• 한국기계가공학회지
• /
• 제18권2호
• /
• pp.102-107
• /
• 2019

The vehicle market has developed environment-friendly vehicles to comply with fuel economy regulations and exhaust regulations that have become stricter and stricter over time. Many studies have been conducted to improve the travel performance and fuel economy of environment-friendly vehicles, and vehicle manufacturers have been studying how to manufacture light-weight vehicles in order to improve the fuel economy of both existing vehicles and the newer environment-friendly vehicles. Exemplary light-weight vehicle technologies optimizes the design of the vehicle body structure, which is a vehicle weight-reducing method that modifies component shapes or layouts to optimize the structure of the vehicle. In addition, the new process technology uses new light-weight and very strong materials, and not typical materials, to manufacture light-weight vehicles. This study aims at the optimal design of vehicle body structures using multi-materials for the Fender-Apron, which is an important frame member for the external front side of a vehicle body, by conducting FEA (Finite Element Analysis) and multi-material bonding.

• 신재생에너지
• /
• 제7권3호
• /
• pp.6-16
• /
• 2011

In order to study the utilization of seaweeds as an alternative renewable feedstock for bioethanol production, their properties of hydrolysis and fermentation were investigated. The seaweeds were well hydrolyzed with diluted sulfuric acid. The weight loss of seaweeds reached 75-90%, but only 12-51% of them was converted into reducing sugars after the acid-hydrolysis at $130^{\circ}C$ for 4-6h. The yield of reducing sugars increased with increasing the hydrolysis time up to 4h and then decreased thereafter. In contrast, the ethanol yield from the hydrolysates increased with hydrolysis time except for green seaweeds maximizing at 4h. Optimal fermentation time by Saccharomyces cerevisiae (ATCC 24858) varied with seaweeds; 48h for green seaweeds, 96h for brown and red seaweeds. The ethanol yield from the hydrolysate reached 138${\pm}$37mg/g-dry for green seaweeds, 258${\pm}$29mg/g-dry for brown seaweeds, and 343${\pm}$53mg/g-dry for red seaweeds, which correspond to approximately 1.5-4.0 times more than the theoretical yield from total reducing sugars in the hydrolysates. The results obtained indicate clearly that the non-reducing sugars or oligosaccharides dissolved in the hydrolysate played an important role in producing bioethanol. Considering the productivity and production cost of each seaweed, brown seaweeds such as Laminaria japonica and Undaria pinnatifida seem to be a promissing feedstock for bioethanol production.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2001년도 제18차 정기총회 및 학술발표 PROCEEDINGS
• /
• pp.86-88
• /
• 2001

본 시험은 broiler performance, litter N농도가 어떻게 유지되며, NH3 gas 농도가 사료에 ammino acid와 Vitamin D를 보충하여 litter에 Alum을 첨가하여 저수준 단백질 수준을 감소시키는지 결정하기 위해 실시하였다. 이 실험은 각각 처리마다 3반복 90마리를 세가지의 다른 단백질 수준을 가지고서 starter period(1-214)와 grower period(22-420)로 나누었다. 단백질처리는 각기 starter에는 평균 23.0(control 71), 20.4(W)와 18.0(73)%로 grower에서는 21.0(control 71), l9.3(n) and 17.o(73)%로 구성된다. control과 비교하면 ammino acid 수준은 비슷하다. Alum은 rice bran kg당 2009에 Control을 제외하고 각 처리구에 혼합했다. 결과는 3wks와 6wks 동안 급여한 사료에서 Control이하인 저수준 단백질은 feed gain은 증가하였으며, feed intake와 weight gain은 감소하였다. 그러나 처리간에는 유의차(P<0.05)가 없었으며 Alum을 litter에 혼합할 때(P<0.05) 저수준 단백질은 NH3 gas농도가 74.8-80.9% 감소되었다. litter에 Alum을 첨가하는 조작은 NH3 gas농도를 감소시킨다는 것을 보여준다.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.130-140
• /
• 2016

Floating floor is most commonly used at apartment houses in Korea for thermal insulation and reducing impact noise. But it in proven that the floating floor is not effective for reducing the floor impact noise in low frequency range. In most cases, impact sound pressure level under 63 Hz frequency band were actually increased by the resonance of resilient material, lightweight concrete and the finishing mortar installed on it. In this paper, an integrated floor system consist of 70 mm light weight concrete and 40 mm finishing mortar successively installed on the concrete slab was suggested to avoid the resonance. Integrated floor system increases total flexural stiffness and mass per unit area. The natural frequencies of first and second vibration mode were increased and acceleration response and floor impact sound level was decreased in all measurement range.

• 콘크리트학회지
• /
• 제6권6호
• /
• pp.135-142
• /
• 1994

본 연구는 고유동성, 고강도 및 고내구성을 가진 고성능 콘크리트를 실용화시키기 위하여 국내에서 시판되고 있는 9종류의 고성능 감수제를 사용한 콘크리트의 품질 특성을 평가하였다. 이를 위하여 혼화제 첨가량에 따라서 굳지 않은 콘크리트의 슬럼프, 공기걍, 단위중량 및 감수율과 경화콘크리트의 압축강도비를 비교분석하였다. 본 시험결과, 국내 시판되는 고성능 감수제를 사용한 콘크리트의 공기연행 효과는 거의 없었으며 또한, 보통강도 및 고성능 콘크리트 각각에 대하여 최적혼화제 첨가량이 존재함을 알아냈다.

