• 한국전자파학회논문지
• /
• 제30권2호
• /
• pp.169-172
• /
• 2019

FMCW 배열 안테나는 저비용 고해상도라는 장점 때문에 많은 분야에 널리 사용되고 있다. FMCW 배열을 이용하여 표적의 거리와 각도를 추정하기 위해서, 우선 deramped 수신신호로부터 거리-각도 행렬을 구성하고, 그 다음에 거리-각도 행렬에 2D-FFT와 같은 2차원 주파수 추정기법을 적용한다. 하지만, 이러한 주파수 추정기법은 bias 오차를 발생시키게 된다. 그 이유는 거리-각도 행렬의 두 개의 주파수가 서로 독립적이지 않기 때문이다. 따라서 FMCW 배열 안테나를 이용하여 표적의 거리-각도 동시추정을 위한 최대우도 기반 알고리즘을 제안하고, 거리와 각도 추정에 있어서 Cramer-Rao bound에 도달함을 보인다.

• 접착 및 계면
• /
• 제21권4호
• /
• pp.129-134
• /
• 2020

공액분자반도체와 고분자절연체 계면에서 전하트래핑을 이해하는 것은 장시간 구동가능한 안정성 높은 유기전계효과 트랜지스터(이하 유기트랜지스터) 개발을 위해 중요하다. 본 연구에서는 다양한 분자량의 고분자절연체를 이용한 유기트랜지스터의 전하이동 특성을 평가하였다. Polymethyl methacrylate (PMMA) 표면 위에 적층된 펜타센 공액반도체의 모폴로지와 결정성은 PMMA 분자량에 무관함이 나타났다. 그 결과 트랜지스터 소자의 초기 트랜스퍼 곡선과 전하이동도는 분자량에 상관없었다. 하지만, 적정한 상대습도 환경에서 소자에 바이어스가 인가되었을 경우, 바이어스 스트레스 효과로 불리는 드레인전류 감소와 트랜스퍼 곡선 이동은 PMMA 분자량이 감소할수록 증대됨이 관찰되었다(분자량 효과). 분자량 효과에 의한 전하트래핑은 회복이 매우 어려운 비가역적인 과정임을 밝혀 내었다. 이러한 분자량 효과는 PMMA 존재하는 고분자사슬 말단의 밀도 변화에 의한 것으로 판단된다. 즉, PMMA 고분자사슬 말단이 가지는 자유부피가 전하트랩으로 작용하여 분자량에 민감한 바이어스 스트레스 효과를 일으킨 것으로 판단된다.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.

• Journal of Animal Science and Technology
• /
• 제47권2호
• /
• pp.261-270
• /
• 2005

Total number of 237 Hanwoos were purchased from the nationwide fanns based on the different market weights and sex. After slaughtering, they were evaluated to estimate the productivity of carcass components by the sex and market weight, and to predict the beef carcass yield grade equation. The main results in this study were summarized as follows; With respect to carcass characteristics, the yield percentages were different(P < 0.01) among sex groups, but were not different among market weight groups. Sex or market weights showed significant effects on the carcass yield grade(YG) factors(BFT, RA, carcass weight(CW). The YG equation from this study could be expressed as a multiple regression y = 64.74 - 0.0198 ${\times}$ CW(kg) - 5.226 $\time$ BFT(cm)+0.1339 $\time$ RA($cm^2$ $R^2$ = 0.52 Among the YG factors, the BFT was the highest contributor to the YG equation. Compared the previous equation reported in 1992 with the equation from this study, the bias values between predicted value and the actual cutability were 9.17 and 2.39, respectively. In conclusion, the equation estimated from this study was more accurate in predicting the cutability than that from the previous equation reported in 1992.

