• Journal of Magnetics
• /
• v.12 no.4
• /
• pp.156-160
• /
• 2007

In this paper, we analyze the errors associated with magnetic field interference for fiber-optic current sensors working in a three-phase electric system and provide a solution to compensate the interference. For many practical conductor arrangements, the magnetic filed interference may cause errors unacceptable for the accuracy requirements of the sensors. We devised a real time compensation method for the interference by introducing geometric and weight factors. We realized the method using simple electronic circuits and obtained the real time compensated outputs with errors of ${\pm}1%$.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.913-916
• /
• 2020

In this paper, we propose the development of nitrogen cooling equipment for personalized local area. The proposed equipment consists of a cold air supply module, a body, and nitrogen injection with the following characteristics. First, it automatically controls the amount and time of cold air supply by utilizing information measuring skin temperature with volumetric temperature sensors, so it can have a competitive edge in function by ensuring complete safety. Second, if the distance measuring sensor is applied to the skin for more than a certain distance, it can block the cold air or control the discharge of nitrogen in conjunction with the control GUI to improve the efficiency of higher cooling therapy while providing safe management. Third, by installing a control module that can control the supply of nitrogen, the cost of maintenance can be minimized by minimizing the loss of nitrogen. Experiments at an external testing agency to evaluate the performance of the proposed equipment showed that the accuracy of the temperature sensor was measured in the range of ±3.8%, which is lower than the world's highest level(±5%), with a range of 110℃ to -160℃ similar to the world's highest level. Distance accuracy was measured in the range of ±3.0%, lower than the world's highest level(±5%), and weight accuracy in the range of ±0.1%, lower than the world's highest level(±5%). In addition, emission control was measured in four stages, higher than the world's highest level(stage 1) and nitrogen use was measured at 0.8L/min below the world's highest(6L/min). Therefore, the effectiveness of the methods proposed in this paper was demonstrated because they produced the same results as the world's highest levels.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.2
• /
• pp.152-158
• /
• 2003

Titration method is one of the widely used methods for the concentration measurement of absorbent ammonia/water. However, this method is inconvenient because the solution should be extracted for the measurement. Moreover, significant error can be introduced by the evaporation of ammonia during the sampling and measuring procedure. In this study a reliable in-line concentration measurement method was proposed. To prove the validity of the concept, a measuring apparatus was designed, built, and tested with water. It is found that the location of flow inlet and exit is important in the measurement accuracy. The flow inlet and exit located in the middle of the test cell showed the best result. By the error analysis, it is expected that the ammonia concentration can be measured within the error of $\pm$0.18% assuming the error of 0.1 K in temperature measurement and 0.1 g in weight measurement.

• Atmosphere
• /
• v.27 no.2
• /
• pp.251-258
• /
• 2017

The standard weighing raingauges have a capacity limit in measuring the amounts of precipitation. Exceptions are those using a siphon to drain the collected water during observations. To reduce the drain time of the siphon type or to overcome the hassles associated with the manual emptying of the bucket for measuring, the most of weighing gauges use a large bucket for storing of rainwater to be measured. To avoid the above-mentioned adverse requirements, we propose a paired barrel for a weighing raingauge. The paired barrel may improve the accuracy of the weighing raingauges by getting rid of their capacity limit and make the gauges smaller in size and lighter in weight than the conventional ones. We showed its proper function and the feasibility of realization by testing a prototype paired barrel.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.6
• /
• pp.821-825
• /
• 2008

A fuzzy control algorithm is used to weigh alloy metal into electric arc furnace and implemented by using ladder program for programmable logic controller, where weight error and its derivative are used for input variables and vibration amplitude of alloy bin is used for output variable. Proposed fuzzy control algorithm is applied to the plant and results in higher measuring accuracy as well as faster measuring term than conventional on-off control system.

