part was the heaviest in the 55% retractable shading and non-shading treatments. The 75% fixed shading treatment had the lowest fresh weight of the aboveground plant parts. The results of this study could be used for the production of high-quality daughter strawberry plants.

• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.450-459
• /
• 1994

The damage by the black-tipped sawfly, Acantholyda posticalis posticalis Matsumura, has been increasing at several locations in central part of the Korean peninsula. This study was undertaken at selected plots in Kapyung-gun, Kyunggi Province and Hongchon-gun, Kangwon Province from 1984 to 1987. The purpose of this study was to provide basic information for integrated control of this pest and to determine the economic threshold by investigating the pest host interactions with special reference to damage analysis. The results obtained were as follows ; 1. The damage was more severe at upper part than at lower part of the crown. The vertical distribution of dry weight of damaged trees above ground showed L-type distribution, whereas that of healthy trees showed C-type distribution. 2. The needle loss by sawfly reduced both of height and the diameter growth of the main stem. The growth reduction occurs when the needle loss is 50% or higher. About 10% of tree growth was reduced at 50% of needle loss. 3. The reduction of diameter growth was more severe at upper part than at lower part of the main stem. 4. Volume growth was reduced when more than 50% of the needles were damaged after three years of the sawfly infestation. Reductions of total volume increment at the levels 70% and 90% of needle damage were 9% and 20%, respectively.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.385-391
• /
• 2012

This study was conducted to investigate the effects of the runner cutting time on the growth and yield of strawberry (Fragaria ${\times}$ ananassa cv. Maehyang and Seolhyang) during nursery period of two consecutive years (2009 and 2010). Strawberry runners which connected from mother plants to daughter plants were cut 30, 20, 10 and 5 days before transplanting day (11 Sep. 2009 and 10 Sep. 2010). When runner cutting time delayed, more nutrition was supplied to the daughter plant until late nursery period. It showed that there was a tendency to increase the fresh weight, crown diameter and leaf chlorophyll content. On the other hand, when the runner was cut earlier, the growth of underground part such as root weight was improved. Irrigation demand increased to 29.7% in case of runner cutting from mother plant compared with runner non-cutting treatment. In addition, infection ratio of anthracnose through runner part was 37.6% higher in case of runner cutting than that of runner non-cutting treatment. After transplanting, budding and flowering period were delayed up to 2 or 3 days because of late runner cutting. But there was no significant difference in marketable fruit yield among runner cutting times. It is recommended to conduct runner cutting 5 or 10 days before transplanting for reducing the occurrence of anthracnose.