• Biomolecules & Therapeutics
• /
• 제6권1호
• /
• pp.89-94
• /
• 1998

CJ50001 is a recombinant human granulocyte colony-stimulating facto, (rHuG-CSF) that stimulates the formation of neutrophils from bone marrow stem cells. It was produced in E. colt and purified through refolding and several processes. We produced CS970125(300) using purified C150001 and additives in order to test the stability of CJ50001. When CS970125(300) was stored at 50'S for more than 1 week, high molecular weight proteins were formed and those proteins were detected by non-reducing SDS-PAGE, gel filtration HPLC, and Western blot. Those proteins showed single band at the same position of CJ50001 in reducing SDS-PAGE. These data indicated that those high molecular weight proteins were the multimers of C150001. In biological assays, iu viro and in viro, the multimers did not have biological activity and inhibitory action to that of CJ 50001. The mutimers did not induce toxicity in mice and rats in acute toxicity test. These results suggest that if Cs970125(300) containing CJ50001 is stored at 5$0^{\circ}C$, CJ50001 will be the multimers that do not have biological activity and inhibitory effect to CJ50001 and do not induce acute toxicity.

• Computers and Concrete
• /
• 제11권1호
• /
• pp.63-73
• /
• 2013

In this study, the effect of reducing cement by proportional addition of waste powder rubber on the performance of concrete under impact three-point bending loading were investigated experimentally and numerically. Concrete specimens were prepared by adding 5%, 10% and 20 % of rubber powder as filler to the mix and decreasing the same percentage of cement. For each case, three beams of $50mm{\times}100mm{\times}500mm$ were loaded to failure in a drop-weight impact machine by subjecting them to 20 N weight from 300mm height, while another three similar beams were tested under static load. The bending load-displacement behavior was analyzed for the plain and rubberized specimens, under static and impact loads. A three dimensional finite-element method simulation was also performed by using LUSAS V.14 in order to study the impact load-displacement behavior, and the predictions were validated with the experimental results. It was observed that, despite decreasing the cement content, the proportional addition of powder rubber until 10% could yield enhancements in impact tup, inertial load and bending load.

• 응용통계연구
• /
• 제27권7호
• /
• pp.1229-1241
• /
• 2014

이상점과 무응답이 동시에 존재하는 경우에는 무응답만 있는 경우에 비해 무응답 대체의 성능이 떨어지게 된다. 이러한 경우에는 먼저 이상점을 탐지하고, 탐지된 이상점의 영향력을 축소한 후 무응답 대체를 실시하여야 한다. 본 논문에서는 이상점의 영향력을 축소하여 무응답 대체법의 성능을 향상시키는 방법을 연구하였다. 이를 위해 She and Owen (2011)이 제안한 이상점 탐지법을 살펴보았고, 탐지된 이상점의 영향력을 줄이기 위한 방법으로 흔히 사용되는 가중치 조정법과 이상점 대체법을 살펴보았다. 또한 이상점 처리 방법을 적용한 무응답 대체법을 살펴보았으며 모의실험과 사례분석을 통하여 이상점 영향력 축소 효과를 살펴보았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1278-1282
• /
• 2005

Air mattress is now used widely to prevent the pressure ulcer by reducing the localized pressure peaks. In this paper an air-cell mattress and its pressure control method based on an approximate anthropometric model are presented. The air-cell mattress has eighteen cylindrical air cells made of porous material allowing air leakage to contribute in reducing the development of pressure ulcer by lowering the pressure peak, temperature and humidity. To determine an optimal air-cell pressure appropriate for each user, we divide the parts of the body into four sections such as head, trunk, hip, and leg. Then, the pressure of each section is independently calculated from the weight of each part based on the individual body height and weight and the approximate anthropometric model. Air supply system for the air-cell mattress is implemented by using four electronic solenoid valves and an air compressor, and it is driven by a real-time micro-controller. The experimental results with seven subjects shows that the proposed air-cell mattress is effective for the prevention of the pressure ulcer.

• 한국의류학회지
• /
• 제29권1호
• /
• pp.149-156
• /
• 2005

The purpose of this study was to produce the high quality of electromagnetic wave shielding fabrics. In this study, we have produced polyester fabrics by electroless Ag plating. The untreated polyester was etched with $4\%$ NaOH solution added accelerant(Benzyl Dimethyl Dodecyl Ammonium Chloride) then it was catalyzed by $SnCl_2$ solution and activated by $PdCl_2$ solution. Electroless Ag plating was carried out by changing conditions such as temperature. time, weight loss rate of polyester and kind of reducing agents. The electromagnetic wave shielding effectiveness of polyester fabric by electroless Ag plating was measured by RF Impedance Analyzer and element of electromagnetic wave shielding substance was measured using Electron probe micro analyzer. The results were as follows; The plating bath using potassium sodium tartrate by reducing agent was excellent electromagnetic wave shielding effectiveness. Element of electromagnetic wave shielding substance was silver. Electromagnetic wave shielding effectiveness was shown over 64dB at the temperature of $40^{\circ}C$, treating time 30min., weight loss rate $20\%$.