• The KIPS Transactions:PartD
• /
• v.11D no.3
• /
• pp.717-730
• /
• 2004

Recently. many researches on the personalization of a web-site have been actively made. The web personalization predicts the sets of the most interesting URLs for each user through data mining approaches such as clustering techniques. Most existing methods using clustering techniques represented the web transactions as bit vectors that represent whether users visit a certain WRL or not to cluster web transactions. The similarity of the web transactions was decided according to the match degree of bit vectors. However, since the existing methods consider only whether users visit a certain URL or not, users' interestingness on the URL is excluded from clustering web transactions. That is, it is possible that the web transactions with different visit proposes or inclinations are classified into the same group. In this paper. we propose an enhanced transaction modeling with interestingness weight to solve such problems and a new similarity measuring method that exploits the proposed transaction modeling. It is shown through performance evaluation that our similarity measuring method improves the accuracy of the web transaction clustering over the existing method.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.127-132
• /
• 2021

The intravenous injection monitoring system used by medical institutions was developed to remotely provide patients with the amount of intravenous injected and the termination point of the injection. In order to measure the amount of intravenous injection input, the weight or flow rate of the level going out from the inside to outside of the intravenous injection can be observed with a measuring sensor. The criteria for devices that apply herein are accuracy and vigilance. In addition, it is compact and should be easy to use when installing intravenous injection on patients. In medical institutions, the accuracy of the measured values must be high, and economically inexpensive devices are required. In this study, low-cost small-weight-centered load cell sensors were applied, and algorithms were applied to reduce the artefact by external movement by converging with gyro sensors for accuracy of measurements. As a result, it was possible to reduce the error of measurement, thereby improving the accuracy of the intravenous injection monitoring measurement value.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.91-99
• /
• 2010

The center of gravity on vehicle is a fundamentally important point for assessing and measuring the characteristics of vehicle dynamics. Especially, the center of gravity height on vehicles is the closest factor with respect to rollover accidents in a social issue nowadays. In this paper, the center of gravity height in conjunction with vehicle parameters of vehicle weight, driving axle and roof height after measured by vehicle weight and loading location by means of VCGM developed by KATRI with good performance that the accuracy was less than 0.6% and repeatability 0.3% for vehicles being used in the whole world was observed. As a result of study, the location of center of gravity height on vehicle was able to be estimated with only roof height on vehicle.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.101-101
• /
• 2022

Schisandra chinensis is a fruit which is called Omija in South Korea. The Korean word Omija means "five flavors" (sweet, spicy, sour, bitter, and salty). The aim of his study was to investigate the correlation between growth characteristics and lignans (gomisin A, gomisin N, schisandrin) contents of Schisandra chinensis. The method for determining lignans was validated by measuring the linearity, limit of detection (LOD), limit of quantification (LOQ), precision and accuracy using UPLC-UV. Growth characteristics of S. chinensis such as number of fruits per fruit bunch, length of fruit bunch, width of fruit bunch, fresh weight of fruit bunch, length of fruit, width of fruit, fresh weight of fruit, fresh weight of 30 fruits, and sugar contents of fruit were measured. From the results of correlation analysis, it was found that the contents of lignans showed a significantly negative correlation with fresh weight and sugar contents of fruit. These results will be used to study for quality control of S. chinensis fruit.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.4
• /
• pp.20-26
• /
• 2010

Any relative deformation between the cutting tool and the workpiece at the machining point, results directly in form and dimensional errors. The source of relative deformations between the cutting tool and the workpiece at the contact point may be due to thermal, weight, and cutting forces. This paper presents an investigation into dry and fluid machining with the objective of evaluating shape accuracy effect for the turning process of Al6061. The thermal distribution of cutting tool and cutting force was predicted using finite element method after measuring the temperature of the tool holder. To reach this goal, shape accuracy turning experiments are carried out according to cutting conditions with dry and fluid machining methods. The variable cutting conditions are cutting speed, depth of cutting and feed rate.