• Communications for Statistical Applications and Methods
• /
• 제16권1호
• /
• pp.103-113
• /
• 2009

표본조사에서 무응답은 비 표본추출오차를 발생시키는 중요한 원인 중 하나이다. 단위무응답이 발생하는 경우 무응답에 의한 편향을 줄이는 동시에 추정의 정도를 향상시키기 위해 단위무응답 조정층을 구성해 무응답 가중치 조정을 하는 것이 일반적이다. 본 연구에서는 무응답 조정층 구성과 관련된 기존의 이론들을 정리하고 어업총조사 자료를 이용한 실증적인 모의실험을 통해 효과적으로 무응답 조정층을 구성하는 방안에 대해 살펴본다. 모의실험결과 응답성향에 따른 조정층 구성보다는 예측평균을 기준으로 한 조정층 구성이 효율성 측면에서 효과적인 것으로 나타났으며, 아울러 다른 관심변수에도 적용될 수 있는 로버스트한 조정층 구성을 위해서는 예측평균만을 고려하는 것보다 응답성향과 예측평균을 모두 고려한 조정층 구성방법이 효과적인 것으로 나타났다. 한편 무응답 조정을 위한 응답률 산출에 있어서 설계가중치의 적용 필요성에 대해 살펴본 결과 설계가중치 적용 여부는 추정결과에 거의 영향을 주지 않는다는 사실을 확인할 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권1호
• /
• pp.65-71
• /
• 2013

Two digestion trials, one with sheep and another with goats, were conducted to evaluate the long-term bias (LTB) of the indigestible dry matter (iDM), indigestible neutral detergent fiber (iNDF) and indigestible acid detergent fiber (iADF) internal markers. The study used eight Santa In$\hat{e}$s castrated male sheep (average body weight of 16.6 kg) distributed in two $4{\times}4$ Latin squares and eight Saanen castrated male goats (average body weight of 22.6 kg) distributed in two $4{\times}4$ Latin squares. The experiments were conducted simultaneously, and the animals were housed in 1.2 $m^2$ individual pens with wood-battened floors equipped with individual feeders and drinkers. The animals received isonitrogenous diets that were offered ad libitum and contained 14% crude protein and 70% sugar cane (with 0, 0.75, 1.5 or 2.25% CaO, in natural matter percentage), corrected with 1% urea and 30% concentrate. The experiment consisted of four experimental periods of 14 d each, with the feed, leftovers and feces sampled on the last four days of each period. The marker concentrations in the feed, leftovers and fecal samples were estimated by an in situ ruminal incubation procedure with a duration 240 h. The relationship between the intake and excretion of the markers was obtained by adjusting a simple linear regression model, independently from the treatment (diets) fixed effects and Latin squares. For both the sheep and goats, a complete recovery of the iDM and iNDF markers was observed (p>0.05), indicating the absence of LTB for these markers. However, the iADF was not completely recovered, exhibiting an LTB of -9.12% (p<0.05) in the sheep evaluation and -3.02% (p<0.05) in the goat evaluation.

• Journal of the Korean Data and Information Science Society
• /
• 제27권2호
• /
• pp.315-325
• /
• 2016

조사결과의 신속성이 요구되는 선거여론조사의 특성상 짧은 시간에 유권자들의 의견을 파악할 수 있고 저렴한 조사비용이라는 장점 때문에 낮은 응답률이라는 심각한 결함에도 불구하고 대부분 선거여론조사는 전화조사로 이루어진다. 현재 국내에서 실시되는 많은 선거여론조사는 연령별, 성별, 지역별 인구수 또는 유권자수에 비례하여 할당된 수만큼 조사하는 방식을 취하고 있다. 무응답이 발생하여 초기에 할당된 수만큼 조사가 이루어지지 않은 경우, 응답자들의 가중치를 조정하여 추정하는 방법을 사용한다. 본 연구에서는 무응답이 존재하는 경우, 현재 국내 여론조사에서 사용하는 추정량의 편의와 분산의 편의를 수리적으로 도출하였다. 이 편의는 응답집단과 무응답집단 간의 의사 차이와 무응답률의 크기에 비례한다. 또, 2012년 대선 선거여론 조사 자료를 기초로 전화 선거여론조사에서의 응답률을 산출하였는데, 평균 약 14.4%에 불과하였다. 한편, 자체적으로 실시한 '전화 선거여론조사에 대한 의식조사'에서, 응답자들이 전화 선거여론조사에 응답하지 않는 가장 큰 이유로 "귀찮아서"를 가장 많이 선택하였고, 여론조사 응답률이 가장 낮은 20대가 가장 많이 선택한 이유도 "귀찮아서"였다. 따라서 응답률을 높이기 위해서는 인센티브를 지급하는 등 조사대상자들의 응답 동기를 높이기 위한 보다 적극적인 노력이 필요하다.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.613-625
• /
• 2015

This research was conducted to provide basic data to improve expressivity required for virtual clothing to replace actual clothing. For the experiment, 6 materials were selected and 12(2 kinds of length) actual flared skirts were made. At the same time, simulations were carried out on OptiTex Runway 12.0 for 36(12 kinds of skirts $\times$ KES, FTU, KES weight/10) kinds of virtual flared skirts, which were applied with the measured property values (thickness, weight, bending, shear, friction, and stretch). Also, the study compared and analyzed the wearing images, silhouette overlapping images, and skirt length measurements of the actual and virtual skirts put on a dummy. As a result, the actual skirts showed clear distinction for each material. In contrast, virtual 1 and 2 expressed fabric 3 in the most similar way, but could not recreate the uniform, soft, and natural flare shape of the actual skirts in general. Virtual 3 formed natural flares as those of the actual skirts, and expressed fabric 1, 5, and 6 in a similar way. However, virtual 3 had too much volume and barely showed any distinction for each material. All of virtual 1, 2, and 3 expressed different flare shapes on the front and back sides of the skirt similarly to the actual skirts, and had a good visual expression for the color and texture of the materials. However, they could not effectively express the elasticity and fabric sagging in the bias direction.

• 한방비만학회지
• /
• 제20권1호
• /
• pp.52-68
• /
• 2020

Objectives: The purpose of this study is to investigate the weight loss effects of auricular acupuncture in obese patients. Methods: Six databases (Research Information Sharing Service [RISS], Korean studies Information Service System [KISS], Oriental Medicine Advanced Searching Integrated System [OASIS], PubMed, The Cochrane Library, China National Knowledge Infrastructure [CNKI]) were searched up to May 20, 2020. Eight eligible randomized controlled trials were included the present study. The quality of included studies was assessed by the Cochrane risk of bias tool and a meta-analysis was performed by Review Manager software. A meta-analysis was conducted using a random-effects model and a subgroup analysis was performed to detect the sources of heterogeneity, identify the selection of acupuncture methods and explore its contributions to the weight loss effects. Results: Among 8 trials, 5 trials used auricular acupuncture and 2 trials used auricular acupressure, 1 trial used both types of intervention. Most commonly selected acupoints were Shenmen (TF4) and stomach (CO4). Treatment duration was six to twelve weeks, and total treatment session was six to twelve. Compared to the control groups, auricular acupuncture significantly decreased body weight, body mass index (BMI), high density lipoprotein-cholesterol (HDL) and ghrelin. For the selection of acupuncture methods, both methods performed similarly in most outcome except waist circumference (WC), body fat percentage (BFP), and triglycerides (TG). Conclusions: We found that auricular acupuncture can be effective for weight loss and controlling appetite. However, the findings should be interpreted with caution due to heterogeneity. So further vigorous and well-designed studies should be conducted to strengthen the evidence of the use of auricular acupuncture for obesity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.232.2-232.2
• /
• 2015

Piezoelectric force microscopy (PFM) is a powerful method to characterize inversed piezoelectric effects directly using conductive atomic force microscopy (AFM) tips. Piezoelectric domains respond to an applied AC voltage with a characteristic strain via a contact between the tip and the surface of piezoelectric material. Electroactive piezoelectric polymers are widely investigated due to their advantages such as flexibility, light weight, and microactuation enabling various device features. Although piezoelectric polymers are promising materials for wide applications, they have the primary issue that the piezoelectric coefficient is much lower than that of piezoelectric ceramics. Researchers are studying widely to enhance the piezoelectric coefficient of the materials including nanoscale fabrication and copolymerization with some materials. In this report, nanoscale electroactive polymers are prepared by the electrospinning method that provides advantages of direct poling, scalability, and easy control. The main parameters of the electrospinning process such as distance, bias voltage, viscosity of the solution, and elasticity affects the piezoelectric coefficient and the nanoscale structures which are related to the phase of piezoelectric polymers. The characterization of such electroactive polymers are conducted using piezoelectric force microscopy (PFM). Their morphologies are characterized by field emission-scanning electron microscope (FE-SEM) and the crystallinity of the polymer is determined by X-ray diffractometer.